Will Spare Tire Carrier part # 413200 work on 8 Lug Wheel part # AM20766

Question

Question:

Hello, is this spare tire Code:413200 carrier fit Dexstar Steel Wheel 16inch x 6inch Rim-8 Code: AM20766? Thanks.

asked by: Serkan O

0

Expert Reply:

Yes, the spare wheel carrier part # 413200 that you referenced is confirmed to work on 8 lug wheels like the part # AM20766.

expert reply by: Jameson C

0

Answer 1

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 2

I would get a 1/2 inch diameter bolt about 2 inches long with a matching nut to secure your wheel to the Spare Tire Carrier #413200. This carrier will work with wheels that have 6 on 5-1/2 inch bolt pattern.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

Good news, I can help find you replacement lights for your Featherlite Trailer. I was able to find LED stop/tail/turn lights that will be compatible with your Truck Lite weathertight plug. I have attached them to this page for your convenience. If…

view full answer...

Answer 6

The 15x6 inch wheel #AM20535 will accept 205/75-15 tires, 225/75-15 tires, and 7.00-15LT tires. I have linked the 15 inch tires we carry for you. For a valve stem you can use #AM20904.

view full answer...

Answer 7

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

view full answer...

Answer 8

We have the Titan version of the coupler you need as Titan Weld-On Coupler part #T1755000 which fits a 3 inch channel and is designed for a 2-5/16 inch hitch ball too.

view full answer...

Answer 9

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 10

In order to see if there is an 8 or 6 lug replacement hub and drum assembly that will fit the axle on your trailer, you will want to first pull the existing hub. Once the hub is pulled, check for the bearing numbers that should be stamped onto the…

view full answer...

Answer 11

We will need some more information in order to track down a new hub to fit your assembly K-H 71744. Pull off your old hub and look for numbers stamped into the bearings. If you do not see the numbers then you will need to use 4" Carbon Fiber…

view full answer...