To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima 60" CoreBar MD:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Honda CRV, we're going to be testing the Yakima round bar roof rack system, consisting of part numbers Y00409, these are the round 58 inch cross bars, part number Y00146, these are the baseline tower for the Yakima cross bars, and part number Y03536, which is the round bar SL adapter kit for the Yakima baseline towers, and part numbers Y06148 and Y06152, which are the base clip fit kits for the Honda CRV. The Yakima round bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. The two bars have a combined carrying capacity of 165 pounds although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. Both of the end caps do come with knock outs which you can replace with the Yakima same key system so you can actually utilize this with your Yakima accessories and make everything key alike. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and our next step is to install our base tower to the other end of our bar. So we'll take our baseline tower, take this plastic adapter piece, and that gets pushed on the top here till you hear a couple clicks. Then we'll take our round bar adapter, place that, line up with the screw, then we'll come around to the front of the baseline tower, pull this portion out so we can see the screw that we need to tighten down with our included tool.
Now as we tighten this down, we just want to loosely tighten it up, because we want to still be able to move it along our bar to get our spread between our towers accurate. Slide it on, and we'll put our end cap on here so it doesn't slide back off. And then we'll get our proper spread between our towers. You can find this measurement in your instructions. Once you have it where it needs to be, we'll tighten it down the rest of the way. Now the nice thing about this tool, once you tighten this down, you'll actually hear audible clicks to let you know that you've tightened it to its proper specification and this is also so you don't over tighten it as well. Another thing I'd like to take note, you see these three notches here and this knob here.
Now if we we're to loosen that up, if I was to move this, you can see that the foot moved a little bit. So with this particular vehicle, we want it set towards the back of the car, as you can see here. Next we'll take our foot pad here from our fit kit and we'll push that into place as well. At this point, you can also put your clamps into place, but I like to wait for that after I set this on the vehicle and get the spacing set up so I don't possibly scratch up or damage the vehicle with the clamps still in place. We'll set our bars into place. First we're going to make sure that they're even on both sides, but then we're going to measure from center of the bar to center of the bar for our crossbar spread and this measurement you will find in your instructions.
Now we'll open up our doors, insert our clamps, and start to tighten them down. So we'll take our clamps, you can see this open portion here, that'll hold in like so and you can see this kind of hovering above our door edge here. To lower that down, we'll go to this screw, tighten it down, that'll lower it into place. Then we'll come to the center here. And right now, we'll just snug it up against the door and we'll repeat this process for our driver side.
You can close that up now and our final step is to add our end caps, which you can see these two portions here, these two hooks go into these two areas on our end cap. We'll put those into place, and then we'll load up our gear and hit the road. And there you have it for the Yakima round bar roof rack system on our 2016 Honda CRV.
Average Customer Rating: 4.8 out of 5 stars (170 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Follow the instructions, and you can't go wrong on the self installation
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
I ordered the wrong set up for my car, but the excellent customer service specialist set me up and expedited my roof rack that fit perfectly. I highly recommend calling and speaking with the knowledgeable staff about your needs. I'm super happy with the experience overall!
Well packaged and on time
Was skeptical at first because I needed the posts as well for my 2011 Honda Element. The Honda crossbars were not adequately weight rated and is why I opted for Yakima. Couldn't be happier with my choice as this assembly has served me well throughout the year.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Item was as described and shipping was fast. Overall very satisfied with trailer. Will definitely order my stuff from them
Great product fast shipping
Great! Easy to install!
I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you!
Solid build quality and easy installation on my '21 Mazda CX-5.
I did a lot of research before purchasing my roof rack. I came across this website and liked the prices, and after much thought, decided to get the Yakima CoreBar crossbars. I received my roof rack within a couple days of ordering! It's extremely sturdy and doesn't make hardly any wind noise. I love it and it looks great on my car, couldn't be happier with my purchase!!
George J.
Like to say thank you .
The roof rack for my 2022 trail boss looks great.
etrailer.com And Yakima roof racks has a VERY good product .
I would have given you guys more stars if I could.
Shipping Time , boxing of the product and the way everything went together was
A #1. Easy and fast.
Also, removal just as fast.
Thanks again.
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!
Product was packaged well, arrived in perfect condition.
Instructions easy to follow. Installation took less than (1) hour. I did it alone & I’m 76 yrs. old.
Is very sturdy. Looks good on my 5 door Subaru.
The feature that impressed me the most in dealing with your company was how I was able to track my package inside your facility with the name of the employee handling the item before it even shipped. Very organized. Would definitely recommend you to others & purchase from you again.
Nicole was beyond helpful!!!!!
I have truly enjoyed this system. It allows our family of five plus our dog to stretch out in the car while our gear is secured on the roof. It takes a bit to mount it but I want it secure and it does fine with a roof box at interstate speeds. I absolutely recommend this system.
Good transaction. Arrived quickly, new in box.
We purchased the Yakima Skyline Towers roof rack with the Jet Stream crossbars. Took about 2 hours to install on the naked roof of our Flex. I drilled through the roof strip for the mounting bolts and they fit tighter than the factory rails. Very happy with our choice.
Perfect. Perfect. Easy to install and high quality. Confident in this product. Excellent instructions. Used with towers of course! Towers and crossbars have demonstrated to be strong and durable with several trips with kayaks.
Roof rack parts were ordered correctly and shipped quickly.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.