Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger

Question

Question:

I want to add a roof rack and a fishing rod holder capable to hold at least 4 fishing rods. Any suggestions ?

asked by: Oliver

1

Helpful Expert Reply:

The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish.

The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing Rod Carrier part # Y04089 for a cost effective option or the Yakima TopWater Rooftop Fishing Rod Carrier part # Y04088 for a premium option. The ReelDeal and TopWater both allow for up to eight fishing rods to be carried and have locks for security. The TopWater however offers much more protection from the elements.

expert reply by: Conner L

1

Answer 1

I spoke a representative from Yakima about the Lift Brackets for Yakima ReelDeal or Big PowderHound and PowderHound Carriers - Qty 2, part #Y8860037. They said these brackets will give you almost 4" of additional clearance. The lift brackets do…

view full answer...

Answer 2

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 3

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 4

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 5

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 6

The correct Thule roof rack that fits your 2024 Jeep Grand Cherokee with flush rails is the Wingbar Evo roof rack part numbers #TH711220, #TH710601, #TH68FE. The Wingbar crossbars are the quietest and most aerodynamic so they'll work really great…

view full answer...

Answer 7

Landing pad covers #Y8890029 are really the only option. You could always uninstall before the wash and reinstall the crossbars after if you don't like the way it looks. You could also stick to brushless car washes where nothing could get caught…

view full answer...

Answer 8

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

Hey Dave, the Yakima Rod Carrier part #Y04089 does require that rods longer than 7 feet need to get broken down. This is a cautionary statement due to the flex of rods on that forward clamp. Some rods may have too much flex from the headwinds and…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

view full answer...

Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching