Replacement Claws for Yakima Roof Systems

Question

Question:

Will any of these claws in the picture work for Hyundai 2019 Santa Fe with naked roof?

asked by: Ellie

0

Expert Reply:

The claws in your picture look similar to the Replacement Large Claw Assembly for Yakima Railgrab item # Y80144. I have attached a graph showing what type of Yakima claws fit what kind of roof rack to assist you in matching up your rails to the correct claws. I have linked our selection of replacement claws.

Yakima also makes a roof rack system for your 2019 Hyundai Sante Fe the roof rack Includes:

Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 Item # Y00425

BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06151

BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06154

expert reply by: Jerred H

0

yakima claws chart for rail fitment
(click to enlarge)

customer pic of claws for yakima
(click to enlarge)

Answer 1

Choosing the correct claws for your 2014 Volvo XC70, will depend on the height of your factory rails. -If your rail height is less than 1-1/16" (27 mm), you can use the Replacement Small Claw Assembly for Yakima RailGrab Roof Rack Towers…

view full answer...

Answer 2

The Yakima Railgrab will Medium Claws for Yakima RailGrab Roof Rack Towers - Qty 2 #Y8880205 are what I believe are the correct fit for your 2018 VW Tiguan. I've attached a photo that shows the first three styles being the smaller fit, the next…

view full answer...

Answer 3

It sounds like you are needing the lid supports for your Yakima SkyBox 16, part #Y07335. We have that here. It's part #8880683. These may look a bit different than what you are used to, but that is because Yakima has updated their supports. This…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Replacement Claws for Yakima Roof Systems

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching