Will the Erickson Ladder Rack Fit My 2021 Honda Ridgeline?

Question

Question:

Can you let me know what the min/max width that the support beams can reach on a truck bed? I have a 2021 Honda Ridgeline RTL with bed dimensions of 60L x 50W. Will this fit the 50inch width?

asked by: Austin H

0

Expert Reply:

I have a great solution for you. Unfortunately, I confirmed with Erickson that the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 is not confirmed to fit your 2021 Honda Ridgeline with bed dimensions of 60"L x 50"W. In addition, we currently don't carry any truck-bed ladder racks that will fit your vehicle.

For a great alternative solution for transporting a ladder rack or other long cargo, I recommend the Rhino-Rack T-Load Extender # RTL002 along with a single crossbar on your cab. If you have factory crossbars already on your cab, you will be able to use the crossbars with the ladder. If you have a bare roof or raised side rails, I recommend the following setups.

If you have a bare roof, I recommend these parts:
- Yakima JetStream Crossbar - 60" # 8880652 (silver) or # 8880649 (black)
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06152
- (optional for extra security) Yakima Same-Key Lock Cores # Y07202

If you have raised factory rails, I recommend the following parts:
- Yakima JetStream Crossbar - 60" # 8880652 (silver) or # 8880649 (black)
- TimberLine Towers for Yakima Crossbars - Raised Side Rails # Y33TR
- (optional for extra security) Yakima Same-Key Lock Cores # Y07202

This single crossbar setup along with the Extend-A-Truck will allow you to transport a ladder or other large cargo on your 2021 Honda Ridgeline. For securing straps for your cargo, I recommend the etrailer Cam Buckle Cinch Straps w/ Buckle Protectors # E98876-4. I went ahead and attached a photo of a neighbor that used the GoalPost with a single crossbar to haul a ladder.

The Extend-A-Truck will be able to attach to your factory 2-inch hitch receiver on your Ridgeline.

expert reply by: Bob C

0

Thule GoalPost # TH997 with 1/2 Crossbar System
(click to enlarge)

Answer 1

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

view full answer...

Answer 2

We do! It sounds like you're looking for the Du-Ha Truck Storage Box and Gun Case #DU50074 which installs under the rear seat of your 2023 Honda Ridgeline. This kit comes with the ability to be an empty box or you can install the inserts to hold…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 10

On your Curt TriFlex Trailer Brake Controller #C24VV, the decimal point as you put it is standby mode with no trailer connected. The blank screen is also standby mode and that screen is what is seen when simply starting the vehicle, but that screen…

view full answer...

Answer 11

It's very easy to install a trailer brake controller on a 2021 Honda Ridgeline. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 which comes with a harness that you could simply attach to the one that came with the…

view full answer...

Answer 12

To install the Curt Assure brake controller part #C49UR in your 2021 Honda Ridgeline the correct install harness is the part #C51392. The other harness was designed for other vehicles and not yours.

view full answer...

Will the Erickson Ladder Rack Fit My 2021 Honda Ridgeline?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching