To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Honda CRV, we're going to be testing the Yakima round bar roof rack system, consisting of part numbers Y00409, these are the round 58 inch cross bars, part number Y00146, these are the baseline tower for the Yakima cross bars, and part number Y03536, which is the round bar SL adapter kit for the Yakima baseline towers, and part numbers Y06148 and Y06152, which are the base clip fit kits for the Honda CRV. The Yakima round bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. The two bars have a combined carrying capacity of 165 pounds although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. Both of the end caps do come with knock outs which you can replace with the Yakima same key system so you can actually utilize this with your Yakima accessories and make everything key alike. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and our next step is to install our base tower to the other end of our bar. So we'll take our baseline tower, take this plastic adapter piece, and that gets pushed on the top here till you hear a couple clicks. Then we'll take our round bar adapter, place that, line up with the screw, then we'll come around to the front of the baseline tower, pull this portion out so we can see the screw that we need to tighten down with our included tool.
Now as we tighten this down, we just want to loosely tighten it up, because we want to still be able to move it along our bar to get our spread between our towers accurate. Slide it on, and we'll put our end cap on here so it doesn't slide back off. And then we'll get our proper spread between our towers. You can find this measurement in your instructions. Once you have it where it needs to be, we'll tighten it down the rest of the way. Now the nice thing about this tool, once you tighten this down, you'll actually hear audible clicks to let you know that you've tightened it to its proper specification and this is also so you don't over tighten it as well. Another thing I'd like to take note, you see these three notches here and this knob here.
Now if we we're to loosen that up, if I was to move this, you can see that the foot moved a little bit. So with this particular vehicle, we want it set towards the back of the car, as you can see here. Next we'll take our foot pad here from our fit kit and we'll push that into place as well. At this point, you can also put your clamps into place, but I like to wait for that after I set this on the vehicle and get the spacing set up so I don't possibly scratch up or damage the vehicle with the clamps still in place. We'll set our bars into place. First we're going to make sure that they're even on both sides, but then we're going to measure from center of the bar to center of the bar for our crossbar spread and this measurement you will find in your instructions.
Now we'll open up our doors, insert our clamps, and start to tighten them down. So we'll take our clamps, you can see this open portion here, that'll hold in like so and you can see this kind of hovering above our door edge here. To lower that down, we'll go to this screw, tighten it down, that'll lower it into place. Then we'll come to the center here. And right now, we'll just snug it up against the door and we'll repeat this process for our driver side.
You can close that up now and our final step is to add our end caps, which you can see these two portions here, these two hooks go into these two areas on our end cap. We'll put those into place, and then we'll load up our gear and hit the road. And there you have it for the Yakima round bar roof rack system on our 2016 Honda CRV.
Average Customer Rating: 4.8 out of 5 stars (209 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Follow the instructions, and you can't go wrong on the self installation
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
product was just what I needed The folks at etrailer were extremely helpufl!!
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
Solid build quality and easy installation on my '21 Mazda CX-5.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Love it! We've made several long trips with full luggage loads.
Well packaged and on time
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
Great product fast shipping
Great! Easy to install!
Great service and great staff. They will have all the technical information you need.
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.
SIMPLE & EASY1
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.