Converting Yakima Timberline Towers To Work With Yakima Jetstream Crossbars

Question

Question:

Hello, I have Yakima Timberline towers and round bars. I would like to purchase the Jetstream bars but I dont think I have the correct clips that attach the jetstream bars to the timberline mounts. Do the attachment pieces come with jetstream bars?

asked by: Mike C

0

Expert Reply:

All you need is this T-Bolt Adapter # Y03541. It will take the place of your RoundBar Adapter # Y03536 and will work with the Jetstream Crossbars # Y00426

expert reply by: Adam E

0

Answer 1

We do offer one of those parts, which are the replacement end caps for your crossbars (which you mentioned were Streamline though I believe you were referring to the JetStream). What you need for those is the Replacement Endcaps for Yakima…

view full answer...

Answer 2

The Thule Hullavator Pro #TH898 is compatible with the Yakima JetStream bars as long as they stick out past the side of your SNUGTOP truck cap 4" - 8" so that it doesn't make contact with your truck cap (see attached photo).…

view full answer...

Answer 3

The Thule Hullavator load-assisted kayak carrier #TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima…

view full answer...

Answer 4

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…

view full answer...

Answer 5

Thanks for the pictures! The EcoHitch Stealth Trailer Hitch Receiver item #306-X7393 does not require any cutting or removal of splash guards or trim. The hitch receiver sticks out through that opening below the bumper cover on your second picture…

view full answer...

Answer 6

You can certainly use a 60 inch long crossbar such as the Yakima #Y00426 JetStream. In order to attach the crossbar to your current roof rails, you'll also need the #Y33TR Yakima TimberLine towers. If you click the provided link, you can see a…

view full answer...

Answer 7

The Hullavator Pro Kayak Carrier #TH898 can be installed around square crossbars or onto T-track crossbars like the Yakima JetStream Crossbars #Y00425. I attached the detailed installation instructions below. A quick summary though is to install the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Converting Yakima Timberline Towers To Work With Yakima Jetstream Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching