Valterra RV Gravity Fill Water Inlet
(52 reviews)
Price: $15.04
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (52)
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Water Inlets - A01-2003VP
- Gravity Fill Inlet
- White
- 4-1/2 Inch Diameter Flange
- 3-1/2 Inch Diameter Cutout
- Plastic
- Surface Mount
- Valterra
- Plastic
- 1/2 Inch Deep
Replace your gravity fill fresh-water inlet with this flush mounted model. Barbed connecter fits 1-1/8" and 1-1/4" hose. Built in 1/2" vent lets air in and out of your tank for smooth flow.
Features:
- Gravity fill fresh-water inlet replaces worn out inlet on your RV
- Barbed connection works with 1-1/8" and 1-1/4" hose
- Air vent attaches 3/8" tubing to tank so water flows out smoothly
- Allows air to escape as you fill the fresh-water tank
- Bayonet style cap for quick reliable seal
- White UV-stabilized plastic construction
- Easy installation with included putty and hardware
- Mounts flush against exterior wall
Specs:
- Overall diameter: 4-1/2"
- Cutout diameter: 3-1/2"
- Interior connections:
- Gravity fill: 1-1/8" and 1-1/4" barbed
- Air vent: 1/2" barbed
- 1-Year warranty
A01-2003VP Valterra Water Inlet for RVs - White - Gravity Fill
Video of Valterra RV Gravity Fill Water Inlet
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Fresh Water - Water Inlets - A01-2003VP Review
Today, we're going to take a look at the Valterra Gravity Fill Water Inlet for RVs. This one is white in color. Now, this water inlet for RV is a gravity fill design. It's made of a UV-stabilized plastic. Right here you can see it does have a 1/2 inch air vent for a fast fill. It does use use a bayonet style cap for a quick, reliable seal.
Just twist it, and it locks it into place, and you can see when you remove it the cap's connected to this nice tether. Keeps you from misplacing the cap. Also, the connector right here, you can actually twist that, and that can slide right out also. Then to put it back in, just line it up, twist that into place and then go ahead and put the cap right back on. This part comes with everything shown here. It includes the inlet itself.
It includes three of the insulation screws for installing this, and some putty tape for the installation. Again, the color on this is white. I'll give you a few dimensions. Overall diameter edge to edge is going to be right at 4 1/2 inches, and the cut out diameter, the inner part is going to be right at 3 1/2 inches. That should do it for the review of the Valterra Gravity Fill Water Inlet for RVs, white in color.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
Customer Reviews
Valterra RV Gravity Fill Water Inlet - A01-2003VP
Average Customer Rating: 4.8 out of 5 stars (52 Customer Reviews)
Replace your gravity fill fresh-water inlet with this flush mounted model. Barbed connecter fits 1-1/8" and 1-1/4" hose. Built in 1/2" vent lets air in and out of your tank for smooth flow.by: David 04/11/2024
Just like the original but now new.
by: Jeffery 06/09/2023
This is a perfect fit. The screw holes line up and the small air relief hole has a screen in it
by: John 01/09/2024
Excellent quality, perfect fit
by: Chris09/25/2023
When I installed it worked just fine. We have since traded the camper in on a new one.
by: Jessica07/23/2020
Easy installation, everything I needed was in the package.
by: Michael 06/25/2023
Easy install to give our ‘97 Coleman pop up a fresher cleaner look than our old one.
by: Donald 01/25/2021
The inlet was exactly the same as the OEM version that was replaced. One suggestion, there should be a screen over the breather hole as this is often filled by mud-daubers. I used a small piece of screen installed from the outside to prevent that.
by: Jeff09/06/2018
Worked great, exact replacement for my truck camper.
by: David M.10/14/2016
Everything arrived just as I ordered, on time, packaging was good. Very professional. Thanks Etrailer! I will be ordering from you again.
by: David 10/02/2022
Perfect fit as usual. So far your team is 100% on functionality and fit. Thank you
by: Amanda H05/17/2017
Fit perfectly and easy to change out from old one on pop up camper. Thanks etrailer!
by: Paul 08/15/2018
Perfect replacement .
by: Wes 10/01/2022
Easy to install. Nice to include the bu tyl.
by: JP07/05/2021
Exact replacement and a perfect fit.
by: Bob B12/17/2016
Quality Parts!
by: Dennis03/23/2021
Bought to reduce the introduction of something other into my tanks. Easy install. They can be painted to match when scuffed and prepped. They worked as anticipated.
by: Robert04/28/2021
Great products at a fair price. Excellent customer service. One item was back ordered, they kept me up to date on projected ship date and suggested other projects that were in stock.
by: Alisha05/11/2020
Products are of excellent quality. I can't wait to get them on my camper and start getting it looking close to new again.
by: Shane09/11/2018
Exactly what was described. Came with everything needed to install and reasonably priced.
by: John01/25/2018
Shipping was fast, products were just as advertised. Completely satisfied
by: Mike P.11/08/2016
Perfect fit easy to install......
by: Mark09/08/2019
Got exactly what I needed... good servi ce.
by: hiney08/21/2017
Product looks and works great. Wish it had just a little more sealant with it.
by: Jeremy07/17/2023
by: Carri05/22/2021
Good service and product is good.
25
52
Show More Reviews
See what our Experts say about this Valterra RV Water Inlets
- Recommendations For Replacing RV Water System Components I drew up a little diagram of how RV water systems are typically designed and attached it below to make it easier for you to see each component. I believe what you're referring to is simply just the fresh water tank drain, which you could use part # CAM22243 to tie into your tank and allow it to drain. The Anti-Siphon valve # A01-0141VP you were looking at simply connects to a Valterra Hydroflush # F02-4100 for you to hook up a garden hose and clean out your black tank. For the fresh...
view full answer...
- Are Any Additional Parts Needed for Installing the Valterra Water Inlet for RVs # A01-2003VPIf you already have the rest of your plumbing installed then you actually don't need anything else. The Valterra Water Inlet for RVs # A01-2003VP actually comes with the putty and screws needed for the installation.
view full answer... - Replacement Cap Needed for the Valterra Water Inlet # A01-2003VPYes, the replacement cap for the Valterra Water Inlet # A01-2003VP is listed as part # A0120SVP on our site.
view full answer... - Recommended RV Water Inlets For A 2005 Exiss Horse TrailerHey Lagina, If you're just looking for a water inlet then we have single (city water or potable water) or dual inlet options available. For a gravity fill water tank inlet you can use # A01-2003VP (white) or # A01-2003BKVP (black). We also offer lockable versions so others can't mess with your water inlets # A01-2002VP (white) or # A01-2002BKVP (black). For city water inlets we offer the # A01-0170LFVP (white) and # A01-0169LFVP (black) with surface mount flanges. For recessed flanges...
view full answer... - Will the Vent on the Valterra Water Inlet Allow Water to EscapeIn most all situations this will not be an issue. There is the small chance that the vent on the Valterra Water Inlet for RVs part # A01-2003VP would allow water to seep out in the event of an extreme bouncing situation or at extreme angles with an off road trailer. By design the tube connecting from the vent to the tank is of pretty good length so the water would have to travel a good distance. Also in most cases they will have looped the tube to help prevent any water loss.
view full answer... - Troubleshooting Water Intrusion Between Gravity Fill Mount and Inner FittingThe Valterra Water Inlet for RVs - White - Gravity Fill # A01-2003VP comes with a putty tape to ensure you don't have water intrusion at the mounting holes and flange. It sounds like you are having issue with the inner bayonetted fitting. The manufacturer does not mention any sealing between these parts, but I can see how that could be an issue. I'd use the silicone gasket maker # LT37467 to secure that if it were me. Then you still have the ability to remove that inner unit and reseal...
view full answer... - Dimensions on Valterra Water Inlet for RVs # A01-2003VPI went out to the warehouse to look at the Valterra Water Inlet for RVs # A01-2003VP referenced in your question to take a couple measurements. The outside diameter of the bottom of the barbed connector is right around 1-1/8 inches. The top portion of the connector, where the cap screws onto, is 1-7/16 inches I have attached an image that shows these dimensions. If you are needing a different measurement, please let me know and I will be happy to find the correct information for you.
view full answer...
- Size Hose that Fits Over Vaterra Water Inlet for RVs # A01-2003VPThe fitting on the Vaterra Water Inlet for RVs # A01-2003VP that you referenced that is designed for a hose to slip over has an outer diameter of 1-1/8 inches.
view full answer...
Do you have a question about this RV Water Inlet?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Amy B
Updated by:
Cody B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert B.
12/17/2017
Works great......had it for a while before installation as we were waiting for a new water tank.