MORryde RV Generator Slide Out Tray - 22-3/4" x 16-1/2" - 100 Percent Extension - 250 lbs
(175 reviews)
Price: $197.40
In Stock
MORryde RV Generator Slide Out Tray - 22-3/4" x 16-1/2" - 100 Percent Extension - 250 lbs
Item # MR49RR
Retail:$238.99
Our Price: $197.40
You Save: $41.59
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (175)
- Q & A (0)
- Photos
MORryde RV Cargo Slides - MR49RR
- 22-3/4 Inch Long
- 16-1/4 Inch Wide
- MORryde
- 100 Percent Extension
- 1 Way
- Generators
- 250 lbs
- Preassembled Tray
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
- Utility tray slides out for easy access to the generator in your RV's storage cargo compartment
- Grab your generator or add gas to it without crawling into a cluttered or cramped compartment
- Works with most common RV generators
- Safety latch locks the tray in the stowed position to prevent it from sliding open while traveling
- 1 Black knob is pulled up to slide the tray out
- 2 Adjustable straps tighten over your generator to keep it firmly in place on the tray
- Durable steel construction with black powder coat finish
- Bolt-on installation in your storage compartment
- Tray is preassembled
- Hardware not included
- Made in the USA
Specs:
- Fits: RV cargo compartments at least 22-3/4" deep
- Weight capacity: 250 lbs
- Tray extension: 100 percent
- Overal length including handle latch: 22-3/4" long
- Overall height including top of latch: 5-1/8"
- Overall width: 16-1/2"
- Internal dimensions: 21" long x 14" wide x 2-3/4" tall
- 1-Year limited warranty
Note: Do not run your generator while the tray is inside your cargo compartment.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knob up and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latch locks the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
Bolt-On Installation
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
SP60-042 MORryde RV Utility Tray - 250 lbs
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Defective
Customer Reviews
MORryde RV Generator Slide Out Tray - 22-3/4" x 16-1/2" - 100 Percent Extension - 250 lbs - MR49RR
Average Customer Rating: 4.6 out of 5 stars (175 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.by: Gregory04/06/2024
Overall this does what it should do. But one thing to be aware of is that the side sliding brackets are attached with rivets that project into the tray 3/8" on each side as well as with the front locking mechanism decreasing the tray's actual interior dimensions. My Dometic ref/cooler just fits but I may still drill out the rivets and replace them with machine bolts and nuts to gain more clearance.
by: James07/20/2023
Very well-built product.
Extremely sturdy and rolls extra smooth.
Work perfectly for the installation of a 12 V / 110 V beverage cooler.
I added a piece of half-inch plywood to the top to extend the length for the cooler base.
Made the storage compartment 100% more usable!
by: Richard 10/23/2023
I got 2 of these for my generators and they look like they are gonna work great. I haven’t actually used the generators yet but, no more lifting them in and out. They are both connected together and cabled together and locked for security. So glad I found these
by: Michael Hosford09/18/2023
I placed an order later to find out the item was on back order. They suggested a replacement and I accepted. The replacement was not the correct size. I returned the item with their printed tag. They charged me $62 to return the item. They would not listen to reason. I will not do business with them again...
by: Roy10/28/2021
Generator tray arrived sooner than expected. Was packed extremely well without any damage. Have not installed the tray yet but looking at it appears to be a solid and well built assembly.
by: Mark 08/25/2021
Fast delivery. Could do a better job on taping up the box. It arrived almost open. The shelf itself is very solid and well made. I am using it for a different purpose than a generator. But it will be perfect for what I need.
by: Brent05/15/2023
by: Shawn 01/29/2024
by: Charles 01/13/2024
by: Brian 08/31/2023
by: John 10/02/2022
by: Scott 02/10/2024
by: Nathan05/24/2023
by: Caroline 01/24/2022
by: Christopher03/25/2024
I am unsure if I received a faulty product. I am using a 3500 Predator generator for my detailing setup, and the pull out does not stay pulled out unless the ground is slanted. I would of thought I locked in place. Also this set up does not bring the screws or proper hardware.
by: Michael04/25/2023
I use this tray as a battery tray for two Trojan 12 volt golf cart batteries for my RV. The batteries are 85 lbs each and the slide makes them accessable for maintenance. The previous owner, or some other jerk removed the original trays, and exact replacements are no longer available.
by: Rezilient03/24/2024
Great generator slider, easy to install and holds the weight of my 100lbs predator generator no problem
by: Donna 02/24/2023
Packaging didn’t survive the trip, but the item was fine. Fast shipping. Nice quality slide out tray, perfect for my application!
by: Chris 04/21/2024
Etrailer was great as usual with quick and fast shipping. The item works mostly as expected. The locking mechanism is not very reassuring. The included straps are way too short. I don’t think just for my generator, I’m not sure they would fit any model honestly.
by: Alvin10/10/2023
This generator slide out was exactly what I was looking for. My wife had bought a new generator for my race car trailer so now was the time to upgrade. The MORryde generator slide out is very heavy and seems very well built. Slides out and back in easily. The only thing that I would change is the length of straps that came with it. But that is really a non issue as I wasn’t buying this for the straps. It does not come with hardware to bolt it down but this is stated in the description. Each installation is different so again this is not an issue. Very pleased with the product and would recommend this to anyone.
by: Shawn11/21/2023
This is the perfect solution to my issue with having to load and unload my generator by myself. I can now safely run my generator with the slide pulled all the way out. The quality is excellent and very well put together.
by: Crystal 02/11/2023
Great quality. Fast ship. Easy to install. Used it in GrandDesign fifth wheel to hold Blackstone grill.
by: Chris p04/26/2023
Great product very easy to install. I do mobile reconditioning on cars and needed to get the generator out of the trailer without breaking my back moving in and out everyday.
by: Michael 03/03/2023
The slide out seems very sturdy and glides smoothly. I feel much better about the purchase. Can't wait to install it.
by: Tom12/06/2023
I bought these MORryde full extension slide-out trays to replace a pair of battery trays in my motorcoach that were 20 years old and in need of refurbishment. The trays are in-kind replacements of the existing trays, and the best available in the industry. They work as designed, and are well-made. The trays get five stars, and the vendor gets five stars as well. I would give etrailer a higher rating if it existed.
A week prior I had ordered these trays from another on-line vendor. After a week with no scheduled delivery date and making numerous inquiries by email, text, and phone with no response, I finally was forced to cancel the order. I then ordered the trays from etrailer, and received an immediate order acknowledgment with the shipping schedule and tracking number. They were shipped that day, and the items were delivered several days later, a day earlier than scheduled. A good experience all the way around. Thank you!
25
174
Show More Reviews
See what our Experts say about this MORryde RV Cargo Slides
- Recommended Slide Out Tray for a 16" Wide Opening
I see tThe closest we have to what you're looking for is the MORryde RV Generator Slide Out Tray # MR49RR. This slide out tray measures 16-1/2" wide, 5-1/8" tall, and 22-3/4" long, and has internal measurements of 21" long x 14" wide x 2-3/4" tall. This is going to be the closest option we have to your specs so you'd may need to do some on the fly customization.
view full answer... - Recommended Sliding Cargo Tray For A 25" Deep x 34" Wide Space If you're saying that the 25" deep x 34" wide measurement is the size of the space available then the largest option that we currently offer to fit this space is the MORryde RV Generator Slide Out Tray # MR49RR, which is 22-3/4" deep x 16-1/2" wide. It has a 250lb capacity and 100% extension rate. There's a lift kit # MR34VR available as well to raise the height and clear your 1.5" rise for the door.
view full answer... - Is Powder Coat of MORryde RV Generaor Slide Out Tray MR49RR Thermoplastic or ThermosetThe powdercoat of the MORryde sliding tray part # MR49RR is the thermoplastic type.
view full answer... - Does RV Cabinet Drawer Slide Socket Set Have a Weight CapacityThe RV Cabinet Drawer Slide Socket Set - C-Shape - 2-3/8" Deep # 37270735 don't have a weight rating as they are meant to be used for standard cabinet drawer applications - so nothing heavy duty. Usually when someone is asking about a weight capacity it's because they are needing to carry something fairly heavy. If this is you then you might consider installing something like the MORryde RV Generator Slide Out Tray part # MR49RR for a 22-3/4" x 16-1/4" tray or part # MR69RR for a 15-3/4"...
view full answer... - Tray Floor Height of MORryde Generator Tray # MR49RRFrom the floor where the MORryde sliding tray # MR49RR would mount to the bottom of the tray where your generator would sit measures 1-3/4 inches.
view full answer... - Can MORyde Refrigerator Tray For RV Cargo Compartment Be Used To Hold A Forge?The MORryde Refrigerator Tray for RV Cargo Compartment - Side Pull - 26-1/2" x 18" # MR39RR is constructed of steel, but it does have a plastic handle. This may work for you, but keep in mind it technically was not designed to be used with hot devices and has not been tested in that aspect. I recommend looking into one of the trays that are designed to be used with hot devices like generators. For this, the MORryde Generator Tray - 22-3/4" x 16-1/4" # MR49RR could be what you are looking...
view full answer... - Is the MORryde RV Generator Slide Out Tray MR49RR the Same as MORryde SP60-042Yes, the MORryde RV Generator Slide Out Tray # MR49RR is MORryde part number SP60-042.
view full answer... - How Many Golf Cart Batteries With the MORryde RV Generator Slide Out Tray HoldThe internal tray dimensions of the 22-3/4" x 16-1/2" MORryde RV Generator Slide Out Tray # MR49RR are 21" long x 14" wide x 2-3/4" tall which according to my research means it will accommodate up to 2 golf cart batteries. The MORryde RV Fridge Tray # MR39RR is the next step up with internal dimensions being 24-13/16" long x 14" wide x 2-1/2" tall which should be able to handle 3 batteries (provided they don't exceed the 225 lb weight limit), but it doesn't look like any or our trays will...
view full answer...
Do you have a question about this RV Cargo Slide?
Info for this part was:
Installed by:
Andrew K
Installed by:
Michael B
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Mary K
Edited by:
Amanda M
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
5/19/2023
We would love to know what you are thinking. If you have any comments, please let me know.