Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 14-1/2" long pintle hook fits inside your 2" x 2" trailer hitch receiver so you can quickly and easily equip your vehicle for pintle-style towing. 10,000-lb Capacity. Powder coated forged steel resists rust.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the Curt Pintle Hook for 2 inch hitches. Now, this pintle hook lets you hook up your trailer to your towed vehicle. It sides into the receiver tube of your hitch and provides the attachment point for the lunette ring coupler. It's made from a strong forged steel construction, has a nice corrosion-resistant, high-gloss black patent coat finish. Solid strength design. I do want to point out that it has this tethered safety pin, so in order to open up the unit, you gotta take this clip, take it off, remove the pin, it's tethered on there so you don't misplace that or lose that.
Take this T-handle, flip it up, that's how you're gonna roll back the top portion. This is gonna allow you to connect to your lunette ring. And then to secure it, you bring this back down, take the pin, place it through, secure it with the clip on the other side, that's all there is to it.Now you will need a hitch pinning clip or a hitch lock to secure this inside the receiver tube of your hitch. Those items are sold separately and available at etrailer.com. This unit will accept the standard 5/8 inch diameter pin.
Again, it is designed for a 2 inch by 2 inch trailer hitch receiver, it'll fit a lunette ring coupler with a minimum inner diameter of 2.5 inches. Gross towing weight capacity for this unit is 10 000 pounds. A few measurements I want to go over with you real quick. I did take a measurement of the overall length, so I measured edge to edge. Very front to very back, we get a measurement of about 14.5 inches.
And then from the center of the pintle hook area to the center of the hitch pinhole, that gives us a measurement of around 9.5 inches. That's gonna do it for today's look at the Curt Pintle Hook, for 2 inch hitches.
Average Customer Rating: 4.9 out of 5 stars (408 Customer Reviews)
This 14-1/2" long pintle hook fits inside your 2" x 2" trailer hitch receiver so you can quickly and easily equip your vehicle for pintle-style towing. 10,000-lb Capacity. Powder coated forged steel resists rust.I purchased a new Curt Pintle Hook Hitch to tow a small material trailer to construction sites. I am pleased with the hitch and it's ease of operation.
Well made, very s3cure.
Great selection of equipment. Quick shipping and good customer service. Will definitely be a repeat customer
Can not be beaten for the price. Have never found a load too great for it. My truck is the only limit!
Stret
3/26/2020
Absolutely!!
Brittany was great. I needed a product overnight. she
handle it with ease
Thanks
Great Product, very strong and durable, holding up well after a YR.
Excellent quality. No problems after one year.
Works as advertised! Great job!
Very nice quality and well packed with fast shipping.
Received product in timely manner. I would order from them again.
It was good time and not real expensive.
I received the products I purchased in a very timely fashion.
Very robust
surprisingly easy to mount, very strong. Very minor gripe about the locking pin... I use the pintle hook on a tug, so I'm probably going to be replacing it with a large cotter pin on the wire, but for infrequent use the current locking mechanism is perfectly fine and is well secured.
Great hitch for hauling my tractor. The team at etrailer is awesome. Keep up the great work - I love all the pics and videos.
It's solid and straightforward. Haven't had 30K# behind it (yet) but towed an empty 25K# GVWR equipment trailer from Indiana to Mississippi without any trouble at all.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination.
Thanks
Working great I use the fixed straight hitch when I need a little more hitch height or the adjustable hitch depending on which application works better.
Fits to loose in the receiver. Made in China.
Do you have a question about this Pintle Hitch?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary
11/2/2022
Works fine, I ve been using it as an attach point on the rear of a off road truck.