Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars
(150 reviews)
Price: $34.95
In Stock
Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars
Item # THXADAPT12
Retail:$59.09
Our Price: $34.95
You Save: 41%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (150)
- Q & A (0)
- Videos (1)
- Photos
Thule Accessories and Parts - THXADAPT12
- Roof Rack
- Adapters
- Watersports
- Thule
This adapter kit will allow you to mount the Thule Portage and the SUP Shuttle directly in the channels of your AeroBlade, AeroBlade Edge, or WingBar Evo load bars.
Features:
- Adapter kit lets you mount the Thule Portage (TH819) and the SUP Shuttle (TH811XT) directly in the channels of your Thule AeroBlade, AeroBlade Edge, or WingBar Evo crossbars
- Replaces existing hardware
- Includes T-bolts and nuts
XADAPT12 Thule Watersports Adapter Kit
Installation Details
Video of Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Thule Xadapt12 Watersports Adapter Review
Today we're going to be taking a look at the Thule Xadapt 12 water sports adapter for AeroBlade and AeroBlade edge bars, part number THXADAPT12. This adapter kit enables you to mount either your Thule board shuttle or the Thule Portage to your AeroBlade and AeroBlade edge roof rack load bars. It does so by replacing the original hardware with the T bolts and sliding them into these slots here and then tightening them down. This comes with the tools necessary to tight this down to your vehicle as well. Now that we've gone over some of the features lets go ahead and show you how these install. We're going to install them on our Thule board shuttle. When you open up the package for the adapter kits, you're going to have four T bolts plus these four attachment points, which are going to go onto our board shuttle and fit into the T slot of your Aero bars.
Let's go ahead and show you how that's done. We'll first remove all the attachment points on our board shuttle by unscrewing these turn knows here. Removing those completely. Then we'll insert this top piece here. Then attach our T bolt underneath. Just loosely for now.
We'll repeat this for our other attachment points. With our AeroBlade load bars we'll go ahead and open up the end and going to remove the entire strip. Normally you would take it out and cut it in place to go around your actual accessories but for today's purposes, we'll just take the whole thing out. Then we'll take our T bolt here, line it up, slide them into place. Now once you have them where you want them, we'll take our included Allen tool here. Just go ahead and start tightening down the bolt.
We'll repeat this on the other side. Now we'll go ahead and repeat this for our rear AeroBlade bar. With our accessory installed in the T track, now we're ready to load up our gear and hit the road. There you have it for the Thule Xadapt 12 water sports adapter for AeroBlade and AeroBlade edge bars, part number THXADAPT12.
Customer Reviews
Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars - THXADAPT12
Average Customer Rating: 4.8 out of 5 stars (150 Customer Reviews)
This adapter kit will allow you to mount the Thule Portage and the SUP Shuttle directly in the channels of your AeroBlade, AeroBlade Edge, or WingBar Evo load bars.by: Donald05/30/2019
I used this adapter kit to mount Thule SUP Taxi to my Thule TracRac - TracOne racks. The original SUP Taxi mount-straps were not long to fit these racks, even though the buyers guide indicates they are. This adapter kit made it possible to secure the SUP taxi right to the bar. So glad you had this available! Now I'm ready for our trip to the FL Keys!
by: K. 11/30/2016
Very happy to have found eTrailer. Fantasic site. Great customer service answers questions quickly and is very helpful and hands on. Havent tried product yet but looks as described and of good quality for an unbeatable and reasonable price. Wish there were more places like this. Thanks!
by: JoeF05/12/2015
Always able to get hard to find niche rack parts and hitch accessories.
Orders are received fast and accurately. etrailer is my go to source for rack and hitch accessories.
by: Chris11/16/2018
Needed this to adapt a Rocky Mounts Driveshaft rack from my old truck to the new one. These fit perfectly in the channel on the 2019 Ram's 'sport utility bar', which is a Thule 393. A little more bolt length than I needed but the extra is not hurting anything...
by: Michael09/05/2021
As described and worked for my application. etrailer is a great place to find exactly what you are looking for, even when you are looking outside the box.
by: Chip08/15/2015
Parts that make Thule racks even better !!!!
by: Eric 07/22/2020
high quality product. nice replacement parts for the echelon bike tray.
by: Robert06/10/2018
I have not used the product yet, but am certain it will be great. Thule wants a lot more for it and they take longer to ship for sure.
by: Sarah 03/14/2024
by: Richard 02/10/2024
by: Istvan05/15/2021
no problem at all
by: WT06/17/2019
Product was as shown
by: Vince01/14/2019
Fast shipping. Worked as expected.
by: Mike03/10/2024
by: Emry L.01/12/2016
Fast shipping.
Thanks
by: Shawn 06/04/2023
by: Kenneth 09/03/2022
by: Brad 08/18/2022
by: Jack 03/03/2021
by: Bruce 06/25/2021
by: Noel 04/11/2024
This part allowed me to adapt my previous Thule accessories to work on VW Branded Roof Bars.
by: Chris S Audi Fan09/28/2020
Adapter works perfectly on 2020 Audi Q5 (VW) But didn’t need all the xtra hardware for Thule Big Mouth bike rack. (Ca 2003) . 3 of the short bolts per unit did the trick and of course the rubber inlays to prevent scratching and rattling are perfect.
by: Brian 04/23/2024
Perfect length for the new Thuly thicker cross bars.
by: Brandon05/26/2016
I used the XADAPT2 kit to convert my Thule Bigmouth bike carriers to fit the OEM Volkswagen cross bars on my 2016 Jetta sedan. The bike carriers originally had clamps to fit the Thule square cross bars, and this kit allowed me to convert the carriers to fit in the T-slots of the VW cross bars. The kit was originally designed for older VWs, but the T-slot dimensions have not changed for the modern VW cross bars. I would venture to guess that the kit should work for the OEM cross bars of any modern VW rather than just the Jetta, since the VW bike carriers are not model specific. A great quality kit, and perfect for my application!
25
150
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Video Guide For Installing Thule Xadapt12 on SUP TaxiOn this page I attached a review video link that shows how the Xadapt12 part # THXADAPT12 installs on a Thule SUP taxi for you to check out. It's hard to say exactly where it will be depending on the size of your screen but look for the heading FEATURED HELP INFORMATION and the title Thule Xadapt12 Watersports Adapter Review.
view full answer... - Dimensions of T-Bolts in the Thule XADAPT12 KitThe threaded section of the Thule Xadapt12 Watersports Adapter # THXADAPT12 measures 7/8" while the square head is 3/4" x 3/4" as you can see in the attached photo.
view full answer...
- What are Thule Xadapt12 Bolts Made OfTensile strength is not available in regards to this adapter because it is only rated to be used on certain Thule accessories and should not be used for other purposes. Due to this there would not be a reason for Thule to have information regarding tensile strength.
view full answer... - Adapter to Fit Thule Sup Taxi to Top Channel of Thule TracRac Ladder RackDo you know which rack specifically you have? With that info I can check and see if we can get what you need.
view full answer... - What T-bolts Do I Need For My Thule AwningIf you do not have any t-bolts, you will need three of the Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars, part # THXADAPT12. You will only need the t-bolts.
view full answer... - Thule Xadapt 12 Watersports Adapter T-Bolt Square Head PitchThe Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars # THXADAPT12 T-Bolt has an overall length of 1 inch and the threaded portion is .85 inches with an M6 x 22mm pitch. I measured this with a digital caliper in our warehouse for you but have also given you more rough dimensions in a photo to assist.
view full answer...
- M6 x 22mm T-bolts for Thule THXadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge BarsI spoke to my contact at Thule and they do have the M6 x 22mm T-bolts that come in the # THXADAPT12 as separate items. The part number is # 853208914. This is sold as a single piece.
view full answer... - How To Use Thule Portage Canoe Carrier On Rhino-Rack Vortex Aero CrossbarsYes, the Thule Portage Canoe Carrier part # TH819 will work with the Rhino-Rack Vortex Aero Crossbars. The wraparound clamps that come with would fit just fine on these crossbars but if you wanted to mount them in the channels you would indeed need the Thule Xadapt12 Watersports Adapter part # THXADAPT12.
view full answer... - Recommended Carrier for a 2010 Toyota RAV4 Carrying a Lifetime Kodiak Canoe The best option that we have for you to carry your Lifetime Kodiak Canoe on your 2010 Toyota RAV4 is the Thule Portage Canoe Carrier w/ Tie-Downs - Gunwale Brackets # TH819. This is a side-loading option to you might need to get a little help lifting the canoe up, but once it is installed properly it is one of the better canoe carriers that we have to offer! The kit includes everything that you will need to secure your canoe and since it has a 150-lb capacity it will have no problem carrying...
view full answer...
- Are Thule Portage Gunwale Brackets Compatible with Yakima Crossbars?The Thule Portage Canoe Carrier Gunwale Brackets, # TH819, are universal-mount, meaning they will fit Yakima crossbars. The only thing to keep in mind with these brackets is that they will need an adapter, # THXADAPT12, should you want to mount them on crossbars with top channels in the future.
view full answer... - Adapter Recommendation for Thule SUP Taxi To Install on TracRac Crossbar ChannelsYes, the channels for the Thule crossbars are 3/4 inch wide like the TracRac's so the # THXADAPT12 which fits the SUP Taxi # TH810001 and Thule channels will also fit TracRac ladder rack channels as well. This is a pretty clever solution by the way!
view full answer... - T-Bolt Kit To Adapt Thule SUP Taxi To The T-Slot Instead Of Using Speed LinkTo adapt the Thule Sup Taxi # TH810001 replaced the 810 model but installs in the same way. To use the T-slots on Thule crossbars, you will use the Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars # THXADAPT12. This kit will work with many Rhino-Rack and Yakima crossbars as well. I've also attached a photo of the measurements of this other t-bolts to help.
view full answer...
- Does Rubber Cover of Thule Wingbar Top Channel Require Cutting or Trimming With AccessoriesOn the Wingbar Evo crossbars like the part # TH711420 the top channel rubber strips basically push out of the way when installing accessories which means you don't have to remove any portion of the strip. This is true for the Thule Xadapt12 part # THXADAPT12 as well.
view full answer... - How to Mount Thule Pull Top 726 Ski Carrier to Aero Style CrossbarsI have a solution for you to use your carrier on your Thule Aeroblade Edge bars, but the old Thule Pull Top 726 does not have a way to mount in crossbar channels. For that reason you'll need to use the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks # TH7520970001, which will give you clamp on mounts for your Thule Pull Top 726.
view full answer... - Adapter Kit for Thule Flat Top Ski CarrierInstead of part # THXADAPT12, you'll need part # Xadapt2, which will add channel-mount parts to your carriers and allow it to flush mount on your Thule Aero Bars.
view full answer... - Can Accessories Be Installed In Bottom Channels On Yakima HD CrossbarsIn regards to Yakima HD Crossbars like part # Y01157, you can secure accessories in both the top and bottom channels. These channels are pretty much a standard size so you can use track mounted accessories from pretty much any brand such as Thule, Rhino-Rack, Rola, Etc. The T-Bolt Kit part # THXADAPT12 would work for custom applications. That said, there isn't an exact size nut that must be used inside the channels.
view full answer... - Size of T-Bolt in Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge # THXADAPT12The Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars, # THXADAPT12, contains 4 - M6 x 22mm T-bolts and nuts. The Replacement Square Head Bolt for Thule Flat Top Ski and Snowboard Carrier, # 853208904, is a M6 x 13mm T-bolt so this is not the same bolt that is included with part # THXADAPT12.
view full answer... - What is the Square Head Dimensions of Thule Square Head T-boltsThanks for the awesome detail in your question! I pulled each part from our warehouse to provide you the measurements requested. The Thule Xadapt12 kit # THXADAPT12 T-bolt head size is 3/4 inches, 7/8 inch long threaded portion and .23 inch diameter. The replacement M8 T-bolt # 853-5715 T-bolt head size is 3/4 inches, 1-inch long threaded portion and .30 inch diameter. The replacement T-bolt # 853208904 head size is 3/4 inches, 5/8 inch long threaded portion and .23 inch diameter. I...
view full answer...
- Does Thule Portage Canoe Carrier Fit Rhino Rack Aero CrossbarsYes the Thule Portage # TH819 can fit the Rhino Rack roof rack part # RRRVP37 that you referenced. Or if you preferred the carrier to attach into the top channel of the crossbars you'd just need the part # THXADAPT12.
view full answer... - Channel Mount Canoe Carrier Solution for Malone Roof Rack that Fits 2021 Subaru ForesterYou can use the Thule Gunwale Canoe Carrier part # TH819 with the adapter part # THXADAPT12 and the carrier would fit in the channels on top of your Malone Aero bars part # MPG216 like you are wanting. This would give your boats the side to side stabilization you are wanting.
view full answer... - Replacement T-Slot Bolts for Adding Accessories?We can get what you need depending on exactly what you're doing the Thule Xadapt12 part # THXADAPT12 could work. It uses barrel nuts that thread down on the bolts for security. You can use the Replacement M8 T-Bolt part # 853-0782 this will allow you to use any type of M8 nut you would want to secure you gear. Any extra length can be cut off. Also, the Truck Rack T-Slot Fit Kit part # MPG8287 gives you an option to run the bolts down into nuts in the t-slot itself.
view full answer... - Will the Thule Xadapt 12 Work on a Front Runner Rack?I have an answer for you. Unfortunately, Thule does not test the Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars # THXADAPT12 on competitor racks/crossbars. With that being said, the Xadapt 12 is only confirmed to use with Thule Portage # TH819 and the SUP Shuttle # TH811XT on the channels of the Thule AeroBlade, AeroBlade Edge, or WingBar Evo crossbars. However, if your Front Runner rack has top channels, there is a possibility that the Xadapt12...
view full answer...
- Will Malone BigFoot Pro Canoe Roof Rack Fit 3-5/8" Wide Rivian CrossbarsThe 3-1/2" width measurement is going to be the limit for the # MPG112MD and anything else like it. With an 1/8" difference you might just be able to force it but those factory bars look nice so I wouldn't risk scratching them up for something that isn't even guaranteed to work. It looks like those crossbars have T-slots in the top but Malone discontinued their T-slot kit for this product. Assuming your crossbars do have top channels you could use the Thule Portage Canoe Carrier # TH819...
view full answer... - How to Install Thule Portage Canoe Carrier on Thule Xsporter # TH500XT Ladder RackYes you can use the Xadapt part # THXADAPT12 with the Thule Portage Canoe Carrier part # TH819 so that it can install in the top channels of a Xsporter part # TH500XT.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Updated by:
Lisa S
Updated by:
Matthew S
Updated by:
Alex H
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
6/11/2019
Works as advertised. Holds my canoe securely in place.