Round LED Strobe Light - Recessed or Surface Mount - 16 Flash Patterns - White LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378892401 Review

Speaker 1: Today we're taking a look at a three LED strobe light. This clear LED strobe light features three high intensity LEDs and is designed to be a surface mount or a recess mount design or installation. It can also be installed inside a vehicle's headlights or taillight assembly if there's room. The LED strobe light is SAE-J595 class one rated and CA13 certified. This is a one-inch round strobe light that features 12 adjustable flash patterns and includes a black bezel, which is located right here.Overall it's a nice design. It's easy to use, easy to install.

LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient. With LEDs you don't have to worry about replacing bulbs. You don't have to worry about brittle filaments. It's a clear lens with clear LEDs and it features a three wire design.

So your black wire is your ground wire, red is for your main power, yellow is for synchronization and changing the flash pattern. When it comes to the dimensions of the unit, starting with the overall diameter of just the light, it's about an inch and a half. If you do that with the bezel, it increases to about 1 7/8 inches. Overall depth, that's from front to back, that gives a measurement of about 11/16 of an inch deep. And then the mount holes on the unit are separated on center by an inch and a quarter.

So you do have a lot of options when it comes to mounting. It's a really nice design.You have, just real quick, you got some mounting hardware. You have a bezel that adds a clean finished look to the unit. It just goes over this area here. And then the light comes through, snaps into place.

You have a foam mounting gasket and then you also have another mounting gasket that has adhesive backing on it for a peel and stick application or installation.We're gonna go ahead and hook it up to power. That way you can see what it looks like with some power running to it, and then we'll also turn off our overhead lights so you can see it in a lower light setting. It's a nice, bright design. Now to change the flash pattern, we just gotta take the yellow wire and apply it to our power wire, and then every time we do that it'll change the flash pattern. Now I do wanna point out that it does have a solid design where all the LEDs are on. And again, it has 12 flash patterns to choose from. So now as I talk I'll just cycle through so you can get a good look at all of them.It's a three diode system, so the multi-diode design really helps optimize the overall light output. It sends out a really nice, clear, consistent signal. Very bright unit for as small and compact as it is. Wattage is 5.6 watts. Voltage, 12 to 24 volts. Wattage, 0.47 . or sorry, amperage is 0.47 amps at 12 volts. So I'm just gonna continue cycling through until we get back to the solid flash. That way we'll know we cycled through all of them. A lot of different patterns to choose from.That's gonna do it for today's look at the three LED strobe light.