Low Profile LED Vertical Strobe Light - Surface Mount - 19 Flash Patterns - Amber and White LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378891912 Review

Speaker 1: Today, we're taking a look at a 6-LED Thin Strobe Light.This thin mount, clear LED strobe light is designed with a thin 3/8" profile to fit into tight areas.The 12-24v strobe light has six LEDs and features 19 flash patterns with alternating and synchronized features.The light is rated IP67 for water and dust resistance. It has a SAE J595 Class 1 rating. This must be mounted vertically to achieve Class 1 rating.It's an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're much more efficient. With LEDs, you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.The unit features a really nice, black aluminum housing.

Has a clear lens with amber and clear LEDs, so three of these LEDs are amber, the other three are clear.It's a surface mount installation. It comes with a foam mounting gasket and installation hardware. It also comes with detailed installation instructions that go over all 19 flash patterns that the unit has to offer.It's a three wire design, so your black wire is your ground wire, red is for power, yellow is for synchronizing and changing the flash pattern.When it comes to the overall measurement, going this direction edge to edge, it's four and a half inches. Side to side, it's 1 1/8" and then again, the thickness is 3/8". Mount holes are separated on center by 4".We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it and then we'll also turn off our overhead light, so you can see it in a lower light setting.Sends out a nice, bright, consistent signal.

Again, we have three LEDs that are amber, the other three are clear and then I'll take the yellow wire and momentarily or temporarily touch it to the power source and that will change our flash pattern.So again, we have 19 to choose from. All 19 are indicated and titled in the included instructions.We have a total of six LEDs. There are six diodes. So, the multi-diode design really helps optimize the overall light output.Voltage is 12-24v and the amperage is 1 amp at 12v.I'll just cycle through a few more here for you.It's a very bright design and it does have an All feature, which means all the LEDs are on.That's going to do it for today's look at the 6-LED Thin Strobe Light.