7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Our Price: $36.33
Confirmed to Fit
2002 Ford Excursion
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2359)
- Q & A (0)
- Photos
- Used (1)
2002 Ford Excursion - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Trailer Hitch Wiring
- 7 Round - Blade
- 4 Flat
- No Converter
- Hopkins
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Ford Excursion's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Ford Excursion End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2359 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: Warren 04/25/2023
2005 GMC Sierra
Fast shipping. Nice quality product
Warren
4/26/2024
Products still working great.
by: RT12/13/2023
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
by: Michael 04/30/2024
2021Ram2500
Plug and play item,worked great
by: D-RAIL02/04/2024
2001 Chevrolet Suburban
Really impressed with the Hopkins product overall. Seems very sturdy, and the install was very straightforward. Would certainly recommend this plug, and etrailer to anyone in need.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
25
2359
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- How to Wire up a Pollak 7- and 4-Pole Trailer Connector on a 2002 Chevy SilveradoI am glad you were able to get the wiring of your vehicle figured out. We apologize if the video confused you. Vehicles don't always have the same color wires. The best way to wire up trailer connectors is by function, using a circuit tester like our part # 3808 to test all of the wires to determine their function and wire the connector up accordingly. I attached an FAQ on trailer wiring that has diagrams for you to check out as well.
view full answer... - Adapting 7-Way Trailer Connector on 2012 Nissan Titan To 4-Pole Connector on TrailerYour Titan would've been factory equipped either with or without the 7-way trailer connector. If there's indeed a connector on the rear, it would be the 7-way. There's a few ways you can go about doing this. The easiest option would be to adapt the 7-way to work with a 4-pole by using a plug-in adapter like part # PK12716. You could also use the # C55515 that you referenced. You'd unplug the wiring harness from the rear of your 7-way, and plug the # C55515 inline with that connection....
view full answer... - 7-Way Trailer Connector With 4-Pole for 2000 Ford F250If your truck has the OEM 7-way, it should have a round connector that plugs directly into the back of it. You can unplug the connector at that point, and then plug it into the 7-way of your choice, like the # 74682 you referred to, or the # HM40975 which is being used as the OEM trailer connector on the new Ford trucks. The square connector you speak of is usually a little further down the line, on the frame rail.
view full answer... - Parts Recommendation to Tow a 7,500 lb Trailer with a 2000 Chevy C1500 TruckFirst let's start with a hitch, if you do not have a 10 inch deep drop bumper you would want the Curt Hitch part # C15325. If you do have a drop bumper you would want the Curt Hitch part # C15317. Now for wiring you will need to start with a 4-way like the Tow Ready Wiring Kit part # 118315. To convert this to a 7-way and install a brake controller you will need the Brake Controller Installation and 7-Way Install kit part # ETBC7. I attached an install video and installation instructions...
view full answer... - Troubleshooting Left Trailer Taillight that Doesn't Function when Running Lights are OnIt sounds like the ground is weak on the left side of the trailer lighting. I would be willing to bet that if you were to inspect and clean how the left side light assembly grounds it would start working like normal. When the taillights are on the maximum amount of amperage is being drawn from your vehicle and trailer so that is when a weak ground would start causing problems. The wiring of your Lexus might have more powerful circuits and are able to overcome the weaker ground. I attached...
view full answer... - Recommended Wiring Harness for 2017 Chevrolet Express Van with Tow PackageFor your 2017 Chevrolet Express Van with a 7-Wire socket already installed at the rear, you will just need the Hopkins 7- and 4-Pole Trailer Connector # HM40975. This will connect directly to the OEM wiring you mentioned to provide both a 7-way and 4-way connector for your trailer. I have attached a video demonstration on this connector for you to check out.
view full answer... - Replacement 7-Way Vehicle Socket for 2005 GMC SierraThe 7-way socket you referenced, Pollak # PK11893, connects to your vehicle with a round standard U.S. Car connector. This is an exact OEM replacement for the GMC Sierra. If you wish to have flexibility to connect to trailers that use a 4-pole flat connector you can instead consider one of the 4- and 7-way connectors shown on the link provided. These plug in to the truck in the same way but provide two connector options. Several include a length of wiring, such as Curt # HM40975, which...
view full answer... - 7-Way Recommendation to Allow a 7-way and 4-way to be Used SimultaneouslyYes, you could use the 4-way and the 6-way of this Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 simultaneously. Since the bar on your pickup will be LED and LEDs hardly draw any amperage it should not be a problem for you at all. In case you are looking for a trailer connector that already has a 7-way and a 4-way on it you would want a Trailer Connector like part # HM40975. This would replace your existing 7-way and give you a 7-way and a 4-way as an option. The # HM47570...
view full answer... - Replacement Trailer 4/7-Way Connector For the Factory Connector On a 2017 Chevy Silverado 1500Yes, the Curt # C42JR will fit in place of the factory Pollak # HM40975 trailer connector on your 2017 Chevrolet Silverado 1500.
view full answer... - Will 7- and 4-Pole Trailer Connector Socket HM40975 Fit a 1997 Ford F-150 Flareside w/Factory 7-WayOn the back of your factory 7-Way trailer connector on your 1997 Ford F-150 the wiring harness should plug into the back of it meaning it can be removed. If that is indeed the case with yours then you can install 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End Item # HM40975 in its place. I have linked a video that shows installation for you. I do not anticipate a problem because all of the replacement 7-Ways listed for your truck install in the same way.
view full answer...
- Replacement 7-Way Trailer Connector for a 2003 Chevy Silverado 2500HDI actually recommend that you use the Hopkins connector, # HM40975, because it comes with a 7-Way and a 4-Way and also comes with a bracket. The connection at the back is made to fit the factory harness on a 2003 Chevy Silverado that came with a factory 7-Way. I have included a link to a video that shows a typical installation for you. If you want to go with a regular 7-Way use # PK11893 and bracket # PK12711U.
view full answer... - Wiring 12-Volt Accessory Circuit to 7-Way Trailer Connector on 1997 Chevrolet 3500 Cab and ChassisI believe the remaining wire you're speaking of is actually light blue, and is meant to provide power for a third brake light installed on a camper shell. If you want to run a 12-volt accessory power circuit, you can run it from the positive battery terminal to the 7-way. Your truck MIGHT have a 12-volt accessory wire ran already...you'd just need to make the connections on each end. Look on the driver's side frame rail at the rear of the truck. You're looking for an orange wire. If you...
view full answer... - Should Stop Light Switch Wire On Trailer Brake Controller Have Ground Or Power?The red wire on the trailer brake controller that goes to the cold side of the stop light switch is a power wire, and should not be grounding. This wire gives 12 volts of power only when the brake pedal is switched, and is what tells the controller to send power to the electric brakes. On your 2008 Chevrolet Suburban this wire is the light blue/white wire. I recommend double checking that you hardwired the controller to the factory run wires under the dash correctly, as it sounds like...
view full answer... - Does Hopkins HM40975 Fit 2019 Nissan PathfinderYep, the 7- and 4-Pole Trailer Connector Socket # HM40975 does fit and will plug right into your 2019 Nissan Pathfinder.
view full answer... - Will the Pollak 7- and 4-Pole Connector Plug Directly Into Factory Gray Plug on 1999 Ford F-250The Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 does not come with any wiring, just the socket and a mounting bracket. If the wiring on your 1999 Ford F-250 Super Duty is shot back to the factory square gray plug then you will need to use some replacement wiring. If you use the Curt T-Connector # C55243, it will give you the wiring that you need. You can then use the Pollak # HM40975 instead of the 7-Way socket that is provided with the Curt T-Connector package...
view full answer... - Parts Needed to Add 4-Way and 7-Way to 2017 Chevy Silverado 1500Your 2017 Silverado 1500 should have a factory wiring harness to allow you to install a 4-way and 7-way. Right now there should be a knockout/cover where the connector would be. Check behind the knockout and you should find the wiring harness attached. This will allow you to install the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 which will fit where the knockout was. In this case the connector is the OEM part. I have attached an installation video below for your...
view full answer... - Replacement 7-Way Wiring Harness for 2002 Ford F-350 The plug on the # C55243 you were looking at will technically fit the connector on your 2002 Ford F-350. The problem is that beginning in 2002 they changed the pins so the connector fits but it won't work with models after 2001. Nobody made a specific aftermarket solution for this but there is a way to replace it with the Hopkins # 40167. The Hopkins wiring harness is designed to add 5th wheel/gooseneck wiring to the truck bed by many people have used it to replaced the OEM wiring harness....
view full answer... - 7-Way/4-Way Replacement Solutions for 2022 Winnebago Sprinter 2500Since your 2022 Winnebago Sprinter 2500 has a standard 7-way USCAR connector any of the Hopkins 7-way/4-way styles would work so it would come down to the style you like the best. The # HM40975 is a great option that has doors that open from the sides which is very commonly found on GM trucks. Or if you prefer what looks like a standard 7-way with a 4-way attached to the side you would want the part # 30955. This is what I have on my Tahoe and it works great.
view full answer... - Will Draw-Tite Trailer Hitch Let Spare Tire Remain on 2001 Ford F-350?I took a look at the installation instructions for Draw-Tite # 41922 and you will be able to retain the spare tire on your 2001 Ford F-350 though it may need to be loosened for the hitch to install. I cannot guarantee that you will not have to move the connectors however. That would not be difficult however, as you can use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 which you'll only need to plug your factory wiring into and mount along the hitch. I've added...
view full answer... - Recommended Trailer Hitch for Towing a Car Hauler with a 2011 Dodge Ram 1500Between the trailer and the vehicle, you'll likely be towing a load just shy of 6000 lbs. The Draw-Tite Class III hitch you referenced, part # 75662 has a capacity of 6000 lbs towing/ 600 lbs tongue weight, so the load you're carrying might be too much for that particular hitch. I'd recommend confirming the combined weight of the Corvette and the car transporter. If it's under 6000 lbs, the # 75662 would be a good choice. If it's over that amount, I'd recommend a higher capacity hitch like...
view full answer... - How To Add 4-Way To Truck With 7-Way Trailer ConnectorThe easiest option to tow a trailer with 4-way when you have a 7-way would be an adapter, the Adapter 7 Pole to 4 Pole part # 47345. If you need to use both or would just like to have both accessible at the same time then you can swap out the existing 7-way with a 4 and 7-way, the 7-Pole and 4-Pole Trailer Connector Socket part # HM40975-11998 or just the 7- and 4-Pole Trailer Connector Socket part # HM40975.
view full answer... - Tow Ready Custom Fit Vehicle Wiring Harness for 2014 Jeep Grand CherokeeMy contact at TowReady advises that harness # 118425 will not work on the 2014 model year due to the new tail lights but suitable harness options can be seen on the linked page. All are intended for vehicles that have the factory tow package. You can choose 4-pole or 5-pole flat type connectors or a round RV-style 7-way/4-pole combination like # HM40975 which is illustrated in the linked video.
view full answer... - Will A Loose Fit With the Curt Echo Inside a Trailer Connector Cause Connection IssuesThe connection issues you are having with the Curt Echo Mobile Trailer Brake Controller part # C51180 is most likely caused by the loose fit you said you had inside the trailer connector. The factory trailer connectors do not always provide the best fit as the tolerances can vary greatly. Therefore, I recommend you replace the factory trailer connector with the 7- and 4-Pole Trailer Connector Socket part # HM40975 as this will have the tight fit that you need with the Curt Echo.
view full answer... - How To Find the Fuses For the Trailer Lights On a 2006 Dodge Ram 2500 DieselYes, there will be fuses for the trailer lighting circuits on your 2006 Dodge Ram 2500 Diesel. In order to find out which fuse is responsible for the lighting circuit you are having an issue with you will need to look in the Integrated Power Module which is in your engine bay. Once you pull the cover, the bottom side should then list the circuits that correspond to the fuse locations. The owner's manual does not list these so I cannot provide you with exact locations. If you end up needing...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.