7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Our Price: $36.62
Confirmed to Fit
2008 Dodge Ram Pickup
Cab and Chassis
Pickup with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2379)
- Q & A (0)
- Photos
2008 Dodge Ram Pickup - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- 7 Round - Blade
- 4 Flat
- Trailer Hitch Wiring
- Hopkins
- No Converter
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Dodge Ram Pickup's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Dodge Ram Pickup End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2379 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: JimH05/13/2024
Very high quality connectors and bracket. Just what I needed.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
25
2378
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- What Trailer Wiring Setups Will Pollak 7/4-Pole Trailer Connector Socket w/ Mounting Bracket FitIf there is a factory 7-way at the rear of your 2001 Chevy Silverado the part # HM40975 will plug straight into the round connector that is there at the rear of the truck. If you check out the picture I attached you will see the round blue connector that the # HM40975 is designed to connect to. If that connector is present at the rear of either of your trucks it will simply plug in and be ready to go. If that connector isn't there you would need to wire in the part # PK11998 to the wiring...
view full answer...
- Where Is Trailer Connector Located On 2016 Chevrolet Express Van 3500 W/ Factory Tow PackageSince your 2016 Chevrolet Express Van 3500 has the factory tow package, it should have a factory installed 7-way trailer connector. If there is not one, look underneath the bumper/spare tire area of the van for a connector that resembles the harness shown in the included picture of the # 41157. If you have this connector then you can install a 4-way/7-way connector combination # HM40975 that you were looking at without any issues. Now if you cannot find the connector then your van may...
view full answer...
- Lost Power To 12 Volt Circuit On 7-Way For a 2006 Chevy Silverado 2500The 12 volt power circuit on the 7-way trailer connector of your 2006 Chevy Silverado 2500 comes from the power distribution center which is simply the fuse box in your engine bay. There is a 40 amp fuse you need to check located next to the #1 stud. I also recommend you check that the ring terminal attached to this stud is secure. If all else fails you can run your own power wire directly to the battery from the 7-way with part # 10-1-1 and part # 9510.
view full answer... - Replacement Vehicle 7 Way Plug for 2014 Ram 1500 with Factory Tow PackageYes, you can use the Mighty Cord # A10-7072VP to replace the damaged plug receptacle on your 2014 Ram 1500. You could also use the Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 if you want to add a 4 way to your existing 7 way plug.
view full answer... - EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector 2021 Toyota 4RunnerThe EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector # 319-S7-06 will connect to the factory plug on your 2021 Toyota 4-Runner. It does not offer a clip mount system like your current factory Trailer Connector # HM40975. Instead you would need to use the included self tapping screws to secure the magnetic connector in place. The EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector # 319-R7-06 does allow you to keep your factory 7-way/4-way...
view full answer...
- Brake Controller Installation-2014 Chevy SilveardoWhen used in conjunction with the # 3016 brake controller wiring adapter, the # 39523 brake controller would be plug and play. The controller wiring adapter would plug into the connector located in the convenience panel located behind the emergency brake pedal as shown in the provided photos. If your Silverado was not equipped with the factory 7-way, you can install the # HM40975 which would plug into the harness at the rear bumper. If you click the provided links, you can see some install...
view full answer...
- Only Some Trailer Lights Work with 2005 Nissan Titan with Factory Tow PackageWe do separately offer only the relays for Nissan vehicles that come as part of the kit you referenced, part # N40975. The three relays by themselves are available as part # C57000. I have linked a video showing installation of these relays in a 2011 Titan. These install in the relay box behind the battery; the underside of the box cover should have labels for each relay socket. If these relays are missing or damaged then this kit should take care of the issue. You might also want to check...
view full answer... - Removing Cover of Fuse Box on 2003 Chevy Silverado HD to Activate Trailer Charging SystemThe fuse box in your 2003 Chevrolet Silverado HD is located on the driver-side engine compartment. Opening it will require removal of a support bracket in the corner closest to the driver. The fuse box is just forward of this bracket. With the bracket removed the top cover of the Accessory Fuse Block can be snapped off. Next you will remove the lower cover to reveal the auxiliary positive power posts. Please refer to the linked article on brake controller installation which provides detailed...
view full answer... - Recommended 4 and 7-Way Trailer Connector and Brake Controller for 2021 Toyota TacomaI have the perfect option for installing both a 4 and 7-way trailer connector on a 2021 Toyota Tacoma and it's with the Tekonsha OEM Replacement Vehicle Wiring Harness part # 22117. This is the only completely plug-in kit that provides a 7-way connector. That said, in order to have both 4 and 7-way's you'd need to swap out the connector that comes with for the 7- and 4-Pole Trailer Connector Socket part # HM40975. The Tekonsha OEM Replacement Vehicle Wiring Harness will also allow you...
view full answer... - Adding a 4- and 7-Way Trailer Connector to a 2001 Ford F-250 with Factory Tow PackageYes! The wiring harness part of # 118243 will plug into the back of 7- and 4-Way connector # HM40975 on your 2001 Ford F-250. Both connectors have the same receptacle in the back so they are compatible with that harness in 118243. I have linked a couple of videos for these parts for you.
view full answer... - 7-Way Wiring for 2011 Ford Explorer Limited Without Factory Tow PackageSometime auto makers include certain features, like tow wiring connectors, even on vehicles that do not have the tow package. The term's exact meaning varies by auto maker, car model and even by year. If your Explorer has the mating rectangular connectors to join those on # C56278 then all you may need to do is install some fuses and/or relays in the power box under the hood. It all depends on how the car was equipped at the factory. If you check under the car and instead find a round...
view full answer... - Low Voltage on 7-Way of 2017 Ford F-250 Super DutyThere are a couple things that may be causing the low voltage you are seeing on the 7-way of your 2017 Ford F-250 Super Duty. The first is a poor ground, so check to ensure the ground is good as this can cause the issue you are having. The other likely problem is corrosion on the pins of the 7-way so you will want to check to see if the pins have corrosion and either clean them or replace the 7-way with the Curt T-Connector Vehicle Wiring Harness # C55774 or 7- and 4-Pole Trailer Connector...
view full answer... - Recommended Trailer Hitch, Wiring, And Weight Distribution For 2015 Jeep Grand CherokeeThe towing capacity for your 2015 Grand Cherokee depends on how your vehicle is equipped. The difference in engine, transmission and suspension determine the towing capacity for your Jeep. I found the towing chart in the owner's manual and have attached it for reference. The towing capacity range for your vehicle is between 6,200-lbs and 7,400-lbs. The trailer hitch I recommend is the Curt, part # C13182. This is a Class lll hitch and it has a 2-inch receiver opening. No drilling is required...
view full answer...
- Troubleshooting Right Turn and Running Lights on Trailer Towed by 2007 Ford F150I would recommend starting at the 7-way connector at the rear bumper of your truck. Use a circuit tester like part # PTW2993 and activate the right turn signal. Test the pin in the 3:00 position. The tester should flash with the turn signals. When the brake pedal is pressed, this pin should light up the tester as well. Repeat the test on the pin in the 9:00 position which is the left turn/brake and the pin in the 11:00 position, which is the running/ marker lights. Check the pins for excessive...
view full answer... - Does Hopkins 4-Way/7-Way Kit for 2018 Ford Escape Plug Right In To Vehicle WiringSince your 2018 Ford Escape has the factory tow package the Hopkins 7-way kit part # HM40975 plugs right into it and also has a 4-way that is to the side of it like you mentioned. This would plug straight into the round connector your Escape has for trailer wiring currently.
view full answer... - Hitch and Wiring Harness for 2014 Nissan PathfinderI have attached a video of the Curt Trailer Hitch Receiver, # C13126, being installed on a 2014 Nissan Pathfinder for you. As for the Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, this would be used in conjunction with a factory pigtail which comes with the factory tow prep package. I have also included a video which shows the process. In order to equip your vehicle with a 7 way and not use the factory pigtail, you would need to install T-One Vehicle Wiring Harness, # 118670,...
view full answer... - Location of Trailer Brake Controller Installation Port on 2016 Ford ExplorerYour 2016 Ford Explorer will have an under-dash brake controller connection port as long as it came from the factory with a 7-way trailer connector like # HM40975. The port should be located above your left knee (as you're seated in the driver's seat). It may be necessary, according to my technical contact at Tekonsha, to remove a black plastic appearance panel on the dash to get access to the controller port. Once you find it you need only wiring adapter # 3035-P to install the Prodigy...
view full answer... - Replacement 7 and 4-Way Recommendation for 2005 Ford F-250The part # HM40975 normally would plug right in to the 7-way wiring of your 2005 Ford F-250, but if for some reason you have a totally hardwired setup your other solution would be to use the part # HM40975-11998 which would allow you to hardwire the setup to your vehicle wiring.
view full answer...
- 7 and 4-Way Replacement Recommendation for 2010 Toyota TacomaWe have the part # 74682 which would replace your current 7-way and give you a 4 and 7-way. Or we have the # HM40975 which uses the same type of round connector that would also work.
view full answer... - Correct Replacement 7-Way Trailer Connector for 2010 Toyota TacomaIf you have a factory seven way trailer connector on your 2010 Toyota Tacoma there's probably a 90% chance it's either going to be the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket part # PK11893 or 7- and 4-Pole Trailer Connector Socket part # HM40975. These both install using the same USCAR plug so they will be direct plug-in replacements. If you have something different, please send me a photo and I'd be glad to see if we have another replacement for you.
view full answer... - Parts Needed to Add 4-Way and 7-Way to 2017 Chevy Silverado 1500Your 2017 Silverado 1500 should have a factory wiring harness to allow you to install a 4-way and 7-way. Right now there should be a knockout/cover where the connector would be. Check behind the knockout and you should find the wiring harness attached. This will allow you to install the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 which will fit where the knockout was. In this case the connector is the OEM part. I have attached an installation video below for your...
view full answer... - Is the 7- and 4-Pole Trailer Connector Socket a Fit for Ford TrucksThe 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998 is a hard wire application, as you can see in the linked installation video we made of this being put on a 2008 Ford F-250. If you only need to connect the plug, which is 7- and 4-Pole Trailer Connector Socket # HM40975, that is a direct replacement for many different years, makes and models of Ford trucks with a factory 7-way; for example it is a fit for a 2018 Ford F-150. If you let me know...
view full answer... - How to Get a Trailer Hitch for a 2007 GMC EnvoyFrom our understanding all of the 2007 GMC Envoys came with a factory hitch. Aftermarket hitch manufacturers actually don't sell a hitch for your vehicle because of that. You may have to contact a GMC dealer to track down a factory hitch as I don't see any other options. You should also have a factory trailer wiring setup as well. But if the socket is missing you could get the # HM40975 that will plug into the factory harness.
view full answer... - Fit of Curt Class IV Trailer Hitch # 14080 on New Body Style 2000 Chevy TahoeFor the 2000, the Tahoe was a split model year. The Tahoe Limited and Z71 were produced on the GMT400 platform, which was the frame used by the previous model year. Since your Tahoe is the 'new body style' produced on the newer GMT800 platform the Curt Class IV hitch you mentioned, part # 14080 would be a fit for your vehicle. As you can see in the instructions I've linked, the hitch is an easy install, utilizing existing holes in the truck frame so no drilling is needed. You might also...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.