Stabilizer Jacks For Rear End Of Enclosed Cargo Trailer.
Question:
I am looking at buying a 7 x 14 or 16 enclosed cargo trailer and I know that I will need a set of jacks to keep the rear from tipping up every time I step in from the rear before some of the cargo is loaded in the nose. I like the design of the SJ-R208 but I dont want to install it on the outside of my trailer. My question is will I be able to weld it to the inside of the frame and not have to cut a hole in the floor or the framing?
asked by: Charles C
Expert Reply:
Great question.
Without cutting a hole you wouldn't be able to get enough clearance for the jacks to work. I would strongly recommend using them on the outside to prevent clearance issues and probable damage.
However, I think you would be better off going with the Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
# 288-01892-2 you can mount them underneath and then they can fold up and out of the way.
Products Referenced in This Question
Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 0 - 1000 lbs
- Drop Down Jack
- 22-1/4 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- Stallion
more information >
Product Page this Question was Asked From
Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 1001 - 2000 lbs
- Drop Down Jack
- 18 Inch Lift
- Weld-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Article: Trailer Tire Sizing
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Brake Controller
- Shop: Light Guide LED Truck/Trailer Light - Backup and Tail - Submersible - 12 Diodes - Oval - Clear Lens
- Shop: Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
- Video: Optronics Trailer Lights - Tail Lights - BUL602CRB Review
- Video: Stallion Stabilizer Jacks Review
- Video: Stallion Camper Jack - Stabilizer Jack - 288-01892-2 Review
- Shop: Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: Hopkins 7-Way Molded Trailer Wire Connector - 11' Long
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Fulton Camper Jack - Stabilizer Jack - FSJ1-SJ2 Review
- Video: Optronics Trailer Lights - Tail Lights - BUL52CB Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84546UC3 Review
- Search Results: stabilizer
- Shop: Transmission Cooler
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Q&A: Self-Adjusting Brakes Will Not Lock Up Trailer After Fresh Install
- Q&A: Do the Diodes and Ring Light Up Separately on the Optronics GloLight LED Backup Light
- Search Results: dexter axle d35
- Search Results: backup lights
- Shop: Tool Box
- Shop: Wheel Cover
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: red69fr
- Search Results: l68111
- Q&A: Recommended Stabilizer Jacks For 2015 Thor Freedom Elite Motorhome