B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
(127 reviews)
Price: $55.00
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
Our Price: $55.00
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
10% prefer this
5% prefer this
- All Info
- Reviews (127)
- Q & A (0)
- Photos
B and W Trailer Hitch Ball Mount
- Fixed Ball Mount
- Fits 2 Inch Hitch
- Drop - 2 Inch
- Rise - 1 Inch
- No Ball
- 16000 lbs GTW
- Class IV
- B and W
- Steel Shank - Gloss Black
- 1-1/4 Inch Ball Hole Diameter
Heavy-duty, sturdy steel ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Sturdy steel construction
- Corrosion-resistant, high-gloss black powder coat finish
- Both drop and rise positions available to ensure level towing
- Hitch pin and clip or hitch lock sold separately
- Made in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 16,000 lbs
- Tongue weight: 1,600 lbs
- Length: 8-1/2" from center of hitch pin hole to center of ball hole
- Rise: 1" from top of inside of hitch opening
- Drop: 2" from top of inside of hitch opening
- Ball hole diameter: 1-1/4"
- Pin hole diameter: 5/8"
- Shank length: 6"
- Limited lifetime warranty
BMHD30010 B and W Class V Ballmount - 2" Drop, 1" Rise - 16,000 lbs
Item # BWBMHD30010
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs - BWBMHD30010
Average Customer Rating: 4.9 out of 5 stars (127 Customer Reviews)
Heavy-duty, sturdy steel ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.by: Jon01/27/2023
I have used B&W hitches for many years and I've been very happy with the quality of their products. etrailer makes it easy to shop for these hitches since the B&W site is terrible. I was able to find the correct size and all dimensions were listed clearly. Thanks again!
by: Andy 10/10/2023
heavy solid fits thanks
by: David 04/12/2023
It is refreshing to still see American companies selling “Made in USA” quality these days.
by: David01/21/2021
Ball mount is awesome and super high quality and heavy duty over and above what I will need to tow my 7000 pound car trailer but I like it that way! Great job to everyone involved. My hat is off to the fabricators, made in USA Mount arrived without a nick, perfect weld marks and flawless show quality paint job. I may not even use it, it is that nice. Maybe put it in a display case and start a collection. Fast shipping, 2 days
by: Alan 01/21/2022
Really heavy duty solid steel 2 inch square, really thick steel tongue and and tight fitting hole for the ball bolt so little chance of ball rattle or slipping. Nice smooth welding and finish.
by: Lorenzo05/03/2018
Product is extremely heavy duty. much more than I will need, but I appreciate quality made is USA products. Etrailer packaging not so great. Box was torn by weight of this item, which caused a chip in the finish of the item.
by: James 04/26/2023
Great product would purchase again.
by: Joe03/23/2017
Solid shaft, weighty, but expecting a long life from it. I'll have to hunt around for someone who has the right tool for getting [torque specs] on the ball, but shouldn't be a big problem. Package tracking was excellent and on time.
by: Ruben07/26/2018
Made from solid bar stock. B&W Made in the USA can not go wrong. Thank you Stacy for helping me order this product.
by: David09/27/2021
etrailer is the best.
by: Steve09/03/2021
Very nice, heavy duty and worth the extra couple of bucks, plus Made in USA.
by: Tom 08/20/2018
Excellent quality, made in USA.
by: Ron M03/10/2020
Does great job when needed
by: George B07/09/2016
Seems like a quality product, nothing special but general build quality is overall good.
by: Brandon 03/06/2017
Good quality. Does what it's supposed to do.
by: Al05/05/2018
Product was received just as listed, prompt service and shipping,
by: Carl04/18/2018
Heavy duty. Made from a solid piece of steel. Looks good well made
by: John 10/02/2019
Everything came in ahead of schedule and in perfect condition
by: Oregon12/27/2021
Nice mount.
by: Sean 07/08/2022
Worth the money. Best in class.
by: MN06/10/2017
Very sturdy high quality product.
by: JOHN05/08/2014
EVERYTHING WORK OUT GREAT.
by: Jason 11/12/2021
Heavy duty and exactly what I was looking for.
by: Allen 03/09/2024
by: Jim 05/14/2024
25
395
Show More Reviews
See what our Experts say about this B and W Trailer Hitch Ball Mount
- Thickness of Hitch Ball Platform of B&W Heavy-Duty Ball MountThe thickness of the platform the hitch ball sits on is 1 inch for the B&W Heavy-Duty Ball Mount # BWBMHD30011. This ball mount has a 16,000 lb capacity and 1,600 lb tongue weight capacity while giving you either a 1 inch rise or 2 inch drop. To secure it to your hitch you'll need Pin & Clip # PC3. For a hitch ball, depending on the size you need, I recommend either 2" Hitch Ball # C69FR or 2-5/16" Hitch Ball # C40008. I have added a link to a video review for you to check out as well...
view full answer... - Where Is The Brophy Ball Mount # EA60 ProducedThe Brophy Ball Mount # EA60 is produced overseas, I recommend The B&W Heavy-Duty Ball Mount - 1 inch Rise, 2 inch Drop - 8-1/2 inch Long - 16,000 pounds # BWBMHD30010 is made in the USA. I also recommend The 2-5/16 inch Hitch Ball - 1-1/4 inch Diameter x 2-3/4 inch Long Shank - Chrome - 12,000 pounds # 19286, and The Pin and Clip for 2 inch and 2-1/2 inch Hitches - 5/8 inch Diameter x 3-1/4 inch Span # PC3. I attached a review video link below.
view full answer... - How to Pick Out the Correct Rise/Drop Ball Mount to Tow a Trailer LevelThe amount of drop you would need for a ball mount to use with your 2012 Range Rover Sport will depend largely on the trailer you plan on towing. The goal is to pick a ball mount that will allow your trailer to be towed as level as possible. To see how to pick out the correct ballmount rise/drop check out the FAQ article I attached to the right. It covers everything. Once you know what drop you need I also attached a link to the right that has all of the ball mounts we carry. You will...
view full answer... - B&W Trailer Hitch and a Wiring Harness for a 2001 Chevy Silverado 2500HD with 6-1/2 Foot BedYes, B&W trailer hitch # BWHDRH25182 will fit your 2001 Chevy Silverado 2500HD with 6-1/2 foot bed. I have included a link to the installation instructions for you and a video showing an example installation on a similar truck. The recommended ball mount is # BWBMHD30010 which has a 1 inch rise or 2 inch drop. If you need a pin and clip use # PC3. For a 2-5/16 inch ball use # 19286. For a 2 inch ball, # A-90 will fit. And if your truck does not have a trailer connector already I recommend...
view full answer... - Comparing B&W Heavy-Duty Ball Mount to Curt Heavy Duty Ball MountThe BandW Heavy-Duty Ball Mount - 1 Rise, 2 - 8-1/2 Long - 16,000 lbs # BWBMHD30010 is very similar tot he Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 1" Rise, 2" Drop - 15,000 lbs # C45331 which has the same hitch ball shank dimension of 1-1/4 inches as well as the same rise and drop. Another benefit is the hitch ball is already installed and torqued to spec. Both are quality ball mounts with the B&W having a slightly higher rated capacity. Stock levels change constantly...
view full answer... - 16K Rated Ball Mount Made in the USA for 2 Inch Trailer HitchesThe B&W ball mount # BWBMHD30010 is made in the USA. This one is 8-1/2 inches long but there is a longer one, # BWBMHD30011, which is 10-1/4 inches long.
view full answer... - Does the B&W Hitch BWHDRH25217 Fit a 2008 GMC Sierra 1500?Yes, the B&W Heavy-Duty Trailer Hitch Receiver item # BWHDRH25217 will fit your 2008 GMC Sierra 1500 with an 8 foot bed. This hitch is custom fit and bolts directly to your Sierra's frame with included hardware. I have linked an installation video below. You will also want the B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs item # BWBMHD30010 and 2" ball item # A-90 or 2-5/16" ball item # BWHB94050.
view full answer... - Replacement Hitch Ball to Increase Ball HeightIt is always important to keep your trailer level when hitched to your tow vehicle and the two simplest ways to accomplish this are either a high-rise hitch ball such as the two you reviewed, parts # C40033 and # C40034, or a ball mount with the amount of rise you need. Either option will work. The hitch balls you referenced are shown in the linked photo; I have added the dimension above the mounting surface for each ball. If you have a 2-inch hitch receiver and want to use your existing...
view full answer...
- Will the B and W Hitch part # BWHDRH25132 Fit a 1996 Dodge Ram 1500 6 foot BedYes, the B and W Heavy Duty trailer hitch part # BWHDRH25132 that you referenced is a confirmed fit for your 1996 Dodge Ram 1500 6 foot bed that has either a standard or step bumper. For a heavy duty hitch with as much capacity as this hitch has you really aren't going to find a better deal. For a ball mount you would want the part # BWBMHD30010 and then for a 2-5/16 inch ball part # BWHB94004.
view full answer... - B&W Trailer Hitch Options for a 2007 Chevy Silverado Classic 2500 with 8 Foot BedWe don't have a picture but I can tell you that once installed trailer hitch # BWHDRH25187 will have its receiver directly below the bumper and the face of the receiver will be basically flush with the rear bumper. Please note that this hitch is designed to fit a 2007 Chevy Silverado Classic 2500 with an 8 foot bed AND 10 inch step bumper. If the truck has the regular step bumper you would use # BWHDRH25189. It will also be right under the rear bumper and the receiver will be about flush...
view full answer...
- What Length Ball Mount Do I Need To Use?Longer ball mounts are helpful for creating clearance from the rear of the vehicle to allow you to lower your tailgate while towing and not interfere with a tongue mounted jack or install hitch mounted accessories (like bike racks) that may require more clearance from the rear of the vehicle. The length that you'll want to use really comes down to whether or not you really need an extra 1-3/4" between your trailer coupler and your truck. For all intents and purposes, the # BWBMHD30010...
view full answer... - Are There Any Made in the U.S.A. Heavy Duty Ball Mounts for 2" Receivers Available?No. While Curt is an American company and manufactures a great deal of their products in the U.S.A., the Heavy Duty Forged Ball Mounts like the # C45340 is not one of those products. If you're looking for a ball mount that is made in the U.S.A., the B&W Heavy-Duty Ball Mount # BWBMHD30010 has a 16,000-lbs capacity and the same 1" rise/2" drop as the Curt model you were looking at.
view full answer... - Will Curt Trailer Hitch Receiver # C15409 Fit 2006 Dodge 2500 Mega Cab With OEM HitchThe hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15409, is a 2 inch receiver, and can be installed along with an OEM receiver, on your Dodge Ram 3500. The towing capacity for this hitch is 17000 lbs, and it also has a tongue weight capacity of 2550 lbs. No ball mount, clip or pin is included, so I would recommend B&W Ball Mount, part # BWBMHD30010. I would also recommend Pin and Clip, part # PC3. For a 2-inch hitch ball, I would recommend part # A-90. It has a...
view full answer...
- Recommended Trailer Hitch Receiver For 1997 Ford F-250 With Deep Drop BumperThanks for the pictures! The trailer hitch receiver I recommend for your 1997 Ford F-250 HD Is the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" # BWHDRH25198 which has a 7-3/8" drop which is measured from the bottom of the frame to the top of the receiver tube. Since in the picture you provided you measured about 5" from the bottom of the frame to the bottom of the bumper you will have plenty of clearance. The # BWHDRH25198 has a 1600lb tongue weight rating and a...
view full answer...
- Hitch Recommendation for 1997 Ford E-350 Passenger BusGood news, I can help you find a hitch that will fit your 1997 Ford E-350 Bus. The fact that this is a bus means that the cab is a Ford E-350 but the chassis is not the same as the standard van chassis. This means that you will need a bolt-on or weld-on hitch depending on your chassis' application, like Draw-Tite Class IV # 41991-16 or the same Draw-Tite hitch with shorter brackets # 41991-07. If you wanted to complete your towing setup you may also be interested in the Curt Hitch Pin...
view full answer...
- Will Curt Trailer Hitch, # C15323 Fit a 2011 Chevy Silverado V-6, 2-Wheel DriveThe Curt Trailer Hitch, # C15323, is designed to fit a 2011 Chevy Silverado 1500 series, so it should fit your truck. I have included a link to the installation details. The recommended ball mount for this hitch is # 40331 or # BWBMHD30010, and you can use ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, you can use Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End, # HM40975. I have included a video below showing a typical...
view full answer... - Installation of the Draw-Tite Class III Trailer Hitch On a 1989 Dodge B1500 VanWe do not have an installation facility in Connecticut. We do offer detailed instructions on how to correctly install the # 75140 hitch on the 1989 Dodge B1500 Van. This hitch installation is very easy and does not require drilling or welding, if you have basic mechanical skills you could install the hitch yourself. Be aware that the hitch isn't compatible with step bumpers-only the stock bumper. If you decide to purchase the hitch, you will also need a drawbar, item # BWBMHD30010, pin...
view full answer... - Is Adjustable Ball Mount Available That Uses Hitch Ball With 1-1/4 Inch ShankThe ball mounts we offer that use a ball with a 1-1/4 inch shank are all fixed mounts like part # BWBMHD30010, This ball mount features a 1 inch rise or 2 inch drop and is rated for up to 16,000 lbs. Another ball mount that uses a 1-1/4 inch ball shank is part # 40331. This features a 3 inch rise or 4 inch drop. We do not offer an adjustable ball mount that can accommodate a hitch ball with a 1-1/4 inch shank.
view full answer... - Which Trailer Hitches Will fit a 2002 Ford E150 Econoline VanThere are several hitches available for your 2002 E-150 Econoline Van. I have posted a link below of all of the hitches available. I would recommend the Draw-Tite Trailer Hitch for the 2002 Ford Van, item # 75703. This hitch is economically priced and can tow up to 6,000 pounds or 10,000 pounds with a proper weight distribution system, if your van has sufficient towing capacity. If you need a hitch with more capacity the Curt Class IV Trailer Hitch, item # 14055, will install on your...
view full answer... - Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb BoatI'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be classified...
view full answer... - Will Curt Trailer Hitch # 14055 Fit Around the Spare Tire on a 2010 Ford Full Size VanI spoke with my contact at Curt regarding trailer hitch # 14055 for your 2010 Ford Full Size Van. She stated that it will fit around the spare tire when installed. I have included a link to the installation details below as well as a video showing installation on a similar vehicle. If you plan on doing some towing, the recommended ball mount is # BWBMHD30010 and hitch ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, use # 118551, or if you have the...
view full answer... - 2-5/16 Hi-Rise Ball Options For Additional HeightWe have 2 high rise hitch balls that have the 2-5/16 inch diameter, and they both have the 1-1/4 inch shank. We have the 2 inch rise # C40034 and the 1 inch rise # C40033. There is not a 2-5/16 inch hitch ball that has a 1 inch shank. If you want a ball mount that will work with this, I recommend the B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs # BWBMHD30010.
view full answer... - Hardware Included for Installation of Curt # 14055 Hitch Installation On 2004 Ford VanYes the Curt Class IV Trailer Hitch, item # 14055 includes all necessary hardware, bolts, washers and spacers needed for installation. I have included a link for install instructions for you to review. Some items you may need with the Class IV hitch are listed below. Wiring # 119178KIT Drawbar # BWBMHD30010 Hitch Ball # A-90 or # 19286 or # 63836 Hitch Lock Kit # e99039
view full answer... - Draw-Tite Hitch # 75140 Recommendation for a 1987 Dodge Van B 250 SportsmanYes, this Draw-Tite Ultra Frame Trailer Hitch Receiver # 75140 that you referenced would work on your 1987 Dodge B 250 Sportsman Van. I attached installation instructions for you to check out if you like also. You may be interested in the following products to complete your towing setup: 4-Pole Hardwire Kit Including Circuit Tester # 18252 Ball Mount # BWBMHD30010 Hitch Ball # 19286 Hitch Ball # A-90 Pin and Clip # PC3
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Written by:
Lindsey S
Video Edited:
Jacob T
Expert Research:
Adam R
Installed by:
Cole B
Installed by:
Adam E
Video by:
Chris R
Updated by:
Kristina F
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ronald M.
3/11/2021
Very good