Does Replacement Tongue for Yakima HoldUp Come with Hitch Pin and Nut Retainer

Question

Question:

Does 8880580 come with anti-rattle 5/8 nut and retainer? and only need Y8890200 bolt pin to secure?

asked by: Sky N

0

Expert Reply:

The Replacement Tongue # 8880580 does not come with a hitch pin or the nut/retainer. You'd need the part # Y8890200 and the # 8890260 which is the retainer and nut.

expert reply by: Jameson C

0

Answer 1

The Replacement Hitch Hardware for Yakima HoldUp or BigHorn Bike Racks Manufactured in 2008 or Later #8890260 is the internal anti-rattle you find in the more recent model years. This is the same pin as the #Y8890200 which was not threading correctly…

view full answer...

Answer 2

The Yakima Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260 that you referenced is Metric.

view full answer...

Answer 3

The Replacement Tongue for Yakima HoldUp Bike Racks #8880580 will keep the Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260 in place still inside the tongue when you remove the tongue from your receiver. The Yakima hold up requires…

view full answer...

Answer 4

We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not…

view full answer...

Answer 5

The Yakima Holdup 2 bike rack 2009-2012 which fits inside a 2" receiver is model number 8002433. This will use the Replacement Tilt Pull Pin #Y39FR. The Anti-Rattle #8890260 is the correct anti-rattle as is the End Cap #8880228. I do not see…

view full answer...

Answer 6

The Curt RockerBall Anti-Rattle Towing Kit #C43KR takes the additional height of the base of the RockerBall into account for the listed 4" rise and 5" drop. I have attached an image below showing how it is measured. Typically, you find the…

view full answer...

Answer 7

Yes, Replacement Mounting Hardware for Yakima HoldUp 2 Bike Rack for 2" Hitches Item #8890260, is compatible with Yakima locks such as #Y07235.

view full answer...

Answer 8

For your Yakima Hold Up, the Replacement Spine #8890277 will require the Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260. The 1-1/4 inch hardware will not be the correct fit for the larger shank.

view full answer...

Answer 9

From what I have found you're talking about the Curt Anti-Rattle Kit for Hollow Shank Accessories #C69HR, #C22321, and #F-315. The #C22321 and #C69HR are both for a 2" hitch but the #C22321 fits a receiver with a 5/8" pin hole while the…

view full answer...

Answer 10

For this you will need the Curt Ball Mount #C45070, Curt Anti-Rattle Kit #C69HR and the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball #C82KR. The ball mount and anti-rattle kit are the same ones that are included with the Curt RockerBall…

view full answer...

Answer 11

It sounds like you are actually talking about part #8890260 with the pin and anti-rattle nut and housing. On the outside of the rack shank close to the end you will see 2 holes with part of the black plastic nut housing in them. These hold the nut…

view full answer...

Answer 12

There is an SKS lock end that works with the #8890260 with the part #Y07235 but by the time you add up the cost of both parts you are better off going with a similar universal setup like the #63232 since the price is better and would work just as…

view full answer...