Replacement Hitch Pin and Lock for Yakima Fourtimer Bike Rack

Question

Question:

Just making sure all this stuff matches: Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers - Y8890200 Replacement Body for Yakima HitchLock 2007 and Newer - 8820048 Replacement SKS Lock Core for Yakima Racks and Carriers - A137 Replacement Key for Yakima Racks and Carriers - A137 This is all for my Yakima Four Timer with a 2inch hitch

asked by: Justin L

0

Expert Reply:

I checked with Yakima and for their Fourtimer bike rack part # Y02469 the correct hitch bolt is the part # 8890260 and then for the matching lock assembly you'd need the # 8820048.

expert reply by: Jameson C

0

Justin K.

11/23/2021

Just making sure all this stuff matches: Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers - Y8890200 Replacement Body for Yakima HitchLock 2007 and Newer - 8820048 Replacement SKS Lock Core for Yakima Racks and Carriers - A137 Replacement Key for Yakima Racks and Carriers - A137 This is all for my Yakima Four Timer with a 2inch hitch

Reply

Jameson C.

11/23/2021

The part # Y8890200 does not fit your FourTimer. If you are wanting an all new hitch bolt and clip for the Fourtimer you would want the part # 8890260 with the lock core # 8820048. For a Yakima A137 lock core then you'd need the part # Y8771-A137. To install this lock core you'd need the control key part # Y8007835.

Reply

Answer 1

Yes, I checked with Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks part #8890260 will work with the Yakima FourTimer 4 Bike Platform Rack part #Y02469. The Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks…

view full answer...

Answer 2

For the Yakima FourTimer, you'd use the #Y8890200 anti-rattle hitch bolt. I've confirmed this with Yakima.Y8890200

view full answer...

Answer 3

We do have what you need but I checked with Yakima for you and the part you mentioned will not work with a Yakima FourTimer bike rack. Instead, there are a couple of parts you that you need, and I verified this with Yakima for you: - Replacement…

view full answer...

Answer 4

According to Yakima, the difference between the Replacement "A" Wheel Tray Assembly #8880796 and Replacement "B" Wheel Tray Assembly #8880797 is the following: "Look at the base of the wheel cup and look at the cut out above…

view full answer...

Answer 5

Please see below for our full list of replacement products for the Yakima FourTimer #Y02469 Bike Platform Rack. Replacement "A" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks - Qty 1 #8880796 Replacement "B"…

view full answer...

Answer 6

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

view full answer...

Answer 7

The Yakima HoldUp Bike Rack for 4 Bikes - 2" Hitches - Frame Mount Item #Y02443-2 does come with an anti-rattle hitch pin and lock included to secure the HoldUp to your vehicle. The threaded pin reduces movement of the rack in your hitch and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Hitch Pin and Lock for Yakima Fourtimer Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching