Wheel Masters Support Brackets for Rubber Valve Stems on 16" Wheels - Qty 4
(2 reviews)
Price: $12.90
In Stock
Wheel Masters Support Brackets for Rubber Valve Stems on 16" Wheels - Qty 4
Item # WM8029VS
Retail:$33.71
Our Price: $12.90
You Save: 62%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2)
- Q & A (0)
- Videos (1)
- Photos
Wheel Masters Accessories and Parts - WM8029VS
- Wheel Covers Hubcaps
- Hardware
- Mounting Brackets
- Wheel Masters
This bracket lets you use a tire inflation hose or a valve extender on your 16" wheel with a rubber valve stem. It supports the valve stem to keep it from bending and twisting as your wheel rotates.
Features:
- Lets you use aftermarket tire inflation hoses or valve extenders on your 16" wheels with rubber valve stems
- Supports each valve stem so that it doesn't bend or twist as wheel rotates
- Fits around valve stem and clips to wheels
- Includes 4 brackets
- Made in the USA
8029VS WheelMasters Replacement Support Brackets for Rubber Valve Stems on 16" Wheels - Quantity 4
Video of Wheel Masters Support Brackets for Rubber Valve Stems on 16" Wheels - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Wheel Masters Rubber Valve Stem Support Brackets - WM8029VS
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at these Wheel Masters Support Brackets. These are going to allow you to use aftermarket tire inflation hoses or valve extenders on your 16 inch wheels with the rubber valve stems. These are going to fit around the valve stems and then clip to the wheels to provide support for each valve stem, so it doesn't bend or twist as the wheel rotates. You are going to get four of these brackets, and they are made here in the USA, so you can trust they are gonna be good quality for you and to allow you to use those tire inflation hoses or valve extends on your 16 inch wheels with the standard rubber valve stems. That completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Reviews
Wheel Masters Support Brackets for Rubber Valve Stems on 16" Wheels - Qty 4 - WM8029VS
Average Customer Rating: 1.0 out of 5 stars (2 Customer Reviews)
This bracket lets you use a tire inflation hose or a valve extender on your 16" wheel with a rubber valve stem. It supports the valve stem to keep it from bending and twisting as your wheel rotates.by: Judy and Bill04/12/2018
I had hoped that these would solve my problem in supporting the rubber valve stem on my Winnebago motor home with 16" wheels. Not even close.
First they do not fit - See pic. Nothing like the picture on the product page. Perhaps my stems are "too" long (2-1/8") but they are what I have.
Second - the rubber grommet is about 1/4" thick and the threads on the stem are 3/8" long so, if I managed to get them on the stem there would only be about 1/8" of threads left for the valve extension - whose female threaded end is about 3/8" deep. See pic.
The last picture shows the valve extension screwed onto the stem. As can be seen - its threads are so deep there is no way it could get tight enough to contact the valve core in the stem with that grommet in place.
These must require very special rubber valve stems that are very short and have very long threaded ends.
Very disappointing.
by: Robert03/08/2019
tore the valve stem off my dolly wheel and destroyed the tire. the design needs to provide better clamping to wheel.
2
2
See what our Experts say about this Wheel Masters Accessories and Parts
- Can Rubber Valve Stems Be Used With Hose Extenders On Mercedes Sprinter Dually Rear Wheels? Wheel Masters makes Support Brackets for Rubber Valve Stems # WM8029VS on 16" wheels, that you can use with the Wheel Masters 4-Hose Inflation Kit # WM8001 on your 2017 Airstream Interstate RV.
view full answer... - Can the Wheel Masters Support Brackets part # WM8029VS fit on 15 Inch WheelsI spoke to my contact at Wheel Masters and she informed me that you should be able to use the Wheel Masters Support Brackets part # WM8029VS on your 15 inch wheels. She said that you might have to pinch the brackets to your wheels with a pair of pliers to get them to fully grab onto the rim but they should work. Check out the picture I attached.
view full answer...
- Can Wheel Masters Support Brackets # WM8029VS Work with 14 Inch Wheels I spoke with my contact at Wheel Masters regarding the Support Brackets for Rubber Valve Stems # WM8029VS referenced in your question. He stated that as long as you have standard steel wheels, these particular brackets should work just fine on your 14 inch units. It's possible that you might simply need to pinch the brackets a bit with some pliers to get them to completely grab onto the rim. There is not another bracket size available from Wheel Masters.
view full answer... - Valve Stem Support Brackets for 16 Inch Wheels with ExtendersThe Wheel Masters Support Brackets for Rubber Valve Stems on 16" Wheels - Qty 4 # WM8029VS are what you need.
view full answer...
- 135 Degree Valve Stem Extenders And Support Brackets For a Class C RV Dually WheelYes, the Wheel Masters Tire Pressure Valve Extenders # WM8029135 can stay on your class C RV while you are driving. We do have the Wheel Masters Support Brackets # WM8029VS which will provide support to the rubber valve stems. This reduces the chances of leaks caused by the rubber cracking when pulled by the weight of the extender.
view full answer... - Recommended Valve Stem Stabilizers for a 16 Inch WheelWe do carry the Wheel Masters Support Brackets for Rubber Valve Stems # WM8029VS which are designed to be used on 16 inch wheels. From the measurements and descriptions you have for your RV, I do suggest going with these. The TST TPMS for RVs # TST-507-FT-6-C is also highly recommended. This includes a booster, if needed, has flow through sensors, and can handle up to 196 psi. I do have to say that this will only cover 6 of your 7 wheels though. We do have replacement/add-on sensors (...
view full answer...
- Valve Stem Extenders for 2020 GMC Sierra 3500HD DuallyThe Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 # WM8029180 are a great option but for a little more accessibility it sounds like you'd prefer something more like the Wheel Masters 2-Hose Inflation Kit - 16" to 19-1/2" Inner Dually - Hand Hole Mount # WM8007 or the Wheel Masters 2-Hose Inflation Kit - 16" to 19-1/2" Inner Dually - Hub Mount # WM8006. This will give you an easy access to that inner tire inflation valve but you'll need to...
view full answer... - Can Valve Extenders be Used on Rubber Valve StemsWhile we do not currently carry the Pacific Dualies 18090 valve stem extenders that you mentioned, I did some research and found that the manufacturer does state that they don't recommend them for use with rubber valve stems. From what I could find it looks like this is because the design on those particular extenders may lead to leaks when used with rubber stems. With that being said, I called my contact at Wheel Masters regarding the Valve Extenders # WM8029 that you were also looking...
view full answer... - Tire Valve Extenders For a 2006 Winnebago RV On a Mercedes Sprinter 3500 ChassisFor your rear dually wheels the Wheel Masters 4-Hose Inflation Kit # WM8001-135 is the best kit for your set up. This will allow you to mount the fill points near your hub center for much easier access. The front wheels will need the Wheel Masters Tire Pressure Valve Extenders # WM8029135. These will allow you more easily reach the valve without having to use a special inflator. For wheels with rubber valve stems you will need the Wheel Masters Support Brackets # WM8029VS to stabilize...
view full answer... - Recommended Rubber Stem Tire Sensors and Stem Supports for a 2004 Winnebago Minnie 31CWe have everything you need here. For your TPMS system, we have the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster, part # TM89FR. It has 4 sensors and can be used on rubber and steel stems. It includes an LCD monitor with visual and audible alerts. I've linked to a video review of this below. For the stem supports, the Wheel Masters Support Brackets for Rubber Valve Stems, part # WM8029VS, that you referenced will work. It's compatible with rubber and steel stems. It works...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Written by:
David L
Updated by:
Wilson B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rachael H.
4/24/2018
Thanks for your product review on the Wheelmaster Support Brackets for Rubber Valve Stems, I emailed your review and pictures to our representative at Wheel Masters and she explained to me that the valve stems that you have are a longer design intended to accomodate wheel covers without needing extenders. The Wheel Master rubber valve stem support brackets are meant to be used on standard size both diameter and length valve stems. Typically standard valve stems are too short and need a solid extender, that would need additional support like these brackets from Wheel Master. If you would like to use these support brackets you would need to change out to a standard valve stem, either rubber or stainless steel and then you could use the brackets as well as an additional extender as necessary.