Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring Systems

Question

Question:

Is it possible to use a TPMS sensor on this? If not, do you have another solution?

asked by: Bob P

0

Expert Reply:

According to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension like # WM80292, # WM8029 or # WM802990 would be a better choice, as they're compatible with TPMS systems.

expert reply by: Mike L

0

Answer 1

For outer dually wheels the 45 degree angle extensions like part #WM8029 are typically the best. But that would depend on how the wheel is setup. From the pictures of the wheel on your 2016 Ford E450 I was able to find this looked like it would be…

view full answer...

Answer 2

I would be happy to help! For your 2006 Dodge Sprinter 3500 DRW you will need the 4" extenders #WM80294 and the 90 degree extenders #WM802990 to get the 5" extension you are wanting with a 90 degree bend. We do not have anything that will…

view full answer...

Answer 3

The Wheel Masters 2-Hose Inflation Kit part #WM8009 is designed for rear dual tires so this is what I recommend using. The Wheel Masters Tire Pressure Valve Extenders part #WM8029 wouldn't work well for the inside tires on a dual wheel setup.

view full answer...

Answer 4

In regards to choosing the correct valve stem extenders, this will really come down to your specific application so it would be hard for me to help you pick out a set. The Wheel Masters Tire Pressure Valve Extenders part #WM8029 usually work well on…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring Systems

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching