What our customers are saying:
Quick processing, and delivery. reasonably priced very satisfied
Bernie
Krakow, WI
Videos
for Wheel Well Liner
Help Articles
Expert Answers
Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but…
The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…
The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The overall length is 12".
I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit #TFRTT350J is designed more for Severe…
Your Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball #C60601 lifts the pin when that lever is lifted. Because that lever is broken off you will need to lift that pin and turn it 90 degrees to…
If you are asking for a suspension upgrade kit that has adjustable bags that do not use air, I am not aware of any that exist. If you are just asking for a suspension upgrade kit that does not use air, then we have the Timbren Suspension Enhancement…
The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub Cover…
For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off…
Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…
The Replacement Jam Nut #WM9072F that you referenced does look similar to the jam nuts that you are currently using to secure your Wheel Masters cover. To determine if they will fit your application though you need to measure your bolt size. This jam…
Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…
Based on my research, your 2006 Georgie Boy Pursuit 3480DS was built on a Ford F-53 chassis and has a GVWR of 20,500 lbs, though I do recommend verifying this just to be sure. If so, I checked with SuperSprings, the manufacturer of SumoSprings, and…
