Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These stylish wheel covers fit your vehicle that has 16", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this front and rear set of 16" Namsco wheel covers for eight lug wheels. It is for a quantity of four covers. This will replace a wheel cover; it will fit over the front and the rear wheels on your vehicle. You can see it's a nice, low-profile design. It delivers a nice, sleek look, and it is a 304 stainless steel construction, which is very sturdy and rustproof.
You can see they have a nice, mirror finish on them to add a nice, eye-catching shine to your wheel. These are described as an eight inaudible 00:00:33 design wheel, and what they're talking about is these holes around the outer edge, there's eight of them, so they're called an eight inaudible 00:00:40 design. These lug caps right here, they are removable; they have four snaps on them. You could actually pry those caps off and access the lug nuts if you need to. This does use a snapping retention system to ensure the hubcap won't wobble or fall off your wheel.
Just to zoom in to show you that a little more closer, you can see how this will push onto your steel wheel and hold it into place; there's no hardware required.I do want to mention that, if you look, there is a cutout area right here you can see on this retention system, and that's cut out for the valve stem. When you do install these, you always want to make sure to align your valve stem up with this cutout, and then go ahead and push the wheel covers onto the wheel. That cutout keeps it from damaging your valve stem. This is for a quantity of four wheel covers. The application, again, fits eight lug front and rear wheels.The diameter wheels this fits is 16".
A couple of inaudible 00:01:37 on these wheel covers. These wheel covers will not fit the Budd wheels or the older split rim wheels; those are two older design wheels. The Budd wheels are the stud-piloted wheels that have tapered stud holes, and they use lug nuts with a matching taper. The split rim wheels are the older design wheel that has a split ring around the wheel; that is designed to hold the tire to the wheel in case of a blowout. Both of those are older designs that aren't used much anymore.
These will not fit those, but they will fit all the other ones. That should do it for the review on the front and rear set of 16" Namsco wheel covers for eight lug wheels.
Average Customer Rating: 4.4 out of 5 stars (32 Customer Reviews)
These stylish wheel covers fit your vehicle that has 16", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
After 1 year two of the hub caps have rusted and the rust will not come out.
I purchased the set for my MB Sprinter and 1 cover was defective from the first day. The customer service was polite and sent me another new cover. I received the cover and set up the all set. After the first trip my neighbor told me when I parked my Sprinter, there was a big noise coming from the wheels when i"m driving. I scheduled a visit to the Mercedes Dealer Schaumburg thinking maybe there were some brake problems and after 1 short ride, they told me the noise coming from the wheel covers because they don't have any silicon around how the other covers have. I got a video and if you can notice the sound , make my Mercedes run like a garbage can.If they will not solve my problem, I will start the charge back with my bank , there is too much headache with this set of wheel cover, they are cip but actually they are NOT good , they all coming defective, making this noise and bother all my riders I' can't use them and is not actually my problem , this is the seller problems and between them and manufacturer, the descriptions are not accurate, they doesn't explain the covers will make "crazy noise", if I will know about that I will never buy them ...
We absolutely loved how they looked when we got them installed on the tires. However, due to unfortunate circumstances, one side was crushed against a cement pole.
Excellent product exactly what I ordered
Lost a rear wheel cover on HWY 1 in California. The other 3 original covers were showing their age, so I decided to replace them all. The black grippers appear to be much better than the originals. It’s a little tricky getting the cover completely on and I slightly dented 1 of them doing so. Makes my Class C look much better now.
These Namsco covers have a nice finish and look for a good price. I would have rated five stars but the metal is thin. Of course you get what you pay for. If you are carefull when installing, using a soft hammer and only striking the reinforced rim, they will provide fine service.
They fit great, hopefully they can withstand a little hard work. I’m Looking forward to shopping again
Just what we ordered.
THANK YOU THEY WERE IN GREAT SHAPE AND MADE IT GREAT TIME
This was the second set of these Wheel Covers that I have ordered. The first set was about 2 years ago and the last set was a year ago. They will not stay attached to the 16 inch steel wheels on my Jayco 5th Wheel. Out of 8 Covers at the current time I have 3 let. Very dissatisfied with them.
The product arrived okay, but apparently the box the product was shipped in got rained on. The box was soaked when UPS delivered it.
Great stainless steel wheel covers. Replaced similar ones perfectly. Best way to improve RV looks. Great bang for your bucks!
They look great and look exactly like the metal version we have. These new ones are plastic with a metal ring of clips inside. We lost one of the old ones and I decided to buy the four pack incase they didn't match or we lost another in the future. Time will tell regarding quality. One advantage to plastic is my original metal covers would dent during install. I plan on installing all four new covers and keeping my old metal ones as back ups.
Look good on the vehicle. They fit well and go on and off without too much trouble. Certainly meets my expectations
Just what we needed! Simple and look gr eat.
Made from decent materials and appear as though will stay in place better than the original wheel covers. Fast shipping, too.
Very fast shipping. Great price. Perfect fit on my Sprinter. What more could you want?
Highly recommended!
Within 1 year all 4 of the hub caps fell off of the vehicle. I had to buy another set.
These are very nice hub caps. They really dressed up my motor home.
always good experience very friendly people
Good quality, looks excellent but a little pricey.
Excellent customer service and product...I'd buy again from this company.
Really good product. Easy install and they will stay on!!
Products are better then I imagined. Super happy.
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lori W.
10/5/2022
The wheel covers are still great, after a whole year!