Replacement Spindle Washer, Castle Nut and Cotter Pin for Dexter Spindle

Question

Question:

I have a dexter 1-1/16inch spindle and need to get new spindle nuts and washers. What is the correct size nut?

asked by: Scott K

0

Expert Reply:

The linked page displays all the trailer spindles we offer and specs including weight capacity and thread diameter. All spindles we offer have a 1-inch-diameter threaded portion that accepts a spindle washer like # SW1000 and a castle nut like # 165686. For a cotter pin you can use # 165649.

expert reply by: Adam R

0

Answer 1

What you're most likely seeing when the back end is lifting up as you set up your Fastway E2 #FA92-00-0450 is not really lifting the rear of the vehicle; it's actually the weight being taken off of the rear axle on your 2017 Subaru Outback.…

view full answer...

Answer 2

Installing a trailer hitch like the Draw-Tite hitch, #75662, will not void your warranty on your 2011 Dodge Ram 1500. Consumers of aftermarket products are protected by the Federal Magnusson - Moss Warranty Act. The Act states that if something…

view full answer...

Answer 3

For your Shurflo 2088-422-444 water pump on your camper the water pump part #LC689052 has the same output and psi rating as well.

view full answer...

Answer 4

The Rampage Wireless Backup Camera #RA7710 that you referenced is a great option for a wireless camera, since it has the magnetic base it can be mounted in a variety of places around your vehicle or trailer. My contact at Rampage said that you can…

view full answer...

Answer 5

We do have exactly what you need, as the SOA567X020 are for some Subarus and are the same as the Thule AeroBlade crossbars. So for the replacement endcaps you will need the following (depending on the one you are missing): - Driver's Side:…

view full answer...

Answer 6

A lot of people use trailer hitches to carry bike racks or cargo carriers which is why we offer trailer hitches for vehicles like your 2019 Volkswagen Golf Alltrack like the Draw Tite part #24949. When you install an aftermarket part on your vehicle…

view full answer...

Answer 7

I wish we had a solution that I could provide for you, but all of the roof racks we offer are designed to fit 2003 Astro van's with raised roof rails. Are you sure you have a totally naked roof? Most likely you have a roof that has raised side…

view full answer...

Answer 8

I am sure that with enough trimming you could find a way to be able to reinstall the fascia door of your 2015 Chevy Traverse, but Draw Tite recommends it just simply get removed and not reinstalled when installing the #75528. The Curt hitch #13424…

view full answer...

Answer 9

What you could use is the part #P23507VP. This is normally used for winterizing water tanks but if you wanted to instead pump fresh water in from a container it would work the exact same.

view full answer...

Answer 10

In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running. How much the capacity would be diminished by pulling 90 degrees to the side will…

view full answer...

Answer 11

I reached out to my contact at Thule and she said for the SSD round side rails on your 2018 Subaru Impreza the Thule Evo Raised Rail Roof Rack that consists of #TH711420 for the two 53 inch WingBar Crossbars in Black or #TH711400 for Silver and…

view full answer...

Answer 12

I reached out to my contact at DeeZee and they verified that the thickness of the walls on DeeZee Truck Bed Tool Boxes #DZ67, #DZ70, and #DZ79 are .090". This is the heaviest duty thickest aluminum that they use. The DeeZee Specialty Series…

view full answer...

Replacement Spindle Washer, Castle Nut and Cotter Pin for Dexter Spindle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching