Recommended Castle Nut for Dexter Trailer Axle Beam # T3584F-EZ-8974
Question:
Looking to see if I can purchase just the castle nut, castle nut washer and castle nut locking nut for the following trailer axle number Item # T3584F-EZ-8974. Thanks,
asked by: Houston S
0
Expert Reply:
The spindle on your Dexter Trailer Axle Beam # T3584F-EZ-8974 will use a 1 inch castle nut with 14 threads per inch like the TruRyde # 165686. Then for a washer you can use # SW1000 and for the cotter pin you will need # 165649.
expert reply by:
Chris R
0
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure a Trailer Axle
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Do 3,500 lb Trailer Axles and 5,200 lb Axles Use Same Hub/Drums and Brake Assemblies
- Q&A: Wiring Diagram for Trailer Breakaway Kit
- Q&A: Does the Pipe Mount BDPG9810-00 and Trailer Jack TJDP-7000S-B Have Same Pipe Dimensions