Replacement Galvanized Trailer Idler Hub For a Continental EC39 Boat Trailer
Question:
Good afternoon, I was wondering if someone could help me out in choosing the correct galvanized, 5 bolt hub assembly for a Continental EC39-900 small boat trailer. The axle weight rating is 1150 lbs. I am not sure of the bearing numbers or seal size. Thanks a lot
asked by: Eddie S
Expert Reply:
Your Continental EC-39 Boat Trailer will need a Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K. I was able to confirm with Continental that you have a spindle that uses 1.063" bearings on a straight spindle with a 1.249" ID grease seal. You will need to replace the grease seal that comes with the kit with a Double Lip Grease Seal # 34823.
If your Cotter Pin # 165649, Washer # SW1000, or Spindle Nut # 165686 are damaged or missing we have those items available for replacement as well.
Since your spindle is not an EZ lube design you can add the Bearing Buddy # BB1980A-SS so that you can easily add grease to your hub to fill the chamber. The stainless steel construction ensures that it will last and the Auto Check feature helps to prevent you from damaging the grease seal on the hub.
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Spare Tire Recommendation for a Dual Jet Ski Trailer with 205 x 65 x 10 Load Range E Tires
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Q&A: Troubleshooting Factory Trailer Wiring that has No Power
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement