Replacement Dexter Hub with 5 on 4-3/4 inch Bolt Pattern and Inner Race L68111
Question:
My single axle trailer hub looks like a Dexter. 5 lug and measures 4.75 inches from stud center to stud center, the only identifiable number I’d the inner bearing race L68111. I have to. Replace the hub, bearings, seal and D washer
asked by: Shawn
0
Expert Reply:
Based on the info you listed the correct replacement Dexter hub is the part # 84546UC3 that you referenced. This comes with the bearings and seal you need as well. The D-washer you'd need is the part # 5-23 and you'd be set.
expert reply by:
Jameson C
0
Products Referenced in This Question
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: How Many Assemblies Come with Dexter Electric Trailer Brake Kit 23-26-27
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Hub & Drum With Electric Brakes Replacement For AL-KO 8700 Hub
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)