Replacement Washer for an EZ Lube Trailer Spindle
Question:
i have e-z lube spindles on my trailer, there was nothing keeping the nut from backing off, what do i need?? i have pictures to send. Spindle at end is 22.6mm
asked by: Warren C
Expert Reply:
EZ lube spindles generally use a tang washer to prevent the castle nut from turning. There are different sizes available depending on what is needed. For example, # 5-101 has an inner diameter of 1 inch. Washer # 5-71 has a different design and a 1-1/2 inch inner diameter. Washer # 5-59 is similar but larger with a 1-3/4 inch inner diameter.
Sometimes you will see a D-shaped opening on an EZ spindle washer such as # 5-23. On this one the distance from the straight edge to the furthest edge of the rounded part is 0.88 inches which equates to 22.6mm.
And finally, sometimes there is a nut retainer such as # 6-190. This model fits nut # 6-191 which fits a threaded spindle that is 1 inch in diameter with 14 threads per inch typically found on 2,000 to 8,000 pound EZ lube axles.
Products Referenced in This Question
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- 1-3/4 Inch Diameter
- 10000 - 15000 lbs
- Washers
- Dexter
more information >
Tang Replacement Spindle Washer
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1-1/2 Inch I.D.
- Redline
more information >
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
Replacement Trailer Spindle Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut
- 1 Inch I.D.
- Redline
more information >
Product Page this Question was Asked From
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Continue Researching
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: D Washer for EZ Lube Spindles
- Video: Redline Trailer Spindles 5-71 Review
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Video: Review of Redline Replacement Nut Retainer For 6-191 Jam Nut 6-190 - 6-190
- Video: Review of Dexter Type B Tang Washer - 5-59
- Search Results: rg06~020
- Search Results: axle washer
- Search Results: d washer
- Shop: Grease Seals (pair)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Spindle Nut 1"
- Shop: Tang Replacement Spindle Washer
- Search Results: rg04~010
- Shop: Replacement Spindle Nut for Dexter Nev-R-Lube Hub and Drum Assemblies - Qty 1
- Shop: Dexter Tang Washer - Type B
- Search Results: spindle washer
- Search Results: 5~101
- Q&A: Can You Convert an EZ Lube Spindle To The Dexter Style Retainer System K71-622-0?
- Q&A: Replacement D Tang Spindle Washer for E-Z Lube Spindle on 3500-lb Axle
- Q&A: D Washer Replacement Needed for a Spindle
- Q&A: 1in D Washer Recommendation for 1 Inch Diameter Spindle
- Q&A: Correct Replacement Spindle Washer for Dexter 3,500LB Axle
- Q&A: My Axle Has No Cotter Pin Hole Can I Install Bearing Kit for #84 Spindle?
- Q&A: Replacement Spindle Castle Nut and D Washer for a Trailer
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Trailer Wiring