How to Choose Replacement Spindle Washers
Question:
Where would I find spindle ID ## to find out what washers I need .my used 4 lug axle did not have any washers .all the vidios I watched have one or two washers
asked by: Jason
Expert Reply:
You can identify the correct D-washer for your spindles by confirming the axle capacity on the axle's identification sticker or plate.
If you have a 3500-lb to 5200-lb axle (or a regular duty 6000-lb axle) you can use # 5-23. If your axle is rated for 6000-lbs (heavy duty), 7000-lbs or 8000-lbs or is a pre-1989 9000-lb axle) you can use part # 5-57. If you have E-Z Lube spindles you can use tang washer # 5-101.
All of these have a 1-inch inner diameter.
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
D Washer for Spindle, 6K-8K Axles - Qty 1
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- Redline
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: grease seals
- Search Results: referral code
- Search Results: 58846
- Search Results: grease cap
- Search Results: dust cap
- Search Results: grease seal
- Video: Review of DeeMaxx Ceramic Brake Pads With Steel Back Plates 3500 - 6000 LBS Caliper - DE38VR
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: DeeMaxx Single Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Will These Grease Caps part # RG04-010 Fit my Dexter Axle
- Q&A: Grease Cap Plug for Trailer Hub Dust Cover
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Search Results: 2 hrcm 10 dac
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Video: Review of DeeMaxx Trailer Brakes - 3.5K 10 Inch Maxx Coat Disc Brake Assembly - DE89YR
- Video: Review of DeeMaxx Trailer Brakes - 3.5K Slip-On Rotor Disc Brake Kit - DE42FR
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Q&A: Parts Needed to Install Electric Brakes On a Tandem Axle Trailer With 3,500 Torque Axles Salt Water
- Q&A: Replacement D Tang Spindle Washer for E-Z Lube Spindle on 3500-lb Axle
- Q&A: Replacement Spindle Castle Nut and D Washer for a Trailer
- Q&A: Replacement 7,000 lb Surge Brake Actuator for Drum or Disc Brakes
- Video: Redline Trailer Brakes 6-17 Review
- Video: Kodiak Trailer Brakes KCMB10HRD Review
- Video: Review of TruRyde D Washer For EZ Lube Spindles - 5-23
- Article: Testing Trailer Brake Magnets for Proper Function