Is There A Plug And Play Brake Controller Adapter From Tekonsha For A 2024 GMC Sierra 2500HD
Question:
My vehicle is a 2024 GMC Sierra 2500HD. My trailer has electric over hydraulic brakes. I have successfully used a Prodigy P2 on previous 2015 Silerrado 2500HD. 1. Does the 2024 GMC have a factory installed harness that I can connect to? 2. What wiring harness do I need with the P2? 3. Is there any under the hood connection? 4. Will I have to run a wire to the back of the truck? Thank you.
asked by: Tom K
Expert Reply:
We have just the thing. You can use the adapter # 3064-P to connect your Prodigy P2 # 90885 to the factory brake control harness. Assuming that your 2024 GMC 2500HD does already have a factory 7 way trailer plug on the back, you will have a connector under the dash that you can plug right in to. Simply mount the controller, plug in and you are good to go. You will not have to run any additional wires. We do carry a replacement mounting bracket # P7685 if you are in need.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Replacement Mounting Bracket for Tekonsha Prodigy and P2
- Accessories and Parts
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: Best Brake Controller for a 2006 Chevy Silverado 2500HD
- Q&A: Tekonsha P2 vs P3 Brake Controller Recommendation for 2013 GMC Yukon