Signal Booster / Repeater for TST TPMS

See what our Experts say about this TST Accessories and Parts

• Will The Display For the TST TPMS Kit Show Tire Pressure and Temperature While Driving?
  The TST TPMS for RVs # TST-507-RV-4-C in normal operation will scroll through each tire one by one and display the information on that specific tire for 5-6 seconds. You can still manually scroll by using the + and - buttons and it will display the tire information for 10 seconds before resuming to cycle again. When you have an alert you will hear an audible alarm and the tire with the issue will begin to flash with the tire information displayed on the screen. You will be able to pause...
  view full answer...
• Where to place the Signal Booster for TPMS Sensors on 24 FT Gooseneck Aluminum Trailer?
  The Signal Booster # TST-507-R in the TST TPMS for RVs - Color Display Kit # TST-507-FT-4-C should be mounted on the front of your 24 ft gooseneck trailer. It can be mounted on the outside of the trailer as it is waterproof. You can mount it so as the light is visible when driving so that you can see that it is getting power. The booster can be mounted to either the battery or wired in on the 7-way so that it will receive 12 volt power when you need them to operate. If you wire it to...
  view full answer...
• Operating Frequency Of The Signal Booster/Repeater For TST TPMS
  The operating frequency of the Signal Booster / Repeater for TST TPMS # TST-507-R is 433.92 MHz.
  view full answer...
• Can TST TPMS 433.92 MHz Signal Booster Work with 2024 Chevy Silverado TPMS 433 MHz System
  According to my research the TST Signal Booster / Repeater # TST-507-R won't work. People have tried different aftermarket solutions but none of them have been able to communicate with the OEM TPMS on the newer GM trucks as of yet. I read that GM is in the process of making one but we both know to take that kind of news with a grain of salt and not to hold our breath. If you'd like more of an immediate solution then I recommend picking up a whole TST TPMS System # TST-507-FT-4-C. This...
  view full answer...
• Are Additional Repeaters Needed to Use TST Tire Pressure Monitoring System on Multiple Trailers
  Because the repeater is meant to be installed on the trailer itself and is hardwired into a 12-v power supply, the easiest thing to do would be to install additional repeaters, part # TST-507-R on each individual trailer. You could, however swap the repeater back and forth if you wish.
  view full answer...
• Recommended Tire Pressure Monitor and Flow Through Sensors For Fleet
  The TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors # TST-507-FT-4-C will allow you to monitor up to 38 tires on the single monitor. For your additional sensors you can simply use # TST-507-FT-S2 and then you can use # TST-507-R for each vehicle or trailer. If you want multiple monitors you can use the Color Monitor for TST TPMS Systems # TST-507-D-C.
  view full answer...
• Does Signal Booster for TST TPMS Come With Inline Fuse
  I reached out to the manufacturer, TST, about the Signal Booster for TST TPMS # TST-507-R, who told me the following: 1) The repeater does come with an inline fuse on the positive (red) wire. 2) All current repeaters do come with ring terminals. 3) When mounting the booster inside (such as in a bay) you can use any SPST (Single Pole Single Throw) switch. For this I recommend the Pollak Heavy-Duty Toggle Switch - SPST- On-Off # PK34212. The booster can be added to or used as a replacement...
  view full answer...
• Replacement Tire Sensors and Signal Booster For TST 507 Tire Pressure Monitoring System
  As you have the Monitor # TST-507-D-C you will simply need the Signal Booster # TST-507-R to go along with some new tire sensors. You do have the option of what sensors you will prefer to use from the list below. Brass Tire Sensors for TST TPMS - Qty 2 # TST-507-RV-S2 Brass Tire Sensors for TST TPMS - Qty 4 # TST-507-RV-S4 Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2 Internal Tire Sensor for TST TPMS Systems - Qty 1 # TST-507-INT-S1 These are the only sensors and quantities...
  view full answer...
• What Tire Pressure Sensor Kits Does Signal Booster for TST TPMS Use
  The only brand of tire pressure sensors the Signal Booster for TST TPMS # TST-507-R can work with is TST. This will boost the signal for the following sensor kits: # TST-507-RV-4-C, # TST-507-RV-6-C, # TST-507-FT-4-C, and # TST-507-FT-6-C I attached a review video for this signal booster for you to check out as well.
  view full answer...
• Is the Signal Booster / Repeater for TST TPMS Compatible with Factory Trailer TMPS Systems
  The Signal Booster / Repeater for TST TPMS part # TST-507-R is designed for TST tire pressure monitoring systems like part # TST-507-RV-4-C. The repeaters/extenders aren't universal as they don't all use the same frequency. We don't offer systems that can integrate with OEM at this time unfortunately. That said, the TST option above is one of the best on the market, it monitors both pressure and temperature. It can monitor up to 38 tires and works on motorhomes, 5th wheels, motor coaches,...
  view full answer...
• Will The TST TPMS Repeater Work With A Factory Ram TPMS System?
  The TST Signal Booster / Repeater # TST-507-R is designed as a direct replacement for TST TPMS for RVs, 5th wheels, motor coaches, or trailers, like the # TST-507-RV-4-C. If you are referring to a factory Ram system, then this will not work, unfortunately. For something like this, you will need to go directly through Ram for a replacement. However, If you have one of the TST systems installed on your truck, you will need to verify that it is compatible with the # TST-507-R, but odds are...
  view full answer...
• Will The TST TPMS Signal Booster/Repeater Work With The Factory Ram TPMS System?
  I have a solution for you, however the Signal Booster / Repeater for TST TPMS # TST-507-R that you mention is not going to be compatible with your factory TPMS system. If you're referring to the factory RAM system, then you're going to need to go through a dealer for a replacement. If in fact you do have one of the TST systems installed, then you will just need to verify that it is going to be compatible with # TST-507-R, and you'll be good to go. The # TST-507-R is compatible with...
  view full answer...
• Recommended Tire Pressure Monitoring System with 12 Sensors
  The TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors # TST-507-RV-6-C are a great choice for your Class A and trailer. This company actually started out making TPMS for tractor trailers, so these are extremely durable and I really like the color monitor on the system since it's easy to read. Because of the length of the two vehicles I do recommend adding the Signal Booster # TST-507-R. Since the kit comes with 6 sensors you will need 6 more which can be added with #...
  view full answer...
• 10 Sensor Tire Pressure Monitor System with Color Display with Repeaters
  For what you are wanting the best solution is the TST TPMS - Color Display # TST-507-INT-6-C which comes with a color monitor and 6 sensors. Since this can be used with up to 110 sensors you'd just need to add the additional sensors to get to 10. For additional sensors you'd want the part # TST-507-INT-S1 for each one individually and then for signal repeaters you'd want the part # TST-507-R. We do not have a hardwired solution that covers all of the things you need.
  view full answer...
• What Size Fuse Does The TST TPMS Signal Booster / Repeater Use?
  The Signal Booster / Repeater # TST-507-R that comes in the TST TPMS for RVs # TST-507-RV-4-C uses a 2-amp fuse.
  view full answer...
• Can Multiple Signal Boosters be Used for TST Tire Pressure Monitor Systems
  You can use multiple of the Signal Booster # TST-507-R if you think your application warrants it. I reached out to my contact at TST who confirmed this and recommended spreading them out (like one towards the middle and one towards the back for example) so that you get the best reception possible.
  view full answer...
• Radio Frequency Range Of The Tire Monitoring System Flow Through Tire Sensors
  The TST TPMS for RVs - Grayscale Display - Signal Booster - 4 Flow Through Tire Sensors # TST-507-FT-4 can be used on your set up. Range on the sensor can vary depending on the specific environment and conditions at hand. It will be, in the perfect at best conditions, about 60 linear feet. However if you do have signal issues you can rectify those with the Signal Booster / Repeater for TST TPMS Item # TST-507-R. The TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire...
  view full answer...
• TPMS Recommendation for 2 Flow-Through Sensors
  Hey Robin, thanks for reaching out! The best TPMS for your application is the TST TPMS for RVs by using the following numbers: - Color Monitor # TST-507-D-C - Signal Booster / Repeater # TST-507-R - Flow Through Tire Sensors # TST-507-FT-S2 Attached is a review video of these parts put together as a whole kit for your reference.
  view full answer...
• Tire Pressure Sensors Compatible with the TST Tire Pressure Monitoring System
  The Brass Tire Sensors for TST TPMS - Qty 2 # TST-507-RV-S2 and the Signal Booster for TST TPMS # TST-507-R will work well with your current monitor. Many people have done this and the monitor works well with the caps as well as the flow through sensors in whatever combination you desire.
  view full answer...
• Recommended TPMS For Flat Towed 2007 Toyota Tacoma
  For your application I recommend using the TST TPMS for RVs # TST-507-RV-4-C along with the extra Signal Booster # TST-507-R since you have longer a Class A motorhome. This installs as a cap on the valve stems of your 2007 Toyota Tacoma so they won't be very large and noticeable even when you're using the Tacoma as a daily driver. Attached are review videos for you to check out.
  view full answer...
• Purpose of Buttons and Blinking Light of Signal Booster for TST TPMS
  When the light of the # TST-507-R is on solid that means it has power and the sensors are reporting info that it is picking up. It will occasionally blink as it's transmitting info. When you press the button and it's blinking and beeping essentially you are putting it into a pairing mode but this wouldn't be necessary since you are able to get it to hold solid.
  view full answer...

Do you have a question about this Accessories and Part?