Spacer Kit for Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins
(37 reviews)
Price: $42.94
In Stock
Spacer Kit for Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins
Item # RP61301
Our Price: $42.94
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (37)
- Q & A (0)
- Videos (2)
- Photos
Reese Accessories and Parts - RP61301
- Fifth Wheel King Pin
- Sidewinder Parts
- Fabex Pin Box
- Lippert Pin Box
- RBW Pin Box
- Reese
Kit is required for use with Sidewinder rotating turret RP61300 if the pin box on your trailer measures 12-1/2". Pin boxes that meet this criteria include Fabex 500, 503, 520, 530, 560 and 765; Lippert 0115, 1116 and 1716; and RBW 7019 and 7028.
Features:
- Works with rotating turret (RP61300 - sold separately) for 5th Airborne and Sidewinder pin box couplers
- Spacers mount on either side of turret to increase its width so that it can be used with 5th-wheel pin boxes that measure 12-1/2"
- Fits the following pin boxes:
- Fabex 500, 503, 520, 530, 560 and 765
- Lippert 1116, 1716 and 0115
- RBW 7019 and 7028
- Allows Reese Goose Box 5th-wheel-to-gooseneck coupler adapter (RP94622 - sold separately) to fit the following pin boxes:
- Lippert 0115, 1116 and 1716
Note: When used with RP61300 rotating turret, this item replaces ST100 rotating turret for Sidewinder and 5th Airborne pin box couplers.
61301 Fifth Airborne Spacer Kit for Side Winder Rotating Turret
Installation Details
California residents: click here
Video of Spacer Kit for Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Reese Spacer Kit for Rotating Turrets Review
Today, we're going to take a look at and show you how to install the Reese Rotating Turret for the 5th Airborne and Sidewinder 5th Wheel Kingpins. Now, when we use this with part number RP61301, which is the spacer kit, it's an exact replacement for the ST100 rotating turret. In that configuration, it'll fit the Fabex 500, 503, 520, 530, 560, and 765, as well as the Lippert 1116, 1716, 0115, and the RBW7019, and 7028. Now, here's what our turret's going to look like. We're just going to be replacing the existing turret that was on our customer's Airborne Sidewinder here. Basically, what has happened is he's switched to a different camper and this doesn't give him the width we need, so we need to go with one just a little bit wider to make up that spacing.
Nice thing about it, we have several different turrets available. In this case, if like this customer, if you are switching campers, we can just simply get a new turret to put on there to fill up that gap. We don't have to buying the whole Sidewinder kit again. These work really well with the Sidewinder or with the 5th Airborne Sidewinder kits. They're just a replacement. Here, we've got four bolts that we're going to remove.
We have already added on one of our side plates here. Once we have it installed, we'll show you how to add the other one on. It's really straightforward, really simple. With the side plates that we've got here, part number RP61301, this is actually going to turn our turret right into that ST100 that was previously offered. This'll sit right here on the side.
We'll show you how that goes on in a minute. Let's get the turret installed on the Sidewinder. We want to remove the four existing bolts right here on the top. Hang on to them, because we're going to be reusing them. Lift that plate up.
With the plate should come our ring. Our turret kit's going to come with a new ring, so we won't need to hang onto that. Keep that for backup. Grab both sides of the turret, lift straight up on it. See there it's going to slide right off. We'll set this aside. The new turret is going to slide right down on it. This cutout here should be facing toward our truck. We're going to place our ring right down on top. See, that's going to allow it to spin freely there. Our top plate's going to come down on, then we'll snug those bolts down and torque them to the specifications that we'll find in our instructions. Now, for our side plates, simply take the roll pins that are provided. We want the notched side to be facing downward. We'll line up the small holes, see we've got two here in the side plate. There's going to be two in the side of the turret. I'm just going to set our side plates down on a flat surface. Use the roll pins and a hammer, and we'll just tap these in. Once we've got them started there, line them up with out turret. Then, we can just simply knock them on in. We want to make sure those roll pins are flush with the outside edge here. As we slide this in place, our pin box is going to slide down the outside. If those pins we're sticking out at all, they're going to cause it to hang up on us. Let's go ahead, head out and get it installed on the camper. Depending on which pin box we're going into, or which set of brackets we're going into, that's going to vary which hole location that we'll be using now. We're doing the Lippert 1716, so we're going to use hole pattern or configuration B, which is going to be the low hole closer to the middle on the bottom, then the hole closest to the middle on the top. You can see I just used a little white paint marker, kind of marked them. That way, when we get it up in place we'll be able to kind of identify those. We'll be looking through the side plate, so we want to be able to identify that we've got those lined up. Now, let's go ahead and stick it up in there. Now that we've got our holes lined up, we'll take our bolt, we're going to take our provided hardware with the flat washer. Slide it through from the outside. Then, on the backside, we'll have a conical tooth washer. The teeth of that need to face outward towards the side plate. Then, we've got a hex nut that we'll put on there as well. Now, we'll just go through and snug down each one of our bolts, then we can torque them to specification. Now we've mounted our breakaway switch and our junction box back up into place. We're going to keep them mounted on the part that's attached to the camper itself. That way we don't have to worry about our wires being stretched too much. Remember, it's going to pivot here now instead of here on the front. We don't want to attach that stuff up here, because then it's going to be flexing that wire in and out all the time as it turns. With everything back in place and re-secure, that's going to complete today's installation of the Rotating Turret for the 5th Airborne and Sidewinder 5th Wheel Kingpins.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- etrailer mistake
Customer Reviews
Spacer Kit for Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins - RP61301
Average Customer Rating: 4.8 out of 5 stars (37 Customer Reviews)
Kit is required for use with Sidewinder rotating turret RP61300 if the pin box on your trailer measures 12-1/2". Pin boxes that meet this criteria include Fabex 500, 503, 520, 530, 560 and 765; Lippert 0115, 1116 and 1716; and RBW 7019 and 7028.by: Davin06/13/2020
Adequate quality. Had one large burr that had to be filed off before installation. Used to adapt Goosebox to Lippert #1716. I realize that is made to fit many applications, but they really missed an opportunity to strengthen the connection. Recommended position is the lower bolt pattern, but the adapter plate could have been made taller and tied into all nine holes, making the whole assembly stronger. Same for the Goosebox. It just begs for the center two holes on each side to be drilled though and have 12 bolts instead of 8. Just like the OEM mount was.
by: Marlon01/24/2023
It fits great, works great and I haven’t had any problems with it.
by: Kevin T.07/06/2019
Installation went well and can't wait to give it a tug !
Great customer service and fast delivery.
Installed on our 15 Montana 3750FL.
by: Andrew 06/03/2021
Worked as advertised when replacing the stock 5th wheel hitch on my Keystone Raptor toy hauler with a Reese Goose Box.
by: Mark S02/08/2020
Plates work well and fit into the gap between the Lippert factory box and the Reese Goosebox. The crush pins could be easier to install but overall it worked well.
by: Paul 01/15/2021
Good quality spacer kit and easy to install. The only reason I didn’t give it 5 stars is the lack of holes you are able to use. I know Reese only calls for 4 bolts per side, but I would prefer 6 per side. Etrailer is always quick on shipment and easy to deal with.
by: Craig11/21/2020
The spacers work great once installed. I had trouble keeping the spacers in place while mounting. They kept falling off the roll pins. Ended up wrapping electrical tape around the spacer and the hitch to hold it while mounting.
by: Dean06/03/2022
This product is exactly what I was looking for and thanks to “etrailer” they assisted me in getting the right product for my specific application. Thank you all for your help and great customer service and support over the many years.
by: Justin05/09/2016
I needed this to go with the goosebox I purchased, it worked great and was easy to install.
by: Jay04/18/2018
Tiffany was wonderful, I needed some trailer parts in a hurry. She stayed in contact, letting me know that the parts where available for pick up and made sure that they were shipped ASAP, the parts were delivered quicker then I requested.
Thank you Tiffany
by: Techn009/26/2020
Spacer plates look good but unfortunately there were no roll pins in the package. Slightly disappointed as they are necessary to hold them in place while installing the new pin box.
by: Dale 02/11/2023
Great customer service and fast delivery. Thanks Jessica for your help.
by: Travis 02/23/2023
Thanks, great service
by: Russ K11/06/2013
Received quickly, packaged very well and exactly as described! Instructions are clearly written and illustrated so there is no guesswork at all.
by: Shane01/29/2018
Fills the gap. Non adjustable.
by: Reggie S.09/26/2017
Exactly what I was looking for. Thank you etrailer!
by: Christopher04/09/2021
Nice quality. Fits perfectly. I really like the ease of installing and removing it. The cost seems to match the quality.
by: James P.12/12/2017
Received everything as ordered and installed it with help.
It works great, hitch, etc.
by: Chris M06/25/2021
Fit very snug, which is what you want a spacer to do.
by: Sue03/16/2022
I haven't installed it yet, but everything looks good. Delivery was very fast.
by: Brad S05/23/2020
Best decision I have made!
by: WL02/18/2022
Worked like a champ!
by: Mark03/22/2022
What I needed and decent price
by: Leo10/15/2018
Have not installed yet but it was delivered quickly and looks a feels of a high quality piece.
by: Scott 09/19/2020
Spacers worked as advertised. No issues. Delivery was quick. Received before date initially stated.
25
37
Show More Reviews
See what our Experts say about this Reese Accessories and Parts
- Correct Reese Goose Box Air Ride Coupler Adapter for a 2020 Keystone Fuzion 373The 2020 Keystone Fuzion 373 uses a Lippert 1116. The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part # RP85FR is compatible with a Lippert 1116 when using the Spacer Kit part # RP61301.
view full answer...
- Will Reese Goosebox fit 2014 Grand Design Momentum 355THIn order to find if the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs # RP85FR fits your 2014 Grand Design Momentum 355TH you will need to identify your current pin box. Since it sounds like there is nothing on your pin box to identify it there are two options. The first is to find the VIN and contact the manufacturer so that they can cross-reference what your pin box number is. If they don't have this information then the only other...
view full answer... - Fifth Wheel to Gooseneck Adapter Recommendation for Trailer with Lippert Pin Box 240258I checked with Lippert and they informed me that the pin box on your trailer is a Lippert 1716 which we do have a really great gooseneck adapter that fits but the Gen-Y you mentioned only fits the 1621 style. So what I'd recommend instead is the Reese Goose Box part # RP85FR with the spacer kit part # RP61301 and you'd have a 20k rated, cushioned pin box adapter that unlike any other option similar wouldn't void the warranty of the trailer frame. This uses an air bag and shock kit to provide...
view full answer... - Determining if Spacers Are Needed to Install Reese Goose Box on Trailer FrameIf the pin box bracket width on your trailer (where the pin box normally fits into) measures 12-1/2 inches then you'd need to use the adapter part # RP61301 with the part # RP85FR. If instead it measures 12 inches no adapter would be needed. While you are out there measuring it though you should also check out the help article I attached that covers how to measure a pin box to determine it's model so that you can verify for sure what you need.
view full answer... - How to Choose Replacement Pin Box for 5th Wheel RVYou'll need to check the number on the side of your pin box. There will be a sticker on the box that will have a number like the popular 1621. Once you know the number you can choose the correct Goose Box from the following: 16K Lippert 0115, 1116 and 1716 Pin Boxes - # RP94716-61301 20K Lippert 1621, 1621HD, and 0719 Pin Boxes (1716 box with Spacer Kit # RP61301) - # RP85FR
view full answer... - Is A Gooseneck Conversion Worth It?I think that the Gooseneck conversion would give you slightly more maneuverability when dealing with uneven surfaces when hooking and unhooking and it has fewer parts that might need to be replaced eventually. You will also have a "free" or "clean" bed when not in use. You wont have to remove a bulky 5th wheel auto-slide hitch. You will loose some cab clearance if you replace your slider and may not be able to make some of the sharper turns. I would recommend The Gen-Y Hitch Shock Absorbing...
view full answer... - How To Find Correct Reese Goosebox for a Dutchman Voltage 5th WheelThe Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part # RP85FR is designed for Lippert 1621, 1621HD, and 0719 pin boxes. The Spacer Kit part # RP61301 would then make it compatible with the Lippert 1716 pin box. If you are unsure of which model pin box you have, you'll need to reach out to Lippert with the serial or model number on the white sticker of the fifth wheel wings/brackets.
view full answer... - Lippert 1116 Pin Box Reese Goose Box Replacement with 20k CapacityFor a 20k Reese Goose Box to replace your Lippert 1116 you'd need the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP85FR with the spacer kit # RP61301 and you'd be set.
view full answer... - Correct Air Bags and Compressor Kit with Tank for my 2005 Ford F-350The correct air bags for your 2005 Ford F-350 2WD are the Firestone Ride-Rite Air Helper Springs part # F2398. Then add the Air Lift QuickShot Compressor System for Air Springs - Support Line and Reserve Tank part # AL25572 to fulfill your needs. As far as the 7.5" measurement you are asking about it is in fact the measurement from the center of the ball to the leading edge of the pin box.
view full answer... - Reese Goose Box Pin Box Replacement for Keystone Avalanche 5th Wheel TrailerThe Reese Goose Box Pin Box replacement will not void the manufacturer's warranty. The Goose Box is an air ride box to absorb shock as well as reduce jarring and chucking. We have a few different options, however the Lippert number you gave is not a pin box number. That is not a problem because we do have measurements that can be taken to assist in determining that pin box replacement. I've attached an article to assist with this. We have the # RP85FR which is a confirmed fit for...
view full answer... - Reese Goose Box Fit for 20k on Attitude 34CRSGBecause the bolt patterns differ, the Reese Goose Box needed will vary depend on which OEM pin box your 5th wheel is equipped with. Your pin box should have an ID plate or label on it somewhere listing the manufacturer and model number of the pin box, or perhaps a manufacturer and a serial number. I'll need this information, as I have no way to look up which pin box your 5th wheel rolled out of the factory with. Lippert is the most commonly found pin box manufacturer, I'll provide a listing...
view full answer... - Will This Reese Goosebox Be Compatible With A Lippert 1116 Pin Box Rated For 19,000lbs?The Reese Goosebox # RP85FR is compatible with your pin box when you use the spacer kit # RP61301. I have also linked all the possible pin boxes compatible with your Lippert 1116 pin box with a 19,000 lb rating and gooseneck hitches to 5th wheel trailer adapters.
view full answer... - Which Reese Goose Box Fifth Wheel Adapter Fits 2017 Keystone Montana 3950bhThe Goose Box your 2017 Keystone Montana 3950bh needs is the 20k part # RP85FR with the spacer part # RP61301. Since your fifth wheel trailer has a GVWR of 16,885 lbs you have to go with the 20k version of the Goose Box and the spacer to fit the wider frame of the 1116.
view full answer... - Will 20k Reese Goose Box Mount in Same Kingpin Bolt Holes for Bed Rail ClearanceThanks for the kind words, and the answer to your question is yes, the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - 20,000 lbs # RP85FR will mount in the same kingpin bolt holes. In fact, it has a pair of mounting options, and I have added cut outs from the linked installation instructions of the lowest mounting positions for you. I also added an image of the dimensions of the Goose Box for you to use as a reference. The Reese Goose Box # RP94720 will work as a replacement...
view full answer...
- Will The Spacer Kit # RP61301 Allow For Reese Goosebox 94720 To Fit Lippert 1116 Pin Box? Yes, the Spacer Kit # RP61301 will allow you to connect your Reese Goosebox 94720 to the mounting arms for a 1116 pin box.
view full answer... - Recommended Reese Goose Box With 19000lb+ Rating To Replace Lippert 1116 Pin BoxThere sure is! To replace the Lippert 1116 Pin Box with a 19000lb Rating on your trailer you will need to use the Reese Goose Box # RP85FR that has a 20000lb rating, and spacer kit # RP61301. I included videos of the products mentioned for you to take a look at.
view full answer... - Reese Goose Box for 2017 Fuzion Toy Hauler with MorRyde RPB72-1116 Pin BoxFor the Reese Goose Box that will work perfectly to replace the existing MorRyde RPB72-1116 model on your Fuzion Toy Hauler I recommend the Reese # RP85FR along with the Spacer Kit # RP61301 (which is what allows it to fit the Lippert 1116 wing brackets). This will bolt right up to the pin box brackets on your trailer, features a robust 20,000 pound weight capacity, and will allow you to easily tow your toy hauler with the gooseneck ball in your truck without voiding any warranties. I...
view full answer... - Can I Convert the Reese Sidewinder # RP16420 to a # RP61412 Sidewinder by using a Spacer KitI spoke with my contact at Reece and he confirmed that the Sidewinder Fifth Wheel King Pins with Rotating Turrets # RP34FR and # RP61412 both come with the Rotating Turret # RP61300. By adding Spacer Kit # RP61301 to # RP34FR you will not end up with the same product as the # RP61412 because the latter has an air shock integrated and the former is rated for higher weight capacity.
view full answer... - Pin Boxes Compatible with Reese Rotating Turret for 5th Airborne and SidewinderThe Rotating Turret for 5th Airborne and Sidewinder 5th Wheel King Pins # RP61300 fits the following pin boxes: -Fabex 663 and 665 -Lippert Components 1621, 1621HD, and 0719 -M&M 663 and 665 If you add the spacer kit # RP61301 then it also will fit the following: -Fabex 500, 503, 520, 530, 560 and 765 -Lippert 1116, 1716 and 0115 -RBW 7019 and 7028
view full answer... - Will Reese Goose Box Resolve Severe Chucking When Towing Fifth WheelIf you are experience excessive chucking the Reese Goose Box # RP94716-61301 is a great option because it has both an air bag and shock absorbers and is designed to heavily reduce the amount of back and forth shock (chucking) as well as up and down shock you are currently experiencing. It also completely removes one of the other factors that could be coming into play, which is a hitch with a loose jaw system or a worn-down king pin. Either (or both) of these things could be a factor...
view full answer... - Reese Goosebox 5th Wheel Trailer Coupler for 2008 Glendale 25E30 5th WheelThe Reese Goosebox 5th wheel adapters are the very best way to allow towing a 5th wheel trailer with a gooseneck hitch. They add no extra stress to the trailer frame and are endorsed by Lippert which makes most of the RV frames in the industry. These Air-Ride couplers also give you a smoother ride than a standard pin box. We offer three versions of the Reese Goosebox and each one replaces certain specific OEM pin boxes. Here are the items and the standard 5th wheel pin boxes they replace: 20K...
view full answer... - Holes Used For Reese Goose Box With Spacer For Lippert 1116 Pin BoxThank you for purchasing from etrailer the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP94716-61301. Though I'm not 100 percent sure what you are referring to by "the bracket bolt up to the 1115 Lippert bracket and the spacers" I believe this is just the bolt holes used for both the Goose Box and the spacer kit. I have added cut outs from the instructions for both the Goose Box and spacer kit which shows the bolt holes used. The instructions say "Lippert 1716" but...
view full answer...
- Correct Reese Goose Box for Lippert 1716 Model Pin Box on TrailerThe correct Reese Goose Box to replace the factory Lippert 1716 model on your Cedar Creek Trailer is the part # RP94716-61301, This is essentially the Reese # RP85FR Goose Box that you were looking at but with an added spacer kit to make it compatible with the Lippert 1716 brackets and bolt pattern. The spacer kit is also available separately with part # RP61301. I do understand the confusion over the different part numbers out there. The 94622 model that you referenced also seeing is...
view full answer... - Hardware Included with Reese Turret for 5th Airborne and Sidewinder # RP61300-01The Reese Turret for 5th Airborne and Sidewinder 5th Wheel King Pins # RP61300-01 does include the necessary hardware and spacer kit for installation to the factory side brackets on your trailer, but it doesn't actually include those side brackets (if that's what you're referring to). Those should be welded to the frame of your trailer and isn't something that we have available. Now if you are referring to the spacer kit plates that make this rotating turret compatible with Fabex 500,...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Andrew K
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Video Edited:
Dustin K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.