PVC Grommet for Peterson 2-1/2" Round Clearance and Side Marker Lights - Flush Mount - Black

Video Transcript for Review of Peterson - Trailer Lights - 142-18

Today we're going to take a look at the grommet for Peterson 142, 143, 162, 163, and 172 series lights in black. This is going to be a nice addition to your trailer, sort of finish the look of your light and also give it a little bit of shock protection, so you don't have to worry about your light being damaged. It's going to give it just a little bit of extra cushion there.It does have a recessed mount design, and it will fit into a three-inch diameter mounting hole. I've got one of the 142-series lights. As you can see, that just pops into place. Sort of finishes the look of that, sits nicely inside, and still allows us to get our wiring connection made at the back.

Now the light and the wiring for our light, those are all going to be sold separately, but you can find them right here at etrailer.com to get wired up and lighting your trailer.AS far as our dimensions for our grommet, it's going to be about three and three-quarters of an inch in diameter going from the outside edge to outside edge. And then it will be about an inch in depth. Again, it does require a three-inch hole for that installation at the back. It's made of a PVC construction in black. And this product is made in USA.

And that's going to do it for our look at the grommet for Peterson 142, 143, 162, 163, and 172 series trailer lights.