Is There a Replacement Bevel Gear Kit for Lippert Ground Control 2.0 Front Landing Gear

Question:

I have the Lippert Ground Control 2.0 - 4 point assembly installed on my 2017 Open Range Roamer 371MBH by Highland Ridge. The front landing gear operate separately and do not have a drive shaft connected between them. In this configuration, is there still a Lead Leg and a Follow Leg or are they both the same? Both front landing gear will not extend or retract. I removed the front left landing gear from the coach and found both bevel gears severely worn and missing teeth. I am wondering if I need two of the same repair kits, # LC146059 or do I need one of each, the LC146059 and LC146060? Any assistance would be greatly appreciated.

asked by: Jason H

Expert Reply:

I spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually doesn't have a replacement bevel gear kit so unfortunately you will need to replace both legs.

For the standard landing gear you would need part # LC241846 if the outer black tube on your current gear measures 29-1/2". If the outer black tube measures 33-1/2" you would use part # LC241845 instead.

expert reply by: Jon G