Screw - Self-Tapping Phillips Head - 8-18" x 3/4"

See what our Experts say about this Flint Hill Goods Accessories and Parts

• How Should the Thinline Trailer Reflectors with Adhesive Backing Be Installed
  Yes. It's not uncommon that over time, adhesives are affected by heat, humidity and exposure to the sun and UV rays; the Thinline Trailer Reflectors - Adhesive Backing - Screw Mount - Rectangle - Amber - Qty 2 # RE15AK aren't immune to this, unfortunately. However, when installing these I typically don't recommend relying only on the adhesive backing and that you also use a self tapping screw like the Screw - Self-Tapping Phillips Head - 8 x 3/4" # 1131832 to keep them firmly attached to...
  view full answer...
  
• Comparing Trailer Horse Pad Screws and Self-Taping Screws for Horse Trailer Side Pads
  The Trailer Horse Pad Screw part # PS-8 will work great for attaching Horse Trailer Side Pads like part # HTP60BK. That said, you may need to drill a small pilot hole into the backing first depending on the material. I suppose you could use a standard self-tapping screw like part # 1131832 as well but there is no built-in washer on these and you risk stripping the hole much easier this way as well.
  view full answer...
• How To Mount the LED Trailer Clearance or Side Marker Light MCL32AB
  The Self-Tapping Phillips Head Screw part # 1131832 can be used to secure the LED Trailer Clearance or Side Marker Light part # MCL32AB. This light will require two screws per side. If you also need wiring connectors we have those as well, the Deka Heat Shrink Butt Connector part # DW05743-5.
  view full answer...
• Does the Hot-Line LED Third Brake Light Come With Mounting Hardware
  The Hot-Line LED Third Brake Light for Trailers part # 328-003-84R does not come with mounting hardware but all you will need for this is two screws, part # 1131832.
  view full answer...
• Hardware Needed For LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen
  The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 92" Wide Item # 3441409200PBK just requires some self tapping screws like Screw - Self-Tapping Phillips Head - 8 x 3/4" Item # 1131832.
  view full answer...
• Can the Horse Trailer Breast Pad Be Attached Directly to Metal
  The Horse Trailer Breast Pad part # HTP24BK could easily be attached to a metal divider using self tapping screws like part # 1131832. I would agree that generally speaking the breast pads are attached to plywood but I don't see an issue attaching them to metal either.
  view full answer...
• Replacement Trailer Clearance Lights for Bargman 99 Series
  The correct replacement trailer clearance light for a Bargman 99 Series is the Optronics Trailer Clearance or Side Marker Light part # MC44RB for red or part # MC44AB or amber. The mounting holes for this light are spaced 3" apart on center. It features a simple two wire installation, one for power and one for ground. In order to remove the old lights it would be easiest to just drill out the rivets with a small drill bit. The drilled holes would then make good pilots for the self tapping...
  view full answer...
• How To Mount the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector Part # MCL31AB
  The Optronics LED Clearance or Side Marker Light w/ Reflex Reflector part # MCL31AB mounts by running two screws like part # 1131832 though the base. In order to access these screw holes you will need to remove the lens. I have attached a photo that shows the screw holes. I have also attached an install video for you as well. In order to make the wiring connections you will also need part # DW05714 and part # DW05737-1.
  view full answer...
  
• Does the Plunger and Nylon Socket Door Holder DH605 Come with Install Hardware
  The Plunger and Nylon Socket Door Holder part # DH605 does not come with installation hardware but we do have screws that will work for this, the part # 1131832.
  view full answer...
• What Hardware Is Needed To Install the Thinline LED Trailer Clearance or Side Marker Light MCL67AB
  The Thinline LED Trailer Clearance or Side Marker Light part # MCL67AB is a surface mount light that has two mounting holes which you will see once the lens is removed. In order to mount this you can use pretty much any self tapping-screw like the Self-Tapping Phillips Head Screw part # 1131832. The Self-Tapping Phillips Head Screw could be used to mount most of our trailer side marker/clearance lights.
  view full answer...
• What Size Screw Is Needed for the Bargman Trailer Light 30-68-510
  The Bargman Trailer Clearance or Side Marker Light 30-68-510 or Optronics Trailer Clearance or Side Marker Light part # MC48RB do not come with mounting screws therefore there is not an exact size recommend for this. That said, the screw will just need to be small enough to fit in the hole and long enough to secure both the lens and base. I really wish I had an exact size for you but the Self-Tapping Phillips Head part # 1131832 should work.
  view full answer...
• Can a License Plate Be Mounted to the etrailer Cargo Carrier
  I don't see any reason that you couldn't mount a license plate somewhere on the Curt Cargo Carrrier # C18100, but there aren't any parts that are specifically for this. Because of the shape of the bars on the carrier, your best bet would likely be just using some zip ties to secure the plate to the carrier. If you wanted to wire in a license plate bracket with a light you could use the Optronics LED Trailer License Plate Light with Bracket - Submersible - 5 Diodes - Clear Lens # LPL56CB....
  view full answer...
• Installation of UWS Truck Bed Tool Chest UWS01044 in 2018 Sierra Denali 2500 HD
  The UWS Truck Bed Tool Chest # UWS01044 does require you to drill and use your own hardware to secure it in your truck bed. The choice of hardware is up to you; you could use screws, nuts and bolts or even u-bolts like # CE15252A if you prefer. Your spray-on liner will not be an issue for installation. Dimensions are shown in the linked diagram. This USA-made tool chest features 8 cubic feet of internal volume and its corrosion-resistant aluminum construction and foam-reinforced lid mean...
  view full answer...
  
• Replacement for Reflect-O-Lite 400
  The Reflect-O-Lite line has been discontinued for quite some time so replacements are no longer available. However, the Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB is a very similar option that will work well in its place. In regards to installation, all you will need to do is mount the base with a screws part # 1131832 and then match up the wires with butt connectors part # DW05744-5.
  view full answer...
• What Size Screw Is Needed To Install the Optronics LED License Plate Light Part # LPL59CB
  The two mounting holes on the Optronics LED License Plate Light part # LPL59CB are .2" diameter which means you can use the Self-Tapping Phillips Head Screw part # 1131832 to attach them to your trailer. In order to make the wiring connections you can use the Deka Heat Shrink Butt Connectors part # DW05744-5. This will be everything that you need to install the light for the exception of a phillips head screwdriver and pair of pliers.
  view full answer...
• Access Door Measurement for Compatibility With 2017 Jayco Precept 31UL Motorhome
  The Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - Chrome # UF48-979010 has overall dimensions that are 8 inches wide by 7 inches tall. The best thing you can do is look at the attached diagram of screw center locations to see how they match up to your 2017 Jayco Precept motorhome. If the holes don't match up but are a larger pattern, then you will be able to install the cover with self tapping screws like # 1131832 into the side of your motorhome.
  view full answer...
  
• Recommended Door Holder for Fender Mounting
  The Plastic Stem and Rubber Socket Door Holder - 2" Long Stem # DH39R can be installed onto your fender if desired to allow your door to be secured open. You can alternatively use a Hook and Keeper for Enclosed Trailer Door # 383400 in another location like mounted to the fender to give you a similar option. There is not an option we carry that is long enough to allow connection to the main trailer wall when the fender is making contact with the door.
  view full answer...
• RV Slide-Out Topper Mounting Hardware
  The Replacement Mounting Hardware for Lippert Solera Slide Topper - Black # LC701665 will help you get the parts you are missing.
  view full answer...
• Mounting Hardware for Optronics Mounting Bracket
  The Optronics Mounting Bracket # A91CB grounds through the mounting hardware. So whatever hardware you use, whether screws or pop rivets, make sure it's made of a conductive metal. The hardware we generally recommend is self-tapping screws # 1131832 but pop rivets should work just fine.
  view full answer...
• How to Install Side Marker Light
  To install a side marker light like the Optronics # AL82AB on your 2014 Malibu you will need to ground the white wire and then connect the black wire to your running light circuit. This then installs on the mounting bracket # A91BOB which you will need install using something like a self-tapping screw # 1131832. Sometimes the lights ground via the mounting hardware so if that's the type of light you have you need to make sure that you mount it to a clean, bare-metal surface. Attached...
  view full answer...
  
• Will LED Clearance Light Work With One Wire
  Yes, the Thinline LED Clearance and Side Marker Light - Submersible # AL91AB will work with your single power wire, as it uses a 2-wire (one for power, one for ground) pigtail or 1-wire pigtail with a self-grounding bracket. To mount this light you have a couple options. The first is the Mounting Bracket # A91BOB with Right Angle 2-Wire Pigtail # A46PB; you'd also want to use the Self-Tapping Screw # 1131832. Your other option to mount this light is to use Self-Grounding Mounting Bracket...
  view full answer...
  
• Wiring Configuration for Trailer Side Marker Lights
  The usual configuration for 4-pole trailer wiring has the WHITE wire as GROUND, the BROWN wire as RUNNING LIGHTS, the YELLOW wire as LEFT TURN/STOP and the GREEN wire as RIGHT TURN/STOP. If your light has white and brown wires coming out of it then typically the brown wire would connect to the + side of the running light circuit and the white wire would ground to the trailer frame, or could be run up to the trailer plug's ground. One way or the other the light must have a ground and a +...
  view full answer...
• Is Mounting Hardware Included with the Jensen Double DIN RV Stereo
  This is correct; since the Jensen RV Stereo # JWM45 is designed to be mounted in different manners, mounting hardware is not included. You'll want to use mounting hardware appropriate for your mounting method, so if you're mounting it in a cabinet you'd just need some wood screws.
  view full answer...
• Which Replacement Bulbs for Optronics CB22AB Triangle Truck Clearance and Cab Marker Light
  The Truck Clearance and Cab Marker Light - Incandescent - Triangle - Amber Lens # CB22AB uses the Replacement Side Marker Light Bulb # 194 # A194B. These do not have specific mounting hardware that is used, but some stainless steel self-tapping screws like the # 1131832 would work.
  view full answer...

Do you have a question about this Accessories and Part?