Derale Transmission Line Compression Fitting Kit - 1/2" Line to 1/2" NPT Barb

See what our Experts say about this Derale Accessories and Parts

• Recommended Transmission Cooler For 2019 RAV4
  The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient # D13501 is the most popular universal-fit transmission cooler for various vehicles and should fit your 2019 Toyota RAV4. This cooler measure 11" wide, 5-3/4" tall, and 7/8" deep. To confirm if this will work on your vehicle for sure you will need to measure the space between your grille and radiator and compare to the cooler's dimensions. This transmission cooler works with 5/16" lines. If your...
  view full answer...
• Transmission Cooler for 2003 Toyota Tundra with 4.7L Engine
  Transmission coolers are not vehicle specific items, so the idea is to choose the largest, most efficient cooler that will fit in the space available. The best and most efficient place to mount a transmission cooler is directly behind the grille in front of the radiator and A/C condenser. If the space available will accommodate its 11 x 11-3/8 inch dimensions, the Derale # D13614 would be an excellent choice. The fittings needed will depend on the diameter of your transmission lines. For...
  view full answer...
• Radiator Fan For 1998 Dodge Durango
  Since fans are not vehicle specific, choosing a fan for your 1998 Dodge Durango will depend on a couple of things. For your 5.9 liter engine, the normal CFM requirement is between 3400 and 4500, so you will want to get the largest fan possible that meets your engine cooling requirement. You will want to make certain you have sufficient room to install the fan. I have linked you to our product page that has several fans, and also shows the dimensions for the fans. I have also linked you...
  view full answer...
• Transmission Cooler Recommendation for a 2006 Chrysler Pacifica
  A transmission cooler is always a good idea if you are towing. Overheating is one of the biggest causes for transmission failure because your transmission relies on the transmission fluid to stay cool. The added stress from towing a trailer on the engine and transmission will cause the transmission fluid to heat up more than normal. It is a good idea to get the largest transmission cooler possible because transmission fluid cannot be cooled too much, however, you will be limited by the...
  view full answer...
• Transmission and Engine Oil Cooler Recommendation for a 2012 Dodge Grand Caravan
  If you were looking for a transmission cooler for your 2012 Dodge Grand Caravan, then I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler, # D13502, that you referenced. This transmission cooler is rated for up to 6,000 lbs and the ideal installation location is in front of the AC condenser or radiator. The installation process could take some time for someone who does not have experience installing aftermarket coolers in vehicles. For those who are mechanically inclined,...
  view full answer...
• Transmission Cooler Recommendation for a 2011 Chevrolet Traverse
  For your 2011 Chevrolet Traverse, I would recommend installing the Derale Series 8000 Plate-Fin Transmission Cooler, # D13503. The main difference between this transmission cooler and # D13303 is the design. The plate-fin design is more efficient that the tube-fin design because they force fluid between much smaller plates that agitate the fluid. The fluid leaving the plate-fin style is cooler because the smaller, flatter plates allow more fluid to contact the aluminum surface inside the...
  view full answer...
• Transmission Cooler Installation Tips for a 1994 Mercury Grand Marquis LS
  The Derale Series 8000 Plate-Fin Transmission Cooler Kit, # D13503, would be a great choice for your 1994 Mercury Grand Marquis, as long as there is room in front of the radiator and ac condenser for the cooler to mount. Measure to be sure before purchasing, but most likely you will have plenty of room. The best tip I can give is to do some research on your vehicle. Check the radiator fittings and see if there are NPT (national pipe thread) fittings or Inverted flare fittings. Your vehicle...
  view full answer...
  
• Transmission Cooler Recommendation for a 2004 Chevrolet Silverado 4.8L Towing a Travel Trailer
  The Derale Series 8000 Plate-Fin Transmission Cooler, # D13504, would work great on your 2004 Chevrolet Silverado 4.8L when towing your 6,000 lb travel trailer. This transmission cooler has an efficient plate-fin design allowing you to use a smaller size transmission cooler without sacrificing performance. This cooler does include a hose and universal adapter fitting, but if you would like a vehicle specific fitting you can use the Derale Snap-In Adapter Fitting for GM, # D13035, and...
  view full answer...
• Does the Derale Series 8000 Kit # D13503 Come with Everything Needed to Install on a 2010 Tundra
  The Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13503, that you referenced, comes with everything you will need to install it on your 2010 Toyota Tundra. You will simply need to cut the 4 foot hose in half (or whatever lengths you need) that comes with and connect one to your transmission cooler and the other to the return line. I have attached the installation instructions for you to check out. If you think you will need more than 4 feet of extra hose then you can also order...
  view full answer...
  
• Fittings for a Transmission Cooler for a 2016 Volvo V60 Polestar
  Since we haven't had the chance to install a transmission cooler on a 2016 Volvo V60 Polestar yet I am not sure what kind of fitting that your transmission cooler uses. What you can do to ensure that it fits a transmission cooler is cut the fitting off of your hose, measure your hose diameter, and then choose a compression fitting that matches the diameter of your hose. We have one for a 3/8" Line # D13032, a 5/16" Line # D13031, and a 1/2" Line # D13033. You can then filter through our...
  view full answer...
• Recommended Transmission Line Adapter for Derale Plate-Fin Cooler on a 2007 Dodge Ram Turbo Diesel
  I spoke to my Derale contact and he informed me that if your vehicles current lines are steel or aluminum you will need a compression fitting adapter like # D13033 for the # D13502 Plate-Fin Transmission Cooler. You would need to find out what size line you have and choose the corresponding adapter. 1/2 inch line uses the # D13033. For 3/8 inch line you will want the # D13032 and for 5/16 inch line you will need the # D13031. The cost will be listed with each product. I have linked...
  view full answer...
• Parts Needed to Tow a Small Travel Trailer with a 1996 Toyota Tacoma
  The towing capacity of your 1996 Toyota Tacoma will depend on if your truck has a V6 or a 4 cylinder and if it is a 4X4 or a 4X2. I have listed the towing capacities of the different options for the Toyota Tacoma below. 4X4 V6 - 8,300 lbs 4X4 4 Cyl. - 7,400 lbs 4X2 V6 - 8,300 lbs 4X2 4 Cyl. - 3,500 lbs You can verify the towing capacity of your truck by checking your owners manual or contacting a local Toyota dealer with your vehicle identification number. Toyota also places a few restrictions...
  view full answer...
• How to Tap into Transmission Fluid Return Line on a 2012 Ford Expedition for a Transmission Cooler
  The line that you will need to tap into is the transmission fluid return line. The easiest way to determine the return line on your 2012 Ford Expedition transmission is to start the truck, shift into drive but do not go anywhere. After about 15 seconds or so put the truck back in park and apply the emergency brake. Turn off the truck. Out of the 2 hoses attached to the transmission, one should be warmer than the other. The one that is cooler is the return line. You can use radiator adapter...
  view full answer...
• Suitability of Derale Transmission Cooler, Part # D13503, for 2010 Toyota Rav4 Limited V6
  Transmission coolers are not vehicle-specific, so you are free to select any one that will fit into the available space in front of your air conditioning condenser. In the world of coolers bigger is better. The particular Derale cooler you reviewed, the Derale Series 8000 Plate-Fin Class III, part # D13503, is a substantial unit that measures 11 x 8-3/4 x 7/8 inches. This will do an excellent job of cooling your Rav4 transmission. It includes the Derale Insta-Dapt radiator adapter that...
  view full answer...
• Can a Transmission Cooler be Used to Bypass the Radiator on a 32ft Motor Home
  I verified with my contact at Derale that the Derale Hyper-Cool Transmission Cooler, # D15960, will work to bypass your radiator and cool your transmission fluid. One important thing to consider when installing a transmission cooler is the size of your transmission lines. If the diameter of your transmission lines are 1/2 inch in diameter, then you will want to go with the transmission cooler that you referenced. If your transmission lines are 3/8 inch in diameter, then you will want the...
  view full answer...
• Recommended Supplementary Transmission Cooler for 2009 GMC Yukon XL 32-Foot Travel Trailer
  Transmission fluid cannot be over-cooled and you are making a good investment in the long-term care for your 2009 GMC Yukon XL Denali by adding a supplementary transmission cooler for your summer towing to further cool your transmission over and above the cooling provided by the external cooler you already have. When it comes to transmission coolers, I recommend choosing the largest transmission cooler that will fit into the available space. The ideal place to install a transmission cooler...
  view full answer...
• Derale Combination Transmission and Engine Oil Cooler Installation on a 2007 Chevrolet Suburban
  The Combination Engine Oil and Transmission Cooler you purchased, # D15902, will work great on your 2007 Suburban, provided that there is 2 inches of clearance below the OEM oil filter for installation of the sandwich adapter and installation and removal of the filter and there is room for the oil cooler hose to be routed when the sandwich adapter is installed. Lets break the installation down to engine oil cooler and transmission oil cooler separately since the combo you purchased is...
  view full answer...
• Transmission Cooler Recommendation for a 2006 Pontiac Vibe AWD with a 1.8L Engine
  Transmission coolers are not vehicle specific, however to optimize efficiency you would want to use the largest transmission cooler available, and mount in the optimal place on your vehicle. The most efficient mounting position is considered to be between the grille and the AC condenser core. Considering the space that is available for you to mount a transmission cooler is most likely limited on your 2006 Pontiac Vibe I recommend either the Derale 9000 Plate and Fin Transmission Cooler...
  view full answer...
  
• 1/2 Inch Hose Barb Fitting to Install Transmission Cooler on a 2005 Ford Expedition
  We have a 1/2 inch compression fitting to go from 1/2 inch line to 1/2 inch NPT barb # D13033. I would actually have the flow go from the transmission, to the factory cooler in the radiator, then from there to the other cooler, and then to the Derale cooler before going back to the transmission. This is the normal way to install a supplemental cooler (at the end of the line). The fitting we have listed for the 2005 Ford Expedition is # D13025 which are 5/8 inch inverted flare fittings.
  view full answer...
• Transmission Cooler Recommendation for a 2009 Yukon XL SLT 5.3 Towing an 8000 lb Camper
  When it comes to transmission coolers, I recommend choosing the largest transmission cooler that will fit into the available space. The ideal place to install a transmission cooler is directly behind the grill, in front of the radiator and A/C condenser. I would recommend measuring the available space so you know what size cooler to look at. For your 2009 GMC Yukon XL SLT with the 5.3 liter engine, I would recommend using the Derale Transmission Cooler, # D13504. This is a class IV cooler...
  view full answer...
• Transmission Line Fitting Recommendation for 1984 Chevrolet Silverado 454 Turbo
  The Derale Radiator Adapter Fittings, # D13018, covers 1987 - 2007 Chevy trucks so I can not guaranty that this would work for you. Instead you can use a universal fitting like part # D13031 for 5/16 inch line, # D13032 for 3/8 inch line, or # D13033 for 1/2 inch line. You will just need to take a quick measurement of the line on your 1984 Chevrolet Silverado 454 Turbo to determine which one you will need.
  view full answer...
• Recommended Compression Fittings For Dodge Durango 2011 Citadel 5.7L Transmission Cooler
  The insta-dapt comes with all of the Derale kits. It is unfortunately not always a fit as it is a universal adapter. You have a couple options, you can flare the lines you have or I recommend using compression fittings. To ensure you choose the correct compression fitting for your vehicle, you will want to measure the diameter of your transmission lines. The most common size is 3/8 inches, but it would be safe to measure first. I have attached links to the compression fittings that we...
  view full answer...
• Adapters For Transmission Cooler Lines On 2003 4.2 Inline 6 Chevy Trailblazer
  For your 2003 4.2 I6 Chevy Trailblazer with 4L60 automatic transmission, I recommend the Derale Snap-In Radiator Adapter Fitting for GM # D13035 to connect to your radiator and use a hose. For your other adapters, you will need to measure each line. We have compression fittings for most sizes. Based on other Chevy vehicles, you may need the Derale Transmission Line Compression Fitting Kit - 1/2" Line to 1/2" NPT Barb # D13033, the Derale Transmission Line Compression Fitting Kit -...
  view full answer...
• Need 1/2 Inch Fitting to Install Derale Transmission Cooler in 1993 Dodge W250
  The 1/2 inch fitting you'll need to install the Derale # D13960 is # D13033
  view full answer...

Do you have a question about this Accessories and Part?