Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads

See what our Experts say about this Derale Accessories and Parts

• Oil Filter Relocation Kit for a Mercruiser 4.3LX Motor
  Based on the filter numbers you have provided I was able to determine that the threaded part of the motor is 18mm x 1.5mm where the filter installs. But it indicates that it is a special 18mm x 1.5mm. I do not know what that means; whether the threads are reverse threaded or something else. I can tell you that the oil filter relocation kits install on regular threads and none designed for alternative thread styles. The STP filter just indicates M18x1.5 thd. so that appears to be normal. I...
  view full answer...
• Oil Filter Relocation Kit for 1991 Geo Metro
  The Bosch 3330 filter uses a 3/4-16 thread. For a filter relocation kit, I'd recommend part # D15715 from Derale. The threads on the spin-on adapter that attaches to the filter landing and the remote mount are both 3/4-16, so this kit would work perfectly for you. The kit includes the spin-on adapter, the remote mount, the 1/2 NPT fittings, hose clamps and 10 feet of 1/2 inch ID hose.
  view full answer...
• Oil Filter Landing Spin on Adapter Kit Needed for a GM MK IV Big Block Chevrolet Motor
  It sounds like you have a Chevrolet big block engine, 1972 or earlier. If your engine uses the PH13 Fram oil filter then the thread size is 13/16-16 and you would need to use the Derale Premium Spin-On Adapter Kit with 13/16-16 Engine Filter Threads, # D35705. The kit you referenced # D35703, would mount on a filter landing that normally uses the PH8A Fram oil filter. If you are unsure of the oil filter that your particular engine uses, you can use the Derale Premium Spin-On Adapter Kit...
  view full answer...
• How To Install An Oil Filter Relocation Kit On a 1997 Chevrolet Camaro
  The Derale Premium Spin-On Adapter Kit part # D35703 is only part of an engine oil filter relocation kit. This particular part installs on the engine block and the threads then lead to hoses which attach to the part that the oil filter installs on in a location of your choosing. If you need the whole kit then you would want to use the Derale Oil Filter Relocation Kit part # D15748 which will work with your 1997 Chevrolet Camaro. I have attached a photo of the above kit installed to give...
  view full answer...
  
• Recommendation for an Oil Filter Sandwich Apater for a 2011 Jeep Wrangler with 3.8 Liter Engine
  I spoke with my contact at Derale and he stated that there are 2 options for an oil filter sandwich adapter for your 2011 Jeep Wrangler with a 3.8 liter. First, you can use Derale Thermostatic Sandwich Adapter Kit, # D15730. This is a Thermostatic type of adapter that allows oil cooler than 180 degrees to bypass the heat exchanger. The other options is Derale Non-Thermostatic Sandwich Adapter Kit, # D15735. This kit actually comes with several size fittings to fit different engines. You...
  view full answer...
• Thermostatic or Non-Thermostatic Engine Oil Cooler Sandwich Adapter for a 2004 Nissan Titan
  The Thermostatic Sandwich Adapter, # D15732, has a thermostat that opens when the engine oil temperature rises above 180 degrees, and will then allow engine oil to flow through the cooler and back to the engine. Until 180 degrees is reached the adapter allows the oil filter on the vehicle to function normally and engine oil is not routed through the cooler. A non thermostatic adapter, like # D15735, will allow oil to flow to the cooler at all times, even when the engine is cold. The only...
  view full answer...
• Will the Derale Spin-On Remote Oil Filter Adapter Work on a 1964 Ford Interceptor Y block 312 CID
  The Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads, item # D35703, is designed to replace the adapter that goes on the engine block filter landing. My reference guide only goes back to 1965 but I am confident that the 3/4-16 threads will work on your 1964 Ford motors. 312 CID translates to 5.1 Liters which is most likely what they now call the 5.0 liter Ford engine. Along with the spin on adapter you will need the Derale 1/2 inch NPT Male x 1/2 inch Barb Straight Hose...
  view full answer...

Do you have a question about this Accessories and Part?