Quick Fist Riser - Qty 2

Video Transcript for Review of Quick Fist Tie Down Straps - QF40050

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at these QUICK FIST Risers for the QUICK FIST Clamps. It is for quantity of two risers. Now, these 1-inch risers are made of a glass infused nylon material. They are guaranteed against breakage for life.

Now, these risers will lift a QUICK FIST Clamp away from a wall or deck. Provides a 1-inch lift when you go to install your clamp. These are designed to work with the original QUICK FIST Clamps, the MINI QUICK FIST Clamps, the SUPER QUICK FIST Clamps or the 3-Inch QUICK FIST Clamps. Few measurements on this. Overall length is right at 6 inches long, width on it, it's right at 7/8 inches, and the overall height is 1 inch.

It does have the three mounting holes in it.Basically, just to show you, I happened to pull a. Here is a original QUICK FIST Clamp. You can see with the two holes, and it's designed to mount onto your wall. Basically, when you go to install this.. Let me back out a little bit here.

When you install this onto your wall like that, put whatever item you're in there, and it holds it in place, this clamp does. But by chance, if you didn't want it up against the wall, the item you wanted to grab would sit too close, you can use one of these risers. You just put that behind there, the mounting holes, and then you install your clamp with the riser install, and then it'll give you room to grab your item without it being up against the wall that close. But that should do it for the review on these QUICK FIST Risers for the QUICK FIST Clamps, for a quantity of two risers..