Camco RV Heating Wall Thermostat

Video Transcript for Camco RV Air Conditioners CAM09231 Review

Speaker 1: Today, we're going to be taking a look at the Camco RV Heating Wall Thermostat. Now this thermostat is going to provide you with the connections to run your heat in your RV. Now this only is going to work for heat, it doesn't work with air condition as well, so keep that in mind. We pop open the cover and give you a better look at the internal components there. This is also how you would mount this up. You're going to have two small holes that you can run your screws through to attach this to the wall.

It does come with two self-tapping screws to get this mounted, it's a Philips head on the one end. Those screws are about an inch long.To attach the cover, you'll just want to ease it over the two bottom pegs there and then just lift it and snap it into place. Temperature range goes from off, and at the lowest to 50 to 90 degrees fahrenheit. It also has the actual temperature readout at the bottom. It does come with a cover for a wall plate, this is optional, you can use it if you want to.

It just mounts right behind our thermostat and it kind of sits inside the recessed edge there. The two holes on the sides are going to matchup with the two mounting holes on our thermostat as well.It does come with instructions on how to wire this up. And as far as the dimensions on our thermostat, it's going to be about 2-3/4" wide by 3-3/8" long. Not counting the adjustment there, that would make it about 3-1/2" at its height and the width is going to be about 1-1/4". The adaptor plate is going to be about 5" wide by 5-5/8" long and it's just about 1/8" deep.

That's going to do it for our look at the Camco RV Heating Wall Thermostat.