Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These quick release pull pins are designed to allow for easy and fast adjustment to your landing gear legs. They are easier to remove than standard landing gear pins with their spring-loading action, even after being exposed to the elements.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Lippert Quick Release Pull Pins for your fifth wheel landing gear. It is for a quantity of two pull pins. Now these are quick release pull pins which are designed to allow for easy and fast adjustments to your landing gear legs. They are designed as you can see to fit the two and a quarter inch square tube landing gear legs and just to show you how they look when they're installed, I'm gonna pop up an insert, there you can see the landing gear leg with these installed and all you have to do is pull this pin like that to release it, adjust the height of your leg and then once you find the correct height, let it slide back through there and it's all held into place. The spring is all right in here.
This three eight inch diameter pin here will fit into the seven sixteenths sized hole that's on your landing gear legs. Now, standard fifth wheel landing gear legs come with pull pins that can be pretty difficult to take out especially after they've been introduced to the harsh elements and these here are easier to remove than your standing landing gear pins because of the spring loaded action right in here. They have this spring so it even works after being exposed to the elements. So you just pull this like that and it releases, it adjusts the height of your leg, release your pin back in there to hold it into place. By simply pulling this lever, these quick release pull pins will easily go in and out with no hassle and the other nice feature you have to remember is there's no loss of the pins 'cause these pins stay attached.
Your factory ones, you'll pull the pin out and they'll be loose, you can set them aside and it end up losing them. These ones stay attached. It does include the two pull pins here for two landing gear legs. You can see they are a nice bright zinc plated finish. So these are designed to allow your RV fifth wheel owners to quickly raise and lower your landing gear to the desired height that they need.
But that should do it for the review on the Lippert Quick Release Pull Pins for your fifth wheel landing gear.
Average Customer Rating: 4.8 out of 5 stars (72 Customer Reviews)
These quick release pull pins are designed to allow for easy and fast adjustment to your landing gear legs. They are easier to remove than standard landing gear pins with their spring-loading action, even after being exposed to the elements.Asking for review before I have had a chance to install them. They look and feel better than what came with the unit. Won't have a chance to install them until April 2024 but should do just fine.
Install these quick release pins this morning. They are really great. These new pins go all the way to the other side you can actually see them. These are 100 percent better then factory installed ones.
replacement was as easy as 1 2 3 finished.Website was the best.
they work as good as or better than ol.
Works great! One year old and still functioning perfectly. Easy to install also.
After a year and a half we found that one of the two OEM front landing gear spring loaded locking pins on our 5th wheel RV was difficult to pull and eventually started to fall apart.
We ordered a new one from etrailer.com and it has worked easily and properly ever since.
We are fully pleased.
These make setting up our 5th wheel much easier, as the pins just need to be pulled to engage the landing gear. Also, they can't be stolen, which can happen with the removable pins. Yup, people will steal your pins while parked. It's happened, though not to us. These bolt on and are secure.
Bought replacement gear box for my Venture M-9000 landing gear motor part # LG-179015. This was my first experience with etailer and I was impressed with the Q&A
That helped me diagnose the problem to recommending the the part and number.
The videos and reviews helped me to decide that this was a project I could do and what tricks and problems others encountered. The project took about 2-1/2 hours and the only problems I had was the screw that came with the spacer, stripped as I was putting it in and I had to file the burrs off the shaft. The landing gear works and jacks retract and extend. I still have clicking or knocking sound coming from that area and the motor sounds very labored. Any ideas?
We seem to be particularly hard on these pins. This is our second set. Thank you etrailer for always having the parts we need.
I have a Jayco North Point trailer and these were an exact replacement. The original factory pins were damaged by my error. These were very easy to install. I now keep a spare set just in case.
Haven't had any issues with these landing gear products. Shipping was on time and not damaged. Easy installation videos were very helpful, and grease zerts are handy. Quick release pins working great. I recommend these products.
These pins are awesome. We bought a 5th wheel and some somehow took the pins off and replaced them with bolts. I picked up some pins at a local RV dealer and they were not quality pins. Went to etrailer.com and purchased these easybto install high quality pins and in minutes we were back in action. Tgese quick release pins are easy to use and install. Thanks again etrailer.com for helping us out.
As always, anything I order from etrailer is as advertised. This product works well and easy to replace.
Wayne S.
10/25/2018
Still working well. I love doing business with this company. They care about their customer. Ill continue to do business with them. And again, this product is working well after one year of use.
I have had these spring pins before, and they work great. Thank you, e trailer for the great service
Dennis G.
6/4/2020
Excellent, no problems
Great product, came on time as promised. The quick release 5th wheel pull pins are much easier to work than the old pins. It's great because I have a bad back and they're easier to use.
I needed to replace one of the pins on my 5th wheel's front landing gear. These were direct replacements and the cost was right. I replaced the bent pin and now have a spare for the cost of one factory replacement.
I bought these quick release pins along with a new landing jack. I haven't installed them yet, but they appear to be exact replacements for the slightly damaged jack on one side of my 5th wheel. Shipped quickly and I received them within about 5 days from order.
Travel days are a little easier with the Quick Releases on the 5th wheel.
Proper item got here quickly as usual. etrailer is always a great company to deal with.
Malcolm H.
2/16/2019
Fit properly and works fine. Etrailer is always a great company to deal with.
As always, a great experience dealing with etrailer. Product works great and was delivered the next day.
Steve
7/5/2020
Still working just great. Much better than factory pins.
Steve
7/5/2020
Still working just great. Much better than factory pins.
Steve
7/5/2020
Still working just great. Much better than factory pins.
Steve
7/5/2020
Still working just great. Much better than factory pins.
Steve
7/5/2020
Still working just great. Much better than factory pins.
Just like original that came on rv. Fits like a glove. I couldn't be more pleased with the shipping. These were out of stock and Mike at E-trailer assured me they would get them to me as soon as possible. We'll just 7 days after placing my order they were on my porch. Great job.
Work as expected. Easy replacement. Good quality material.
Paul
4/15/2022
1 Year later and still preforming. Were full timers and are always traveling. Works great
I have not attached the parts yet but looks as what I would expect. The only issue was finding the correct part on the web site as the part to fit my 2.25" landing gear had this dimension was berried in the description. It would be nice to have it in the title description.
Excellent replacement
Michael
7/8/2021
Works just fine. Just make sure you have the pin pushed all the way through
Everything Terri N has dealt with with us has always been excellent.
Perfect fit exact replacement easy inst all
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Julie
4/13/2023
These work great! Easy to install and did just what I needed them to do.