Is It Optional To Install The Adapter Base Plate With The Camco RV Heating Wall Thermostat?

Question

Question:

Can you mount the thermosat without the face plate

asked by: Sal

1

Helpful Expert Reply:

The Camco RV Heating Wall Thermostat # CAM09231 can be mounted with our without the base plate adapter.

expert reply by: Bryce D

1

Adapter Plate Installation Instructions
(click to enlarge)

Answer 1

The Reese #RP69FR weight distribution shank uses the industry standard bolt hole diameter and spacing. The holes are 3/4 of an inch in diameter and spaced 1-1/4 inch apart on center. I've provided a photo, showing these and other key dimensions…

view full answer...

Answer 2

We have the perfect replacement weight distribution shank for you! The Curt Weight Distribution Shank #C17122 is 18 inches long and from center of pin hole to center of bolt hole is 14 inches. The shank has a weight capacity up to 15,000 pounds and a…

view full answer...

Answer 3

I would be happy to help! First the Curt MV Weight Distribution Hitch #C17050 you were looking at would be a bit stiff with the 440lb tongue weight you mentioned for your 16' Airstream, but is that figure what Airstream lists as the tongue…

view full answer...

Answer 4

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...

Answer 5

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Sorry, John. We do not have any Rhino-Rack keys for the lock code 290. Typically the best route to go is changing all your Rhino-Rack lock cores to their more premium keys so you can have all your accessories keyed alike as well. Here is a list of…

view full answer...

Answer 8

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Answer 9

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

view full answer...

Answer 10

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 11

Those do not but I checked with Blue Ox and found a set that will. For your 2021 Chevy Silverado 1500 you will need the Blue Ox Base Plate Kit item #BLU54VR. The Blue Ox Base Plate Kit item #BLU24TR you were looking at fits the 2022 and 2023 Chevy…

view full answer...

Answer 12

Yes, you absolutely can use the SumoSprings Solo Custom Helper Springs Item #SSR-307-47 with a weight distribution system. Those springs were designed for exactly the type of issue you are encountering. These will keep your 2019 Ram 1500 Classic…

view full answer...

Is It Optional To Install The Adapter Base Plate With The Camco RV Heating Wall Thermostat?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching