Replacement Shank for Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 20,000 lbs

See what our Experts say about this CURT Accessories and Parts

• What Double Ball Setup Will fit the Curt Adjustable Channel part # C45917
  A BulletProof hitch double ball setup will not fit in the channel of the Curt shank part # C45917 the distance between the holes and the pin diameter doesn't match. You'd need to stick with a Curt ball setup part # C45912 instead.
  view full answer...
• Parts Needed for 20k Adjustable Channel Mount Curt Ball Mount
  The parts you mentioned do work together and would give you and adjustable pintle channel mount ball mount. You would want part numbers # C45922, # C45917, and # c45925 .
  view full answer...
• Will Ball Mount Portion of Curt # C45901 Fit Shank # C45917
  I checked with Curt and the shank part # C45917 would fit the ball mount portion of the # C45901 that you referenced.
  view full answer...
• Comparing Pintle Hook and Gooseneck for Towing With 2015 Ram 2500
  A pintle hook combo like the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 and a gooseneck are very different applications and generally aren't comparable because they require such different applications and configurations for both your trailer and truck. Assuming you have a truck that is set up for both, a gooseneck application will absolutely be the way to go because it will be a more cost-effective option and will give you better ride quality when towing. You didn't state your...
  view full answer...
• Inner Width of Channel of Curt Adjustable Ball Mount part # C45901
  The inner channel width of the Curt Adjustable ball mount part # C45901 and it's replacement shank part # C45917 is 3 inches and the outer width is 3-3/4 inches.
  view full answer...
• Is Demco Trailer Coupler # DM12113-95 Compatible with Curt Shank # C45917
  While they haven't been officially tested for use together, the Demco Trailer Coupler # DM12113-95 that you referenced will physically work with the Curt Replacement Adjustable Shank # C45917. The coupler will fit within the shank's 3 inch wide channel and the bolt hole spacing on the coupler (2 inches apart on center) is compatible with the 1 inch spacing on the shank. I have attached a couple of short video reviews that you can check out as well.
  view full answer...
• Replacement Channel Mount Ball Platform for 20K 3 Inch Wide Adjustable Curt Shank
  The internal channel width of the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 is 3" while the Replacement Ball Platform # C28KR you're looking at has a 2-3/4" width and is for the Curt Rebellion XD rated only for 15K as opposed to the 20K rating for your shank. Since there will be a 1/4" difference I recommend going with the Curt Pintle Hook # C45922 instead which has the higher rating to match your shank plus it comes with a 2-5/16" hitch ball that can be swapped out for...
  view full answer...
• Recommended Shank to Fit With Dexter 2-Tang Clevis
  The Dexter 2-Tang Clevis # T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches # MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount. So while the holes line up, the Clevis requires slightly larger pins so it's going to have some play. While this will technically work, the larger pin holes mean they can get elongated over time so I recommend using the Replacement Shank for Curt Adjustable...
  view full answer...
• Can Anti-Rattle Rubber Insert be Used for 20K Curt Adjustable Shank for 2-1/2 inch Hitch Receiver
  Yes it will! The Rubber Bumper # C45921 is a direct replacement for the Curt Adjustable Ball Mount # C45900 but the only differences between the shank that comes with that system and the Replacement Shank # C45917 that you referenced is the weight capacity and the size of the shank that fits into the hitch receiver. The ball mount kit # C45902 that the larger shank is a replacement for does come with an anti-rattle bolt that installs in one of those holes at the back-side but we have a...
  view full answer...
  
• Is Replacement Shank Available for Curt Adjustable 2-Ball Channel Mount with 10-3/8" Drop
  The Replacement Shank # C45917 is for the Curt Adjustable 2-Ball Channel Mount # C45902 which has a 5-1/4" rise/6" drop. I reached out to Curt and my contact said that at this time (July 2020) there is no replacement shank for the Curt Adjustable 2-Ball Channel Mount # C45927 so you'll have to pick up the entire ball mount to use this shank.
  view full answer...
• Determining If Curt Pintle Hook Will Work With Curt Adjustable Ball Mount
  As long as your Curt Channel Ball Mount is 3" wide with adjustment holes 2" apart on center the Curt Pintle Hook with 2-5/16" Hitch Ball - Channel Mount - 20,000 lbs # C45922 you were looking at will fit perfectly. If this does not match your ball mount then you can use the Replacement Shank for Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 20,000 lbs # C45917 if your tow vehicle has a 2-1/2" trailer hitch, or the # C45900 if your tow vehicle has a 2" trailer hitch receiver. If you can...
  view full answer...
• Does The Curt Replacement Shank C45917 Include The Anti-Rattle Bolt?
  Though the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 does not include the anti-rattle bolt, we do have it available separately. For this, you will need the Replacement Anti-Rattle Set Screw with Wrench for Curt Channel Style Adjustable Ball Mount # C45916.
  view full answer...
• Adjustable 20,000 lb Ball Mount Option with Silver Colored Hitch Ball
  I have a possible solution for you, but Curt does not offer a silver two ball attachment for the Curt Adjustable Ball Mount # C45902. One possible solution for you is the Fastway E Series HD Adjustable 18K Ball Mount # FA42-00-2625. A nice feature about the Fastway ball mount is the corrosion resistant aluminum construction. This will be good if you are in a cold climate with salt on the roads. A hitch lock is also available for this ball mount, # FA86-00-3685. If you don't need both...
  view full answer...

Do you have a question about this Accessories and Part?