Recommended Shank to Fit With Dexter 2-Tang Clevis

Question

Question:

will this clevis fit a bulletproof hitch like the model md254? It looks identical to the Bulletproof clevis model 358clevis minus all the pins and the powder coat paint.

asked by: Martin L

1

Helpful Expert Reply:

The Dexter 2-Tang Clevis # T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches # MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount. So while the holes line up, the Clevis requires slightly larger pins so it's going to have some play.

While this will technically work, the larger pin holes mean they can get elongated over time so I recommend using the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 instead since it's designed for heavy duty applications.

expert reply by: Jon G

1

Answer 1

The Timbren #TDR3500CA Aeon springs are a fit for your truck. According to Timbren, there was a manufacturing run that had weld spatter on the threads, but this was an isolated incident that occurred some time ago. The problem has been taken care…

view full answer...

Answer 2

For your 2019 Ram 3500 single rear wheel the correct fitting Timbren kit is part #TDR3500CA that you referenced. Timbren has confirmed for us that this does fit your truck. It fits a few years of the Ram trucks which might be why you've…

view full answer...

Answer 3

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just…

view full answer...

Answer 4

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

view full answer...

Answer 5

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…

view full answer...

Answer 6

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

view full answer...

Answer 7

The diameter of the mounting holes of the #T0897900 are 5/8 inch. We also have this as a kit with the channel and mounting bolts/nuts with part #T1812200.

view full answer...

Answer 8

The internal width of the Titan Lunette Ring w/ 3-Position Adjustable Channel - 3" Diameter - Raw - 21,000 lbs #T1812800 channel is 3 inches. The channel is #T0897800 and I've attached videos to show this. The Titan Trailer Coupler -…

view full answer...

Recommended Shank to Fit With Dexter 2-Tang Clevis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching