Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
(3832 reviews)
Price: $43.72
In Stock
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Retail:$61.30
Our Price: $43.72
You Save: 29%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
33% prefer this
- All Info
- Reviews (3832)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- 2 Inch Ball
- One Ball
- 7500 lbs GTW
- Class III
- CURT
- Steel Shank - Gloss Black
- Steel Ball
Towing starter kit includes 7-1/2" long, powder coated ball mount; 2" diameter, chrome-plated, pre-torqued hitch ball; and pin and clip. Slides into 2" square trailer hitches.
Features:
- Starter kit has everything you need to tow, minus the hitch
- Ball mount provides drop or rise to fit your application
- Hitch ball comes torqued to factory specifications
- Chrome plating resists corrosion
- Black powder coat finish on ball mount for superior rust protection
- Pin and clip included - hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 2" x 2" trailer hitch receiver
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Ball mount length: 7-1/2" from center of hitch pin hole to center of ball hole
- Drop: 2" from top of inside of hitch opening
- Ball size: 2"
- Shank diameter: 1"
- Warranty:
- Limited lifetime for ball mount
- 1-Year limited for ball
45036 Curt Loaded Ball Mount - Quick-Loading 2" Square Ball Mount with 2" Chrome Hitch Ball - 2" Drop
Item # C45036
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs - C45036
Average Customer Rating: 4.9 out of 5 stars (3832 Customer Reviews)
Towing starter kit includes 7-1/2" long, powder coated ball mount; 2" diameter, chrome-plated, pre-torqued hitch ball; and pin and clip. Slides into 2" square trailer hitches.by: Robert05/10/2023
The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.
by: Steven04/11/2024
Package was delivered empty ... see ph otos
by: Peter02/06/2020
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load.
etrailer's price is about as good as it gets and delivery is very speedy.
Peter
2/7/2021
The Curt Class III Ball Mount with 2 Ball - 2 - 7,500 lbs is a very high quality, very heavy duty piece of towing equipment. I highly recommend it for anyone, professional or home user, for mid-level towing jobs.
by: Harold H07/13/2016
Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts !
Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop
Harold H.
7/13/2017
Still working Quality product Highly recomend !
by: Hawkins02/11/2017
Ordered this to complete my Curt Receiver Hitch. Not too much to say. It is a new small drop Hitch with a mounted ball and pin. I do like how the ball has machined wrench flats at the base to make removing the ball much easier in the future. As always ensure you insert the new hitch with a good coat of anti-seize!
by: Ed08/23/2020
My OEM Tow Hitch receiver was rusted out and the Ball mount was rusted to it, I had to replace both and the install went smooth. After I installed the Curt Tow Hitch Receiver I slid in the Curt Ball Mount and secured it with the included pin and cotter pin and I was off to the harbor to Launch my Waverunners for a fun filled day.
by: Jeffrey03/19/2018
The ball was already mounted and came with a strong pin.
Jeffrey B.
3/19/2019
Its been a year and Ive used it a lot more than I thought I would and its held up very well. I would definitely recommend etrailer.com if you need a hitch and the wiring. It was very simple to install took a couple hours. The biggest thing is I saved myself probably three to four hundred dollars by doing it myself and have a great product that looks professional on my vehicle.
by: RenCan7302/09/2024
Worked like a charm for its intended purpose. Unfortunately I haven't used it that often because I needed a taller one for what I have been hauling.
by: Al M.10/03/2018
I'm glad I found etrailer.com for my trailering needs! Just received my ball mount with 2"ball and hitch cover for my 05 Ford F-150 FX4 Supercrew and I was impressed with the solid quality of both my items. Just ordered a hitch lock and I'm sure it will be of excellent quality AS WELL!! Fast shipping and items were packaged really well!!
I highly recommend etrailer for your towing needs!!!!
by: Barry B09/13/2015
Hitch for my 2010 Lexus RX450H was very easy to install. I am 72 years old, so it took almost 2 hours of my time to do it. It is a very clean installation and all parts fit perfectly. I used a simple floor jack to lift the hitch into position. The plug and play wiring was a real plus. The connector was where it was promised on the drivers side, under the plastic flaring.
by: Chris H02/15/2016
I've made several purchases from e-trailer.com and have had excellent service and quick delivery.
The front hitch was difficult to mount because the straps welded to the 1/2 inch nut weren't quite long enough to catch the thru bolt. I had a fairly hard time lining the nut up but was able to do it.
by: Bronson L.06/01/2017
One word-Perfect! I make all of my purchases online, and using etrailer.com for my recent purchase of a trailer hitch, wiring harness, luggage carrier, and trailer ball were one of the best online purchase experiences yet. The website is awesome, the how to videos are unmatched, and superb cusomer service. Highly recommended! Add all that to great variety of products!
by: Mike C.05/24/2017
Thank you George and etrailer. Very fast and timely delivery, only 2 days from ordering!! Product took 1 1/2 hours to install, with the assistance of my 13 year Grandson. We are ready to use the hitch this summer. Future trailer needs will be sought thru etrailer.
by: Timothy03/12/2023
Initially bought the wrong item, customer service was outstanding with helping get through right item and their knowledge was excellent. We were able to ship back the wrong item and received the correct fast. Would highly recommend this company. The ball mount has worked perfectly as well
by: Jim W09/05/2017
Incredible price on a great hitch from Curt. I have no idea how etrailer can offer free shipping on something like this, but they do. Awesome. I ordered the ball mount complete with 2" ball and pin/clip which was likewise priced extremely competitively. The hitch bolted up to my Transit T-250 easily. I took the extra step of running a tap into the (4) unthreaded holes on the van, but it's not necessary. For me, it just made the install a little easier and made me feel better. The new Transits are generally lower in the rear vs. the old E series van's, so I flipped the ball mount into the "rise" position to get the right ball height. Stated specs for the ball mount were 2" Drop and 3/4" Rise.
by: Ronnie W03/08/2018
I recently purchased this hitch and related wiring accessories from etrailer for my 05 Hyundai Tucson. Following the included installation instructions I found the hitch easy to install. Total install time including the wiring adapter was approximately 1.5 hours without rushing.
by: Raynard M.08/07/2017
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself.
I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed.
Thanks etrailer! You have a good thing going. Keep up the good work.
by: Donald S.10/11/2018
I very recently ordered, a Curt class 111 Ball mount with 2" drop- 7500 lbs and an adapter 7 pole to 4 pole with tester and cover, as a first time customer . I was needing to pull my golf cart and trailer to a new home . I chose the 5 to 7 day standard mail delivery. I very quickly received an email from ETrailer customer service Rep. George J. To advise that he was turning my order around quicker with a 3 to 5 day delivery.
This was my first experience with ordering a product from your company and I was extremely impressed with ETrailer outstanding customer service. I mentioned this to a neighbor of mine and He stated to me that he had bought several things from ETrailer and had always had excellent service. Thank You ETrailer and George J. For Your outstanding Customer service.
Jean S.
10/12/2019
Great!
by: Bob C07/14/2016
My first trailer hitch was delivered bent. Bent in two planes so it couldn't be straightened by me. Mark and Jana arranged to have a replacement sent right away. It arrived and it, too, was bent but only slightly. It straightened easily. Went on as advertised in less than an hour!
I bet that many trailer hitches arrive bent. They are shipped in a plain cardboard box. The long flange is the one that is bent, and typically the box is smashed on one end and the flange sticks out. I don't know ow much you spend on reshipping but I bet a little $$$ spent on better packaging would pay off.
Bottom line for me: the customer service was excellent - couldn't be better.
Bob C.
7/14/2017
I couldnt be more pleased with the product!
by: Claire07/03/2019
My first venture into towing trailers and it's been AOK. Your website made it easy to figure out what to order (drawbar and ball hitch thing); the products arrived quickly and in good shape, and I found a local installer who evidently had no trouble with a solid installation (i.e. a good fit). I don't do a lot of towing but happy to have the option to do so now. I'll be back for more stuff, count on it :-)
Claire S.
7/7/2020
solid as a tank & etrailer ROCKS
by: Harold05/31/2016
Who it concerns,
I needed to purchase a new trailer hitch as one I had rusted and weakened badly. I did shop around, and felt etrailer. com with free shipping included in the total cost was the better value. Received hitch within a reasonable delivery period, and installed the hitch with absolutely no problem, in a very short time, as all nuts and bolts were included with the hitch.
I was, and am very well satisfied with all aspects of my purchase from etrailer.com.
Harold
1/24/2018
The item to date has performed to my satisfaction, and pleasure.I would not hesitate to purchase the item, from your company, again.
by: Kevin E.03/12/2017
Very easy to install!
Kevin E.
3/12/2018
Still working great!
by: TBone2203/10/2017
This product may seem trivial as far as a review goes, but it is the main piece for towing besides the trailer hitch itself. Buying it with the ball attached and torqued is the best way to go. Buying separate and trying to tighten to specs is hard to do, so this eliminates the worries of it coming off in a tow down the road.
Tbone22
3/14/2018
Product has been working great. Very good quality
by: Nelson04/27/2017
package arrived on time. the box arrived damaged scratches on paint but I still installed it. installation was easy thanks to you tube. the bracket for the wiring was short for my 2017 Honda pilot. bracket needs to be at least 3 inches longer I have attached some pictures other than that I would have been much happier it will do for now. I Hope this review help for the piloteers.
25
3807
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Curt T-Connector Wiring for 2018 Dodge Durango Without Factory Towing PackageYes, the Curt T-Connector # C56336 that you referenced is exactly what you want for your 2018 Dodge Durango without the tow package. If you don't already have a trailer hitch then I recommend going with the Curt Class III # C13182 which is easy to install and will allow you to keep your spare tire installed under the vehicle if it is the 18" size. To round out a towing package you also need a ball mount like the Curt # C45036. I recommend checking out the linked ball mount article to...
view full answer...
- Recommended Parts Needed to Tow with a 2018 Toyota TacomaTo tow a trailer with your 2018 Toyota Tacoma I recommend using the Curt Trailer Hitch Receiver # C13264 along with the Curt T-Connector # C56349 wiring for a 4-Way Depending on the weight of your trailer and the guidelines in your owner's manual/local laws you may need to utilize brakes on your trailer. If this is the case then I recommend the Tekonsha OEM Kit # 22117 which will give you a 7-Way and brake controller connections. For a high quality brake controller I recommend installing...
view full answer... - Draw-Tite Class III Max Frame Receiver Hitch & 2018 Dodge ChallengerHello, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 76145 for your 2018 Dodge Challenger as long you do not have the Quad-Tip Exhaust; this is rated at a 675 lb. tongue weight. If you do have the the Quad-Tip Exhaust, I suggest the Curt Trailer Hitch Receiver # C13236. The wiring connections I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118656. All items I recommend here are confirmed fit for your 2018 Dodge Challenger. I have...
view full answer... - Is a Wiring Harness Included with the EcoHitch # 306-X7332 for a 2017 Volkswagen Golf RThe EcoHitch Hidden Trailer Hitch Receiver # 306-X7332 only comes with the trailer hitch itself, but for wiring we have the Curt # C56374 which fits the R model of your 2017 Volkswagen Golf. If you are looking to tow with your VW Golf then you will also need a ball mount, hitch ball, and hitch pin and clip. I recommend the Curt Kit # C45036 which comes with all of these components but you will want to check out the linked ball mount article to ensure that the 2" drop is correct for your...
view full answer... - Trailer Wiring Needed to Tow a Small Trailer with a 2018 Honda PilotFor a 4-Way connector to tow your small trailer I recommend using the Curt T-Connector # C56291. This plugs right into existing wiring on your 2018 Honda Pilot, includes all of the fuses needed to activate your tow package, and will provide all of the signals for the basic lighting functions on your trailer. To complete your towing setup you will also need a ball mount and hitch ball. I recommend a ball mount kit like the Curt # C45036 but you will want to check out the linked helpful...
view full answer... - Fuse Location for Installing Trailer Wiring on a 2018 Honda PilotI would be glad to help! When installing the Curt T-Connector # C56291 on your 2018 Honda Pilot, it looks like the location for the included fuse is the number 2 location in the fuse box that is located near the brake fluid reservoir (near the driver's side under your hood). If you check out the linked installation video on a 2017 Pilot you can see this being done. If you don't already have a trailer hitch and a hitch ball kit then I recommend the etrailer.com Trailer Hitch Receiver #...
view full answer...
- Will Curt Hitch # 13356 Fit on a 2016 Toyota VenzaI checked with the manufacturer and the Curt Class III Hitch # 13356 and the Curt T-Connector Wiring Harness # C56079 are both confirmed to fit your 2016 Toyota Venza LE AWD. I've linked an install video for the wiring harness for you to use as a reference. If you need a ball mount and hitch ball, the Curt Class III Ball Mount and 2" Hitch ball # C45036 can complete your towing package on your 2016 Venza.
view full answer... - Which Curt T-Connector Fits a 2018 Jeep JL WranglerWe do have a Curt T-Connector that fits a 2018 Jeep Wrangler JL but the part # C55124 that you referenced does not fit. Instead you need part # C56407 which tees in behind your tail lights and then draws power directly from your battery via the included black wire. The great thing about drawing power directly from your battery is that your vehicle wiring is completely protected in the event that something goes wrong with your trailer wiring. Attached is an installation video of this wiring...
view full answer...
- Parts Needed to Add a Fully Functioning 7-Way to a 2006 Ford E-250We do have the equipment that you need to add a fully functioning 7-Way to your 2006 Ford E-250 but you do need a 4-Way on it. If you do not already have one then I recommend the Curt T-Connector # C56020. This kit plugs in directly behind your tail lights and provides you with the basic lighting functions for your trailer. Once you have a 4-Way connector on you E-250 you to install our Universal Wiring Kit # ETBC7. This includes everything you need to add a fully functioning 7-Way and...
view full answer... - Which Hitch for 2019 Ford Edge Does Not Require Heat Shield RemovalI can understand your concern; thankfully, I can offer a couple solutions. The Draw-Tite Trailer Hitch Receiver # 75234 states that only the Sport model of the Edge requires the heat shield to be removed permanently. However, when we installed it on a 2018 Ford Edge Titanium (non Sport), we found that it also required the heat shield to be removed and it cannot be modified or re-installed. The reason this is the case for the # 75234 is because it's designed to fit more snugly against your...
view full answer...
- Parts Needed to Tow a Trailer with a 2017 Dodge Durango R/TSince you are wanting to keep your full size spare installed on your 2017 Dodge Durango R/T the trailer hitch that you need to use is the Draw-Tite # 75713. This has a Tongue Weight (TW) rating of 900 lbs and a Gross Trailer Weight (GTW) rating of 6,000 lbs. When used with a weight distribution system the TW stays the same but the GTW jumps up to 7,500 lbs. You will need to consult your owner's manual regarding your max towing capacity as it is typically lower than what the trailer hitch...
view full answer... - What is the Torque Spec for the 2" Hitch Ball That Comes with the Curt Class III Ball Mount # C45036The 2" hitch ball that comes with the Curt Class III Ball Mount # C45036 is actually pre-torqued so you don't have to worry about torquing it.
view full answer... - Availability of Ball Mount with Built-in Hitch BallWe do have ball mounts with the ball installed like the Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs # C45036. If you do a search of "ball mount with ball" all of the available products will come up and you can choose one based on drop/rise and ball size. We also have the Euro-style drawbar. A Euro-style drawbar is a one piece unit, with the trailer ball permanently welded to the drawbar, versus a standard drawbar that uses a trailer ball that can be removed. I have included...
view full answer... - What Determines the Weight Capacity When Installing a Trailer Hitch on a 2016 Jeep CompassThere are a few factors that you need to take into consideration when looking at weight capacities for your 2016 Jeep Compass. You will want to compare the Gross Trailer Weight (GTW) and Tongue Weight (TW) capacities with that of your Jeep to see what you can safely tow when it comes to a trailer. The determining factor is whichever of those weight capacities is lowest whether it is your Jeep or the trailer hitch itself. For your Jeep Compass I recommend using the Draw-Tite Max-Frame Receiver...
view full answer... - Will the Curt Trailer Hitch # C13042 Fit a 1998 Chevy Pickup 1500The Curt Trailer Hitch Receiver # C13042 that you referenced is a confirmed fit for your 1998 Chevy 1500. If looks like when you selected your vehicle you chose "1998 Chevrolet C-Series Medium Duty" instead of the "1998 Chevrolet C/K Series Pickup" catagory that your 1500 falls under. If you will be using this trailer hitch to tow lighter trailers that don't utilize brakes then you will also want to install the Tekonsha T-One # 118315 to activate the basic trailer lighting functions....
view full answer... - 2 inch Drop Ball Mount with 2 inch Hitch Ball RecommendationWhen you measure the trailer you want to measure from the bottom lip of the coupler down to the ground when level. So if you measured from the inside of the ball of your coupler down to the ground most likely you'd need 2 more inches of drop than what you came up with. The Curt ball mount part # C45036 has a 2 inch drop, fits a 2 inch hitch, and comes with the ball installed already so it would be ready to go. It has a 7,500 lb capacity too.
view full answer... - Trailer Wiring Harness Needed for a 2014 Ford E-150 Without Tow PackageIf you do not have any connectors at the rear of your 2014 Ford E-150 then you will need the T-One # 118551 for basic trailer light functions. From here you will need to see what kind of connector you have on your trailer for the reverse lights. For a 5-Way connector use part # 47515 and connect the blue wire to your reverse light function. If your trailer has a 7-Way then you need to install the Adapter # 37185 or the Universal Wiring Kit # ETBC7 which comes with enough wiring and connectors...
view full answer...
- Torque & Wrench Size For Using Curt Ball Mount C45036 in Rise PositionWhat you would need is a 1-1/2 inch wrench for the nut, and tighten it to 250 ft-lb of torque for the Curt Class III Ball Mount with 2" Ball # C45036. This can be used in the rise position if you'd like by flipping it, just like you said. This ball mount does come with a pin and clip, but if you'd like to lock it in your hitch for added security, you can do so by adding the Trailer Hitch Receiver Lock for 2" Hitches # e98880. I have added a link below to a video review for you to check...
view full answer... - Towing Products For 2010 Subaru ForesterYou have listed all of the items you need for your 2010 Forester. The trailer hitch # 13147 is a Class lll hitch and it has a 2-inch receiver opening. Per Curt, any non-trailer load like bike carriers, or cargo carriers must be supported by stabilizing straps like part # 18050. The Curt T-Connector Vehicle Wiring Harness # C56040 is an easy installation by plugging into your Subaru wiring harness behind the trim panel in the rear cargo area. The Curt Ball Mount # C45036 may work great...
view full answer... - Complete Setup for Towing with a 2008 Ford E350 Super Duty Shuttle BusEven though your shuttle bus is built on a 2008 Ford E350 chassis you will most likely need to install a universal hitch and wiring because of how different a shuttle bus and a van are. The most popular Universal Adjustable Trailer Hitch that we carry is the Curt # 13703 which will fit vehicle frames that are 22" - 72" wide. This trailer hitch has a 2" receiver opening and has a max Gross Trailer Weight (GTW) of 3,500 lbs and a max Tongue Weight (TW) of 350 lbs. You will want to check...
view full answer... - Parts Needed to Tow a Boat Trailer with a 2017 Nissan FrontierWe do have both trailer hitches and wiring for your 2017 Nissan Frontier, but they are not sold together as a kit. I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 which is a custom fit, Class III hitch with a 2" receiver opening. This comes with a limited lifetime warranty and has a Gross Trailer Weight (GTW) rating of 5,000 lbs with a Tongue Weight (TW) rating of 750 lbs. When you add a weight distribution system those capacities increase to 8,000 lbs GTW...
view full answer... - Recommended Transportation of Motorcycle and Boat Trailer with a 2003 Ford F-350 Long Bed DieselI do have a solution for you, but there aren't any motorcycle carriers that also are capable of towing a trailer. The best solution is for you to transport your motorcycle in the bed of your truck with some ratchet straps like # EM05710 and to help load it with a ramp like # EM07464. Then tow your boat trailer with a ball mount and ball. To determine the correct ball mount needed for your trailer you will need to take a few quick measurements. I have linked a Help Article on how to...
view full answer... - Best Trailer Hitch for 2002 GMC Sierra 1500Yes! The trailer hitch # e98849 is a confirmed fit for your 2002 GMC Sierra 1500! I attached a video of the install process if you want to check it out. If you're using this to tow, you might also want to pick up our towing package with a ball mount # C45036 and wiring harness # C55384.
view full answer... - Does The Curt C13130 Hitch Fit A 2014 Acura RDXYes, the Curt Trailer Hitch # C13130 does fit your 2014 Acura RDX. This hitch is capable of supporting a maximum GTW of 4,000lbs, and a maximum TW of 600lbs. If you're interested in a ball mount kit, I recommend the # C45036. This kit includes a ball mount with 0" of rise, and 2" of drop, along with a 2" ball and a hitch pin and clip. If you want to complete the set-up, you'll also need wiring. Trailer wiring will provide lights to your trailer so you can be in legal compliance and safe...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jeff D
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Joshua S
Written by:
Laura H
Installed by:
Cole B
Installed by:
Brent H
Installed by:
Bradley B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
5/11/2024
A year later I havent thought about my trailer hitch once,which is excellent and exactly what one wants with a hitch.