Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
(3836 reviews)
Price: $33.63
In Stock
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Item # C45070
Retail:$62.17
Our Price: $33.63
You Save: 46%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3836)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45070
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 6 Inch
- Rise - 4 Inch
- No Ball
- 7500 lbs GTW
- Class III
- CURT
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Corrosion-resistant, black powder coated ball mount measures 9-1/4" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction
- Corrosion-resistant, high-gloss black powder coat finish
- Hitch pin and clip or hitch lock sold separately
Specs:
- Application: 2" x 2" trailer hitch receivers
- Length: 9-1/4" from center of hitch pin hole to center of ball hole
- Rise: 4" from top of inside of hitch opening
- Gross towing weight: 6,000 lbs
- Tongue weight: 600 lbs
- Drop: 6" from top of inside of hitch opening
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Ball hole diameter: 1"
- Platform width: 2-1/2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
45070 Curt Class 3 Ball Mount - Standard Duty 2" Square Ball Mount - 4" Rise, 6" Drop
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs - C45070
Average Customer Rating: 4.9 out of 5 stars (3836 Customer Reviews)
Corrosion-resistant, black powder coated ball mount measures 9-1/4" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.by: Owen05/15/2024
I purchased Curt's 6" drop ball mount for my 2012 Jeep Wrangler Sport which is not lifted but has 32" tall tires. The utility trailer I plan to purchase recommends a 12" tongue/ball height for level towing. The Curt 6" drop ball mount places my tongue/ball height at 13.5" which is acceptable. The bottom of my tow ball mounting nut is now 12" above the road surface. Plenty of clearance for safe towing. I'm very pleased with the quality and functionality of my Curt ball mount. I'm looking forward to purchasing a utility trailer soon. I think it will tow very nicely using my Curt 6" drop ball hitch.
by: Sara01/19/2024
I bought this on my knowledgeable brother's advice - he gave me the exact order number and link to buy from etrailer! I had it installed locally, without complications. I use my truck mostly to haul my horse or my friend's two donkeys in my 14-foot stock trailer. I have no complaints, the hitch does what it's supposed to do.
by: Chris11/12/2023
Easy install, everything included, and great instructional video. Worked out great for my RAV4.
by: David10/23/2021
Perfect height for my boat trailer on 2021 Toyota Rav 4 Adventure with EcoHitch. Quick service and easy ordering.
by: Tom11/17/2020
Works as advertised. Great fit and now my boat is level traveling down the road. Fast turn-a-round. For [xx] shipping and the heavy weight, expected delivery in a week or two. Two days later it was at my doorstep, arriving late evening. Great service. Thank you.
by: Eric 03/14/2023
The mount has worked well. It is sized right to pull our small trailer and I also pulled a boat 600 mi with no issues.
by: Scott R01/22/2016
Worked perfect for my tool tug application. See attached photo.
by: martin10/31/2015
The products (ball mount; hitch pin; spring) i received from etrailer.com are Curt branded. For me that means a first class hitch, accessories and great service from etrailer.com. eTrailer.com had the best total cost for the items I wanted. There C/S was outstanding.
martin
houston, texas 77096 usa
Martin
11/2/2016
I am pleased with the products for my Curt hitch.....also please with etrailer.com thank you
by: Great Hitch05/10/2019
trailer hitch works great with no flaws in manufacturing welds. Purchased to drop cycle trailer down 4 " off my honda Pilot. Now trailer is level and goes down the road great.
Stevet
5/10/2020
Great Hitch, Curt is a forerunner in trailer hitches.
by: tlbranth07/18/2015
Just what I needed for an unusual setup on a VW Vanagon. What I like about etrailer is the detailed information provided on the site. The measurements were very helpful in getting the right parts. Thanks
Terry B.
7/17/2016
Works great. Just what I needed.
by: Michael08/14/2022
The trailer hitch was top notch, very impressed. Unfortunately, the packaging was NOT. The receiver hitch was shipped loose in the box and the flanges that bolt to the frame of the vehicle busted through both ends of the box. The powder coat was scraped off one side due to this. The hitch needed to either be wrapped better or cardboard added to the box ends to keep this from happening.
The electrical receptacle I ordered at the same time was also loose out of the packaging, inside the box bouncing around with the heavy 4" rise ball mount. I was actually surprised that none of the fasteners were lost due the gaping holes in the box or that the electrical connector wasn't damaged, but fortunately, this time everything was okay.
I think this is a great company with great products, it's just very unfortunate that their shipping department doesn't take as much care in the delivery of those products.
by: Roger 07/22/2022
We didn't actually use this drop hitch. We were going to use it in the rise orientation, but it was a tad bit too tall as the tail gate hit the trailer hitch. It looks like a quality part, but I don't have any use info for you.
by: Francis 08/25/2023
Great product. Fast service. Thanks.
by: Owen C07/20/2015
This product has the lowest drop of any bar I could find while still supporting 7500lbs. I needed it because I just bought a big flatbed landscaping trailer, and when I tow it, I do so with a Y-connector and a bike rack. With the 7500lb drawbar that came with the new trailer, there wasn't enough room above the ball hitch to connect or disconnect the trailer to it without removing the bike rack first. This product solves that problem.
by: Mark 08/05/2023
nice hitch , just what i needed
by: Mike S05/08/2017
I have been very pleased with this product so far and am extremely pleased with the Customer Service I have received from etrailer. I originally ordered a ball mount with a 8" drop. After receiving it and trying it out I found that I miscalculated and my boat trailer was not sitting level. I contacted etrailer and received an email with a UPS prepaid shipping label the next day. The whole thing could not have been easier on my end. That is how it should be done. Thanks to the etrailer team.
Mike
by: Gregg Gerich05/31/2019
I just want to say. The trailer receiver I ordered was the best. The shipping deliver was fast. I called by phone to get just what I wanted. Do not trust the email pictures with what you just ordered. When I saw them I tried to cancel the order. It did not look right. When I received my order it was more than prefect.
My suggestion to all of you, explain in full detail what you need and they will ship the right hitch.
by: Al P07/28/2017
The products bought were exactly what I expected with regards to quality. But what I appreciated most was the short amount of time it took to receive the items - very quick turn around from placing the order to receiving all of the items. I had emailed etrailer a couple of times, once to get the tracking number and another just to acknowledge receiving it and both times customer service replied right away - so kudos to George J and the customer service team.
by: Devin08/27/2022
Works great, and the low profile keeps it out of the way. The adaptor cable made it plug and play for my 2021 Nissan Frontier.
by: Robert04/04/2019
Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.
by: James12/01/2018
What is there to say about a trailer ball and ball mount? Many miles on it and the trailer hasn't fallen off. Never had any problems with any Curt product.
by: David H.02/14/2018
I purchased this ball mount for my Dodge Ram 2500, and have towed a Jayco travel trailer >5000 miles since then with no troubles. Fit and finish are excellent; still looks new after a year of use.
by: Evan07/26/2017
Product is straightforward and is solidly built. Works great as an easy solution for anti sway if you use several different hitches.
by: Mark L.07/26/2019
The ball mount, ball, hitch pin and light kit are still working well after a year.
by: Bob10/22/2015
Hitch and ball arrived quickly and were of high quality. powder coat finish looked great. Also compliments to the etrailer folks: their followup on the order was fast and professional. Their website is very easy to use and the tracking system for orders uses a pictorial map.
great work etrailer!
25
3663
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Ball Mount Recommendation for 2013 Ford Escape Towing Rental Trailer with 18 inch Coupler HeightTo tow the rental trailer you mentioned level you'll need a ball mount that has a 4 inch rise with the Draw Tite hitch part # 75758 that you referenced. So for that we have the Curt # C45070 which would work well. Then for a hitch ball you'll want the part # 63845 for a 2 inch ball
view full answer...
- Trailer Hitch, Wiring, Brake Controller and Accessories for a 2011 Nissan XterraFor your 2011 Nissan Xterra Curt hitch # 13514 and wiring harness # 118266 will work just fine. Brake controller and harness # C24VV and # C51515 are also going to work just fine. But instead of using # ETBC7 you would use # 5506. this is because you do not need all of the stuff included with the ETBC7. You will still need to route the brake controller blue output wire to the back of the 7-Way, attach it to the back of the 7-Way in the 7 o'clock position. Remove the wire that is already...
view full answer... - Hitch Fit, Towing Accessories and Included Install Hardware for 2020 Toyota Rav 4The Curt Class III 2 inch receiver you refer to, part # C13146 is indeed a fit for the 2020 Toyota Rav4. All the hardware necessary for installation is included. If you'll be towing with your RAV4, you'll need a wiring harness, a ball mount and a trailer ball to complete your towing system. For a wiring harness, you'll need # C56434 which installs according to the video I've linked for you. For a ball mount, the # C45070 would put your trailer ball right at about 16 inches tall, which...
view full answer... - Class III Trailer Hitch Fit for 2006 Dodge Caravan Without Stow and Go SeatsAlthough we do indeed have hitches that will fit your 2006 Dodge Caravan, the # 13037 you'd mentioned only fits the 2nd generation vehicle (1991-1995). For your 4th generation 2006 Caravan, I'd recommend the Draw-Tite Class III receiver hitch, part # 75119 which you can see being installed by clicking the provided video link. If you'll be towing with the hitch, you'll also need a # 118300 trailer wiring harness (video also linked), a ball mount like # C45070 and for a 1-7/8 inch trailer...
view full answer... - Can Hopkins Wiring Harness for 2013 Subaru Outback be Stored in Hatch When Not in UseYou can absolutely store the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143865 in the hatch of your 2013 Subaru Outback when you aren't using it instead of routing it outside the vehicle. The connector end will be long enough to hang outside your hatch when you need to connect it to your trailer. I have added a link to the instructions and a video install for you to check out as well of the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143865. If you also need a trailer...
view full answer... - Differences Between Curt and etrailer Hitches Available for 2020 Toyota RAV4In just about every respect, both hitches are identical. The only major difference is that the etrailer offers a 75 lb higher tongue weight capacity. (You'd still need to abide by the towing capacities set forth by Toyota in the owner's manual). Because the hitches are so similar in appearance, installation procedure, build quality and capacity you can't go wrong with either hitch option. You can choose the less expensive option and not feel like you've sacrificed anything. If you wanted...
view full answer... - Recommended Hitch And Wiring For A 2021 Toyota RAV4 HybridWe definitely have options available to set up your 2021 Toyota RAV4 Hybrid to tow a trailer. The Curt # C13416 Class III Hitch is a great place to start. This American made hitch is rated up to 4,000 pounds towing and 600 pounds of tongue weight and will definitely handle the small trailer you are looking at. This is a bolt on application with no drilling is required, but if present, the tie down bracket from the bottom of the passenger-side frame rail will need to be removed. Next you...
view full answer... - Choosing Beteween Curt or Draw-Tite Class III Trailer Hitches for 2020 Mazda CX-5Draw-Tite has been around a lot longer than Curt, but both make a high quality product, you can't go wrong either way. If your CX-5 has a Diesel motor, you'll use the Draw-Tite Class III hitch, part # DR44FR which is the only fit offered. If you have the gasoline engine, you'll have the choice between the Curt # C13315 or the Draw-Tite # 76138 that you'd looked at. Both hitches are a concealed design, which means that once they're installed, everything but the square receiver tube and...
view full answer... - Differences Between Available Class III Hitch Options for 2020 Honda OdysseyBoth hitches would share the same 525 lb tongue weight/3500 lb towing GTW towing capacity, but the similarities would end there. The Curt # C64NR is a concealed design, meaning that the majority of the hitch would be concealed behind the Odyssey's bumper when the hitch is installed with just the receiver and safety chain loops being visible. Because of the concealed design, the bumper cover would need removal to install the hitch and would be reinstalled afterward. The Curt # C13370 is...
view full answer...
- Recommended Parts Needed For Trailer Towing With a 2007 Toyota Sienna XLE I'm going to start with the receiver before getting to the ball mount you are looking at. I recommend using the etrailer Trailer Hitch Receiver # e98837 on your 2007 Toyota Sienna. Some important measurements to consider is the receiver height and hitch pin length to the bumper. When we installed this receiver on a similar 2006 Sienna the receiver height measured 10" from the ground and 6" from the hitch pin center hole to the rear edge of the bumper. The Curt Ball Mount # C45070 will...
view full answer... - Curt Trailer Hitch Receiver # C13381 Height When Installed On a 2018 Volkswagen TiguanWhen we installed the Curt Trailer Hitch Receiver # C13381 on a 2018 Volkswagen Tiguan in our shop the top inside of the receiver tube sat at 11-1/2" tall. Using a Curt Multi-Ball Mount # C62KR that does not have a rise or drop would put your coupler height at 12" to the bottom of the coupler. Without knowing the height of your 14 foot john boat trailer when it sits level I cannot tell you if you will need a rise style ball mount like the Curt Ball Mount # C45070. If you can tell me...
view full answer...
- Recommended 10,000 lb Capacity Ball Mount and 2 Inch Hitch Ball With 7 DropThere is a ball mount that has a 2" hitch ball and the 7" of drop you are looking for. Since you have a 10,000 lb capacity Demco Channel Tongue Trailer Coupler # DM13689-95, in order to match the weight capacity and get the 7" of drop you need, you will need an adjustable ball mount: - B&W Tow & Stow 2-Ball Mount # BWTS10040B (Black) or # BWTS10040C (Chrome) The Tow & Stow has a 2" and also a 2-5/16" ball, a 10,000 lb towing capacity, and up to 7" of drop so it matches everything you...
view full answer... - Trailer Hitch and Trailer Wiring Harness Recommendation for 2020 Toyota RAV4 AdventureThe two hitches available for your 2020 Toyota RAV4, the Curt # C13416 and Draw-Tite # DT82QR are just about identical visually with very similar capacities. They would install in the same manner with similar procedures. Both hitches are pretty much on par with each other quality-wise, but the Curt powder coat typically looks a little better and is a bit more durable over time than that of the Draw-Tite # DT82QR. If I had to choose, I'd go with the Curt model but you could choose either...
view full answer... - 4 inch Rise Ball Mount Recommendation for a Mazda CX-7You should have no problem using a ball mount with a total rise of 4 inches on the 2 inch hitch of your Mazda CX-7. The ball mount wouldn't put any undue stress on the hitch. Hitches are designed for use with ball mounts that have varying heights to allow for trailers to be towed level and a 4 inch rise is a very common amount of rise needed. For a ball mount that has a 4 inch rise you would want the part # C45070. I attached a review video for this ball mount for you to check out as well.
view full answer... - Least Visible Hitches Available for 2020 Toyota SiennaWe have a couple of options for your 2020 Sienna that feature a concealed cross tube. This means that the only portion of the hitch that will be visible is the receiver tube and the safety chain loops, the cross tube will be hidden behind the bumper fascia. I'd recommend the etrailer.com brand Class III hitch, part # e98853, as it's assembled in the USA. If you look at the photo I've provided, you can compare how the concealed and non-concealed hitches appear on the vehicle. If you'll...
view full answer...
- Is the Curt Multipurpose Ball Mount Available with More DropI do have a possible alternative option for you but the Curt Multipurpose Ball Mount part # D210 is not available with a 4" or 6" drop nor do we have anything similar. However, if you wanting to tow a trailer and carry a bike rack at the same time behind your motorhome then you can use the Curt Clamp-On 3 Bike Rack part # C18013 with most standard ball mounts like the Curt Ball Mount part # C45070. There is also options for a-frame trailers like the Stromberg Carlson Bike Bunk Trailer-Mounted...
view full answer... - Is The Curt RockerBall Anti-Rattle Towing Kit # C43KR Available With a 2-5/16" Hitch Ball? For this you will need the Curt Ball Mount # C45070, Curt Anti-Rattle Kit # C69HR and the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball # C82KR. The ball mount and anti-rattle kit are the same ones that are included with the Curt RockerBall Anti-Rattle Towing Kit # C43KR.
view full answer... - Choosing Proper Ball Mount for 2016 Honda PilotIf you've determined that you needed a ball mount with a 4 inch rise, you can't go wrong with the Curt # C45070. The ball mount has a 7500 lb capacity, which will be more than enough for your Pilot. To confirm that a 4 inch rise is correct for your needs, look at the FAQ article I've linked for you. The article shows how to measure in order to determine the rise/drop ball mount you'll need. You might not find a ball mount with the EXACT rise or drop needed, but as long is you're within...
view full answer... - Best Trailer Hitch Receiver And 4-Way Wiring Harness For a 2022 Honda CR-V EXFirst I recommend the etrailer Trailer Hitch Receiver # e98848 for your 2022 Honda CR-V EX. This class III receiver is capable of towing a trailer up tp 3,500lbs with up to 525lbs of tongue weight. When we installed this receiver on a 2021 model year in our shop the hitch height measured at 11-3/4" to the top inside of the receiver. Most trailers will have a hitch height of approximately 16" which would use a Curt Ball Mount for 2" Hitches # C45070. This ball mount will give you 4" of rise...
view full answer... - Curt Ball Mount Similar to D28 But Not as LongYes, the Curt ball mount part # D-28 is made in the USA. The part # C45070 is a very similar ball mount that is much shorter but has same rise/drop.
view full answer... - Ball Mount Rise Recommendation for 2010 BMW X5 Towing 18 inch Tall Trailer CouplerFrom the top of the receiver opening down to the ground will be about 13-3/4 inches when you install the Draw Tite hitch part # 75600 on your 2010 BMW X5. So you will need a ball mount with about a 4 inch rise. The Curt Ball mount # C45070 would be perfect for that. For a 2 inch ball you would want the part # 63845 or for 2-5/16 inch ball part # 63847. For trailer wiring you then would want the part # 119250KIT which I attached an install video for.
view full answer... - Can a Convert-A-Ball Cushioned Ball Mount Be Used with a Surge Coupler for Hydraulic BrakesThe Convert-A-Ball Cushioned Ball Mount for 2 Inch Hitches # AMSC6 that you referenced can be used with a surge coupler for hydraulic brakes, but you may notice a difference in how the trailer tows. We have had customers write reviews on both sides of the issue. Some have had no problems while others noticed it affected the braking of their trailer. I spoke with my technical contact at Convert-A-Ball about their cushioned ball mounts, and he said they do not have a stance one way or the...
view full answer... - Will Installing Trailer Hitch on 2019 Ford Edge Titanium Stop Hands-Free Liftgate From WorkingOnce installed, the Draw-Tite Class III # 75234 receiver hitch will slightly limit the areas under the bumper where the hands-free liftgate sensors can 'read' your foot passing under the bumper. The square receiver tube will block access in the middle of the under-bumper area, but the sensors will read just fine off to either side. The hitch will work great on your vehicle, and be pretty inconspicuous as well. Most of the hitch is hidden behind the rear bumper fascia, so the only visible...
view full answer...
- Parts Needed To Tow Small Pace American 4 x 6 Enclosed Trailer With 2020 Jeep CherokeeTo tow the small Pace American 4 x 6 enclosed cargo trailer with the 2020 Jeep Cherokee you will need a hitch (you already have), 4-way wiring, a ball mount, lock and hitch ball. I recommend Curt Vehicle Wiring Harness with 4-Pole Connector part # C56406 which is known to last a bit longer compared to the other wiring options available. You also need Curt Ball Mount part # C45070 which will give you the rise that you need. If your coupler is the standard height of 17" from the bottom...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video by:
Dustin K
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
1/19/2024
Wise brother you have there! I am so glad this was the perfect fit for you. Let us know if you need any other items.