Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
Heavy-duty, sturdy steel ball mount with hollow shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (262 Customer Reviews)
Heavy-duty, sturdy steel ball mount with hollow shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
I like the extra long length. No one else make a hitch this long.
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
I didn’t receive the ball mount. Only thing in the box was anti rattle device
The products themselves I’m sure will do the job. I’m very disappointed in how they arrived. Poorly packaged, one piece of paper wrap did nothing. There was a hole in the box from the hitch not being wrapped up. There are chips in the powder coat.
This is really nice. Beveled edges so it slips into receiver hitch so sweet. Beautiful welds heavy weight mount for my weigh safe ball. I bought a 10,000 lbs hitch and I wanted a draw bar with the same type rating. Now the only thing limiting my trailer capacity is my truck's ability to tow, not the hitch, bar or ball.
I purchased a Ranch Hand rear bumper for my 2500HD but wanted to retain the use of a receiver hitch. The ball mount would need to extend 8" from the pin hole to even reach the edge of the bumper. This BM29 ball mount works out perfect. The welds look great and the finish is just fine. The only complaint I have is they gained a little length by moving the pin hole a little closer to the end shortening the insertion amount slightly. Not a big deal, it is just noticable next to the other mounts I have at the house.
Perfect size for a 2004 Jeep Liberty with spare wheel on back. Very nice quality. I can now mount my trailer hassle free.
Just bought a set of front steps for my boat, and needed some extra length on the ball mount.
This mount fits the bill at 13 1/4 long
Needed to extend my hitch due to tailgate needing to be open. E-Trailer had this one on hand for a very decent price. Easy order, and fast shipping. Thank YOu.
BM20 Long Drawbar. Perfect for my 2005 Jeep Liberty. I no longer have to remove the spare to tow. Solved what was a major pain!
Great for chassis cab trucks with long boxes.
Just what I needed to tow my boat
Richard J.
8/29/2019
Great
just what i needed
Gives me the extra 6" extension I need so that the rear liftgate on my van can open without hitting the trailer jack, or the spare tire which I carry on the trailer tongue.
This is a VERY solid piece, would easily handle far more than my 300lb tongue weight.
As usual etrailer delivered exactly as promised.
Paul R.
11/2/2016
its been hung on the back for a year. I never take it off.All kinds of weather, including Hurricane Matthew, Totally bulletproof.I have only one complaint, I bang my shins into it once in a whilewhen loading stuff in the back. But thats me, not the hitch.In a year its pulled 3 different boats, 2 different trailersand, in a pinch, anchor point for the chain while felling a tree.
This worked out perfectly. Had a flat bed put on one of our pickups, but the frame mounted hitch sat too far back from the new dock bumper. This ball mount moved it out just right so we didn't have to put a new receiver on the truck.
Jim H.
10/4/2014
Holding up very well after a year.
I love this trailer hitch for my truck because it allows freedom to put tailgate up and down when we do equestrian camping. It has been a great purchase.
Qrhi7y1chxstyilblt7ulq4dj2wrqs4jmhflp9dhmk=
12/6/2018
Great!
This product allowed me to open my deck lid on the tow vehicle while hitched. I love it, was delivered promptly and is excellent quality, could not love it more!
Also increased capacity from 600/6000 to 1000/10000 lbs. while not needed I like the safety of the margin.
Skip G.
8/20/2015
Could not be happier, great item.
Excellent, heavy duty, well built. HOWEVER, the width of the lip where the ball mounts is over a 1/4" wider than standard. This means standard accessories such as stabilizers and backup guides will not be able to be used with this ball mount.
Garry R.
3/31/2014
No change. I had to have a custom ball mount made because of the limitations of your product and the complete lack of anything else.
Hard to find item. But extends trailer back enough to open tail gate without hitting jack crank. Was not available at Northern or other suppliers locally.
Waddell
8/30/2016
Product has worked out to exceed my expectations. In fact it makes my trailer easier to tow.
This was exactly what I was trying to find in various stores with no luck. Quality built, American made product. Gives me the little extra distance for turning and allows tailgate to drop without hitting trailer.
Don
4/1/2019
I love the hitch. However, the crime [chrome] has come off of the ball and it has rusted. The extended hitch has worked very well in towing and launching my boat.
We got this so we could open our tailgate without having to unhitch the trailer. It works great! Product is good, service was fast... it made our trip to Alaska much happier (our dog needs the tailgate lowered so she can jump in and out for potty breaks). We still need to have the truck and trailer pretty much straight in line with each other... if there is too much angle left or right, we can't fully lower the tailgate. We drive a 2015 Ford F-150.
Always have the products and ships immediately. Thank You
I ordered the Dexter nev-er-adjust electric trailer brake and bearing kit's for my Aliner. The installation was easy thanks to your instructional video's. The delivery was fast and everything fit perfectly. I took one twelve hundred mile trip and had no issues. I also ordered the Brophy ball mount because it was long enough for me to drop my tailgate without hitting the hitch crank.
Thanks
As advertised. Great way to get extra clearance under my sled deck to haul our enclosed trailer and still open the front door.
Jason
1/5/2021
A year later and still no complaints. No signs of abnormal wear or stress on the hitch or stinger. Seems like it will do its job for a long while.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/15/2022
I will have our Customer Service team reach out to you. I recommend touching up the affected areas with a rust resistant paint such as Rustoleum.
Helpful Links
faq-rust-prevention-maintenance.aspx