Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
(2133 reviews)
Price: $36.10
In Stock
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Item # 3593
Retail:$51.36
Our Price: $36.10
You Save: 30%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2133)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch Ball Mount - 3593
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Drop - 3 Inch
- Rise - 2 Inch
- No Ball
- 2000 lbs GTW
- Class I
- Draw-Tite
- Steel Shank - Gloss Black
- 3/4 Inch Ball Hole Diameter
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction with a solid shank
- Black powder coat finish covers a-coat base for superior rust protection
- Hitch pin and clip included - hitch lock sold separately
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Class I and Class II compatible
- Gross towing weight: 2,000 lbs
- Tongue weight: 200 lbs
- Length: 6-5/8" From center of hitch pin hole to center of ball hole
- Rise: 2-1/8" from top of inside of hitch opening
- Drop: 2-3/4" from top of inside of hitch opening
- Ball hole diameter: 3/4"
- Pin hole diameter: 1/2"
- Limited lifetime warranty
3593 Draw-Tite Ball Mount 2-1/8" Rise or 2-3/4" Drop - 2,000 lbs
Replaces 6803
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K - 3593
Average Customer Rating: 4.8 out of 5 stars (2133 Customer Reviews)
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.by: Bob K03/03/2023
Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.
by: DonW.09/03/2022
Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!
by: Jim F. 07/02/2014
This part came with the trailer hitch I purchased.
It was very easy to transfer the ball from my 2" hitch and voila I am now ready to haul my trailer.
Jim F.
7/1/2015
am extremely satisfied with the products I purchased. I use theTow Hitch almost daily for my bicycle rack and a trailer I have to tow. The installation was a quick and easy. I have recommended your website to about 20-25 people over the past year. Hopefully you received some business from my recommendations. Thanks for following up. Not all companies take the time.
by: Mohan08/20/2023
The drop configuration is practically unusable with my Chevy Volt having low ground clearance. But works well with the rise, though i could use another inch for the trailer i have.. I use both 1-7/8" and 2" ball with this drawbar and no issues in 10 or so uses.
by: TJ08/20/2022
Worked great to keep the uhaul trailer I towed level even with lowering springs on my 2017 Mazda 3 Touring
by: Blah Blah Blah Motorcycles09/13/2023
Easy to use and haven't had any trouble towing my small trailer with motorcycle on board. Def recommend.
by: Herb J.09/07/2013
I was completely satisfied and very impressed thoughout my first experience with etrailer.com. The website provided exactly the educational material I need to correctly order the products. My order was unexpectedly upgraded for faster shipment, at no cost. The only glitch was the pin and clip were missing. After calling customer service they gave me several options. I bought the pin locally and etrailer.com promptly credit my account for my cost. I'm glad I found etrailer.com and heartily recommend them!
by: Poor Rate09/15/2017
Not very happy with getting a used or returned ball mount from etrailer.com, should not have any rust or dents when I buy a new one. Sending a mail to customer service for a RA#, hopefully they will correct this problem. The wiring harness I order was the other item I ordered and it was in good shape. My experience with them has been up to this point excellent.
by: Teresa07/02/2023
I did not give a 5-star because although it stated when I purchased the hitch set up it would accommodate to e-bikes, it was too short. I had to have a longer bar special made to fit our two e-bikes.
by: Charles07/07/2021
If it was not for etrailer, I would not have the hitch installed in a expedient manner. [towing company] could not come through with a installation or a hitch. Very grateful etrailer and my hitch in stock
by: Tony 04/20/2024
New condition, as it should be.
by: Barry01/14/2019
Fantastic, Carol. Everything went together beautifully. Just need to register the trailer, get a little practice driving with it and start hauling.
by: James 09/15/2023
Great drawbar!! Very well made.
by: Tim B10/17/2016
I bought this as part of the tow package for a Honda Fit. It has the rise I needed to match my trailer. I couldn't be happier with the e-trailer experience.
by: Craig F04/29/2018
Sending you a pic of my lights I got from you and the hitch with the full wiring system. All works great. Thank you so much. Now it's time to go riding!!
by: Udi04/15/2023
Fits perfectly to a VW ID4. It is essentially the only drawbar I could find that fits the ID4 specification of being up to 7 inch long and not more than 2 inch rise. In raised position it is very close to the bumper but does not touch.
The hitch pin was not included in the package. It was not an issue for me because I already had a pin. Also, I think that the ID4 require a bit longer pin than the one shown in the picture.
by: Oliver 02/29/2024
Pretty good..
by: Tim08/16/2022
You’re gonna love this! I put the hitch on my Corvette to haul a small luggage trailer on long trips. The hitch works great!
by: CD10/03/2021
Exactly as described, fit perfect. Seen here with ball and receiver.
by: Timothy06/05/2020
An extremely easy to use hitch with easy on-off for anyone to use.
by: John12/17/2019
I needed a hitch receiver for a 2016 kia soul i am using for the time being to pull a small trailer and for my bike rack. My 15 year old son helped me install it no problem and it works great. Saved me a bunch of money!
by: Scott04/13/2023
Instructions were very clear and the quality of the product is as good as advertised. It bolted right up with minimal effort, and that is coming from someone who has had recent health issues and has less than full mobility.
by: Lawrence11/17/2022
Recently purchased this item along with a 2" ball and a spare pin. Quality and fit for all items is "excellent". I have purchased from e-trailer for years and have always been pleased with product quality and the tech support has also been outstanding. Due to an incident during shipping of this order I have learned that the Customer Support from etrailer is also outstanding! I had shipping confirmation with tracking info for replacement items in less than a day from contacting them!
by: Greg 12/12/2021
Good quality. Galvanized pain is pretty rusty after one year thiugh.
Greg
12/12/2022
Working. Galvanized pin has not corroded more. My spelling has improved since last year!
by: Naomi04/25/2023
Nice quality because the shank that goes into the hitch is solid but hallow like the ones from other sources.
25
2130
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount
- Drawbar for Trailer Hitch of 2005 Pontiac G6For the Class II hitches that fit your 2005 Pontiac G6 like the Draw Tite part # 36426 the drawbar/ball mount you'd want would be the # 36065. Then for a hitch ball you'd want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch hitch ball.
view full answer... - Custom Fit Class 2 Hitch for a 2008 Mazda B2300 I have a custom hitch for your Mazda B2300 truck but the Curt Trailer Hitch Receiver item # C12923 will not fit. The bolt hole spacing is off. Instead, you will want the Curt Trailer Hitch Receiver item # C12012. This hitch also has a 1-1/4" class II receiver. The Curt Hitch item # C12012 is custom fit and attaches to your Mazda with included hardware. It will not require drilling. This hitch has a 350 lbs tongue weight and a 3,500 lbs towing capacity. If you plan on doing any towing...
view full answer... - Recommended Class I Hitch for a 2023 Kia Forte SedanThe best hitch for your 2023 Kia Forte Sedan is going to be the Draw-Tite Trailer Hitch item # DT83MR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class I hitch, with a 1-1/4" receiver, that weighs 32 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a picture below so you can see what this hitch looks like when installed. If you are planning on towing you will also need a wiring harness item # C54ER and the...
view full answer...
- Recommended Class I Hitch for a 2023 Kia Rio SedanThe best hitch for your 2023 Kia Rio Sedan is going to be the Draw-Tite Trailer Hitch item # 24964. This hitch is custom fit and bolts to your Kia with included hardware. This is a class I hitch, with a 1-1/4" receiver, that weighs 32 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a picture below, along with an installation video, so you can see what this hitch looks like when installed. If you are planning on towing you will also need the...
view full answer...
- Recommended Tow Package for 2018 Mazda 3 SedanTo set your 2018 Mazda 3 up for towing a light trailer you will need a trailer hitch, wiring harness, ball mount, and hitch ball. Starting with the hitch I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24912 because it offers the easiest install process that doesn't require any modification to the underbody trim panel on your vehicle like with the other available option. It is a Class I hitch that features a 2,000 pound towing weight capacity and will provide you with a...
view full answer... - Can a 2014 Ford Fiesta Sedan Tow a TrailerThe Draw-Tite Sportframe Trailer Hitch Receiver part # 24910 is rated for up to 2,000 lbs gross trailer weight and 200 lbs tongue weight. I can only imagine a small single axle utility trailer would fall within these metrics. That said, the 2014 Ford Fiesta which said trailer hitch is designed for is not rated for towing so if you want to do so then you will need to proceed at your own risk. I have attached a list of parts you will need if you would like to more forward with this: T-One...
view full answer...
- Recommended Class I Hitch for a 2023 Kia SeltosThe best hitch for your 2023 Kia Seltos is going to be the Curt Trailer Hitch item # C65FR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your bumper cover leaving only the 1-1/4" x 1-1/4" receiver visible. This is a class I hitch, with a 1-1/4" receiver, that weighs 27 lbs. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight. I have linked a couple of pictures below, along with...
view full answer...
- What Trailer Hitches Will Fit 2009 Toyota Matrix XRS Without Any Trimming Of The Rear FasciaOn the Draw-Tite Class I Trailer Hitch, # 24812, it will fit on your 2009 Toyota Matrix XRS with the lower rear fascia. The rear fascia has a center section that will have to be removed when you install the hitch. It is not hard to remove that section because it is made to be removed for a trailer hitch installation. Also needed for towing would be the Draw-Tite Ball Mount, # 3593, and either the Tow Ready 1-7/8 Inch Hitch Ball, # 19256, or the Tow Ready 2 Inch Hitch Ball, # 19258. The...
view full answer... - Will Removing Heat Shield to Install Hitch on 2020 Hyundai Sonata Cause Damage to VehicleThe heat shield needs to be removed in order to install the Draw-Tite # DT74MR on your 2020 Hyundai Sonata because it prevents the hitch from being in direct contact with the mounting surface on the underside of the vehicle. The good news is that the steel the hitch is constructed of will serve the same purpose as the heat shield, which is to isolate the vehicle underbody from the heat generated by the exhaust. In other words, removing the heat shield to install the hitch will not have...
view full answer... - Best Trailer Hitch and Wiring for 2018 Kia SoulThe best trailer hitch for your 2018 Kia Soul is the Draw-Tite # 24915 which fits all models of Kia Soul with the exception of the EV models. This hitch is your best option because of the reliability of Draw-Tite hitches when towing due to their welded steel construction. For wiring which will give your Kia a 4-way connector and allow you to power your trailer's lights I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118637 because it only requires you...
view full answer...
- Trailer Hitch Installation On 2015 Mitsubishi Lancer GTThe Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24885 is a confirmed fit for your 2015 Mitsubishi Lancer GT as long as you don't have the dual exhaust. There is no drilling required to install this hitch. The installation instructions state you will need a jig saw, cut-off wheel, or die grinder for enlarging the hole already present in the frame for the carriage bolt and block on the passenger side. I've attached the installation details which state...
view full answer... - Recommended Trailer Hitch Receiver and Trailer Wiring Harness for 2012 Ford Focus SEFor your 2012 Ford Focus SE, I recommend the Curt Trailer Hitch Receiver - Class I - 1-1/4" # C11158. This is a custom fit for both the sedan and hatchback as they install the same way and I've attached a video to assist. This is a no drill installation, but the heat shield underneath will need to be trimmed for fit. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118548. This will install behind your tail lights to the factory...
view full answer... - Recommended Ball Mount for 2014 Toyota Prius with Class I Hitch ReceiverThe Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24847 is 11-3/4 inches from the ground to the inside top of the receiver. For your 4 inch rise, the Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K # 3593 which is what we typically recommend for this hitch is not going to get you there. The Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs # 3594 is my recommendation for you because it give you the rise...
view full answer... - What is the Correct Ball Mount for a Draw-Tite Trailer hitch # 24815The Draw-Tite Trailer Hitch, # 24815, is a Class I trailer hitch. Only Class I accessories will fit. The reason is that Class I trailer hitches have a built in stop that will only allow Class I accessories so you do not accidentally overload the hitch. You can see this stop in the 4th picture on the product page. Also, with any Class I or II trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer otherwise you will void the warranty. The correct ball mount...
view full answer... - Parts Needed to Tow Smaller Trailer with 2016 Kia SoulWe do have all of the components you'd need to tow a small trailer with your 2016 Kia Soul. For a hitch you'd need to start with the part # 24915 which is a confirmed fit, for a ball mount part # 3593, 2 inch ball # 19258, and finally trailer wiring part # 118637. This hitch would have no problem with a small trailer and small ATV, but you really need to check your Soul's owners manual to determine what the manufacturer recommends as a towing capacity.
view full answer... - Can a 2007 Toyota Yaris Tow a Watercraft Trailer Using Draw-Tite Trailer Hitch # 24819The Draw-Tite Sportframe Trailer Hitch Receiver, part # 24819, will fit the 2007 Yaris Sedan and 3-Door Hatchback, but not the 5-door hatchback. I have included a link to an installation video for this hitch and also one to our main page for hitches for the 2007 Yaris. At the top of the page there is a drop-down menu (Select Vehicle Style) that will enable you to narrow the hitch results to just those suitable for your particular Yaris. All of the hitches we offer for the Yaris are Class...
view full answer... - Can Class II Accessories be Used in Curt Class I Trailer Hitch # C11204The Curt trailer hitch # C11204 is a Class I trailer hitch. The receiver does have that collar but the hitch does not have that punch in it that will only allow Class I accessories to fit. Even though they would physically go into the hitch, you cannot use a Class II accessory in a Class I trailer hitch. Class I hitches have a lower capacity and needs accessories that is made for it. They could easily be overloaded. If you are wanting to tow with it be sure to check the vehicle owner's...
view full answer... - Recommended Hitch Receiver And Towing Components for 2016 Ford Focus SE HatchbackThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11158 is a confirmed fit for your 2016 Ford Focus SE hatchback. You will also need the ball mount # 3593 and a hitch ball like # 19258 for a 2 inch diameter or # 19256 for a 1-7/8 inch diameter to match your trailer coupler. For your trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118674 confirmed to fit your hatchback. This wiring connects to your factory wiring located...
view full answer... - Trailer Hitch & Wiring for 2017 Nissan JukeWe do show confirmed hitch fits for the 2017 Nissan Juke, for non-NISMO models. You can see all products on the linked page. We do have Curt options but I suggest the lower-price Draw-Tite. If you have the AWD model you can use Draw-Tite Class I hitch # 24867; if you have the FWD model you can use the Draw-Tite # 24892. For both you can use ball mount # 3593, either 1-7/8-inch ball # 19256 or 2-inch ball # 19258, and 4-pole wiring harness # 118528. This is a powered converter harness.
view full answer... - Wiring Harness to Work with LED Lights on 2013 Kia Soul and Other Parts Needed to Tow a TrailerThe wiring harness option for LED bulbs is for the vehicle not the trailer. So you will choosing a harness whether the 2013 Kia Soul has LED lights or not. At least in theory, because if you pay even closer attention to the harnesses available you'll notice that they are the same for LED or non-LED. For example, the Tekonsha # 118637 is confirmed to work with or without LED lights. For the trailer hitch receiver I suggest the Draw-Tite Sportframe # 24839. It's a Class I hitch receiver...
view full answer... - Trailer Hitch Receiver Fit for 2015 Chrysler 200There is a trailer hitch receiver for your 2015 Chrysler 200, and for that I highly recommend the Draw-Tite Trailer Hitch Receiver # 24919. This is the best option for your Chrysler because of Draw-Tite's reputation for quality and its easy installation. If you C56242, Draw-Tite Drawbar # 3593, and 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258. I have added a link to a video install for you to check out as well on a 2015 Chrysler 200 of the Draw-Tite Trailer Hitch Receiver # 24919.
view full answer...
- What Hitch Fits a 2016 Mazda 3 Hatch i-TouringWhen it comes to "Vehicle Style" in our fit guide, there are 4 options in the drop down menu for a 2016 Mazda 3 - "Hatchback - with LED Taillights", "Hatchback - without LED Taillights", "Sedan - with LED Taillights", and ""Sedan - without LED Taillights". Since you mentioned your Mazda was a Hatch i-Touring, that narrows things down to the pair of hatchback options. Choosing either one of those options from the drop down menu will bring you to the two available hitches, the Draw-Tite...
view full answer...
- Trailer Hitch and Towing Accessories Recommendation for 2018 Ford Fiesta SedanWe can certainly help you with that! The Draw-Tite Class I receiver hitch you've looked at, part # 24910 would be a fit for your 2018 Ford Fiesta sedan. If you're planning on doing some light-duty towing with your Fiesta, you'd need a few other items to complete your towing system: Trailer wiring harness, part # 118766 Ball Mount/hitch pin and retaining clip, part # 3593 1-7/8 inch trailer ball # 19256 2 inch trailer ball # 19258
view full answer... - Installation Warranty and Transmission Cooler Recommendation for Trailer Hitch on a 2010 Ford FocusThe Draw-Tite Class I Frame Trailer Hitch, item # 24805, is bolted to the vehicle frame using existing holes. No drilling or welding is required. All installation hardware to connect the hitch to the vehicle is included. You will need to trim a small amount the heat shield around an attachment hole (see helpful links). The hitch has a towing capacity of 2,000 pounds and a tongue weight capacity of 200 pounds. You will need to check your owners manual for the towing capacities of your vehicle. A...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Mike S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Don W.
9/3/2023
Some opinion even after a year of yse!!! Very well made and heavy duty!!!