Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
(2000 reviews)
Price: $41.37
In Stock
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Item # C45520
Retail:$71.02
Our Price: $41.37
You Save: 42%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2000)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45520
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Rise - 3 Inch
- No Ball
- 3500 lbs GTW
- Class II
- CURT
- Steel Shank - Gloss Black
- 3/4 Inch Ball Hole Diameter
Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Drawbar can be used in rise position only
- Sturdy steel construction with solid shank
- High-quality manufacturing process
- CNC-machined for strong, consistent cuts and welds
- 7-Stage washing method delivers smooth, clean surface
- Corrosion-resistant, black gloss powder coat finish
- Hitch pin and clip or hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Compatible with Class l and Class ll hitches
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
- Length: 9-1/4" from center of hitch pin hole to center of ball hole
- Rise: 3-1/8" from top of inside of hitch opening
- Ball hole diameter: 3/4"
- Pin hole diameter: 1/2"
- Limited lifetime warranty
D-20 45520 Curt Ball Mount - 3-1/8" Rise - 3,500 lbs
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs - C45520
Average Customer Rating: 4.8 out of 5 stars (2000 Customer Reviews)
Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.by: Stephen05/17/2024
great product great service I bought the hitch took me 15 minutes to install it on a 2004 civic fast shipping great company thanks
by: Jared03/12/2018
I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off.
by: Roy04/07/2022
Good and strong but not a great angle/height for my application so had to go to a straight line fit.
Roy
4/8/2023
I had to change from a hitch to a straight hitch due to the height of the receiver. That lined up perfectly without shimming or adjustments. Good tight fit and I added the bar to receiver clamp to eliminate rattle and movement. Great set up and works great and even looks good.
by: Donald 05/01/2023
Perfect fit for my small boat trailer.
by: Max A.08/04/2019
I was very suspicious how will it fit and suit Dodge Challenger. But when I received trailer hitch, and by they way it travelled across the planet to reach me, I was totally impressed with the quality, ease of installation and accessories which I ordered with it. I basically installed it myself with a help of a friend, it took about 30 minutes to fix it. It really saved me as I needed the trailer to transport my bike to the race track and I didn't want to change the car.
So the conclusion, I own it for more than a year and have zero issues or complaints about the hitch or accessories. I used to travel long and short distances and in average I use it every second week. You barely can notice it when you remove drawbar so it is very good solution.
by: KL12/14/2016
Easy installation. Helps to have two people, however, I installed it alone with the help of jack stands. I highly recommend the Curt receiver. I have another Curt receiver on my 2011 Honda Accord that I also purchased from etrailer.com.
I just finished hauling a load of bush and tree trimmings to the dump with my utility trailer. Attached is a close up photo of the receiver in use.
by: Thomas05/24/2019
Product comes basically unusable due to a lazy omission of the pin needed to connect the hitch receiver and tongue. This part must be purchased separately from an outside source if the absence is not realized in time, rendering the entire experience troublesome and inconvenient. Customer service is defensive and unable to convey empathy or remorse for customer dissatisfaction. Would strongly discourage future customers from considering this company.
Mike L.
5/25/2019
The pin and clip is sold separately as part F-4, as stated in the product description.
by: Bryan 06/29/2023
Works exactly as expected.
by: Barry03/17/2020
I bought this riser to level out my trailer to get rid of some trailer sway issues i was having. However it fit so loose that even with nothing on the trailer it was all over the place and scary. My trailer did not do this before at all. I got some composite shims and jamed them in there on 3 sides. Then managed to find a way to keep them in place...it worked but was a lot of cussing and swearing to finally get it to work....but since then its been good...product is 2 star...added a star for shipping time.
by: Lawrence12/06/2019
Everything was great and it was a quick delivery. Unfortunately. I was expecting a hitch pin but it was not included.
by: Roger R.08/13/2017
Got my two orders, a trailer hitch, draw bar, pin and ball, didn't order all the 1st time. It was easy to find everything I needed on the site. The videos that showed how to install the hitch and wiring on my particular vehicle were to the point and easy to follow. at least one tip the guy gave, was to get yourself some extra zip ties, which I did and found it to be a great tip, (don't remember if he mentioned length, but I got some 8 or 10" and at a couple points it made it easier, It may have something to do with my age). Without the videos, I most likely wouldn't have tried to install any of it myself, it took me about 6 hours or so with breaks here and there but I am very satisfied. would add pictures but not at all tech savvy, have everything I need, just can't get them on there. Thanks all at etrailer for making something I put off for a long time, easy. Thanks again! R.R.
by: Randy B.03/09/2014
The hitch, ball mount pin, clip and wiring kit were all perfect for my vechicle and good quality products. The free shipment was very fast. The phone conversation was courteous and helpfu. I am very satisfied with the entire process.
Big thanks to e-trailer!
by: Bruce 12/26/2020
It is on the vehicle but haven't used it yet. Will be using it his spring to haul a small trailer home
Bruce
1/3/2022
works fine,took a small trailer from Fl to Maine
by: Kevin s07/31/2016
The hitch and associated pieces worked exactly as promised, really appreciated the wiring harness directions, they were spot on for my car, especially liked the video's
by: Timothy 12/31/2019
It's a awesome hitch and it fits perfectly good on my 1986 chevy elcomino to pull a trailer some time
Timothy
1/1/2021
It does a awesome job
by: Ernie P03/30/2017
I bought a Curt trailer hitch for my 2005 Chrysler Town and Country minivan, with Stow and Go seating. I spoke with Kevin from etrailer.com who was very helpful and confirmed the part numbers for the hitch, wiring harness, and drawbar, and took my order. They arrived at my house on the next day.
The parts arrived in two boxes - one large box for the hitch, the other smaller box for the wiring harness and drawbar. The parts were all there, and correct, with installation instructions included. I spent about an hour installing the hitch itself, including jacking up the rear of the van to gain access to the underside, installing the hitch, and letting the car down. The instructions were spot-on. The wiring took less than an hour. I cleaned up and waxed the area behind the tailights, and routed the wiring carefully. The wiring was a perfect fit. Again, the instructions helped considerably.
The free shipping was a selling factor, plus their lowest price pledge saved me a little over $30.00. I am glad I decided to purchase the hitch and accessories from etrailer.com.
by: Dietrich V.12/19/2014
My second Curt hitch. I like the appearance of the round tubular hitch. Service reliable and delivery quick. The only shortfall on the instructions was that it was not clear which holes in the frame got the bolts that were fished in, and of course I got it wrong the first time. I had to remove both bolts to reinstall in holes farther forward. Otherwise, fine product and instructions.
by: Ronald S12/11/2017
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
by: Mike N04/11/2019
I ordered this ball mount with the recommendation based on vehicle application. I found it to be an accurate fit with just the right amount of rise to level my trailer. After a year of winter salt spray the finish still looks great!
by: Daniel07/14/2018
I have ordered from eTrailer before and have been very pleased with their products and service. This order was no different. The item arrived in a timely matter; was packaged nicely and exactly as described on their website. The product fits perfectly and looks great! I haven't pulled anything yet with the ball mount however I do not anticipate any trouble from it. eTrailers parts are always of good quality.
by: Dennis W10/29/2016
Worked with Carmel, she made ordering my hitch and accy's easy and quick.
Speaking of quick she told me that she would place the order and that it should go out within 4 working days. I received my complete order within 3 days. Now that was fast.
If you need a hitch get it from etrailer, one stop shopping!
by: Dalton05/19/2018
Works great! Towing my trailer everywhere I need it to go
Dalton
5/20/2019
Great! still works just as it suppose to!
by: Michael 09/30/2020
The video on etrailer was extremely helpful in deciding width and length of the draw bar I needed. Turns out to be perfect. I ordered after 7pm and received notice that the item shipped within 3 hours, so needless to say the care, attention, fast shipping and reasonable prices makes etrailer second to none.
25
1994
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Recommended Trailer Wiring Harness for a 2014 Volkswagen Jetta GLICorrect, the GLI models have different tail lights so you won't be able to use a plug-in trailer wiring harness. That said, we do still have an option in the Curt Tail Light Converter with 4-Pole Flat Trailer Connector part # C56496 which will hardwire directly into the wires behind the tail lights. It provides a 4-pole/4-way connector which is the most common and widely used. If you don't already have a trailer hitch picked out then I recommend adding the Curt Trailer Hitch Receiver...
view full answer... - How to Measure the Rise of a Ball Mount for a Chrysler PT CruiserThe rise is the distance from the top of the shank to the top of the ball platform, with the ball mount in the position (rise) it will be used in. I am including a link to a FAQ page that will describe how to measure and choose the correct ball mount. The 2004 Chrysler PT Cruiser uses a Class I 1-1/4 inch hitch. All Class I hitches have to use the ball mount that is recommended from the manufacturer. The Draw-Tite Ball Mount, part # 3593, is the ball mount that is recommended for the...
view full answer... - Recommended Trailer Hitch for 2019 Volkswagen JettaThe available 1-1/4-inch Class I hitch options for your 2019 Jetta include the Curt round tube hitch # C11540 and the Draw-Tite model # 24978. The Curt offers easier installation but its cross tube will be visible under the bumper cover. The Draw-Tite hitch installation requires removal of the entire bumper fascia and the bumper itself but gives you a much more discrete appearance once installed. The linked photo shows the Draw-Tite hitch. Both hitches include all of the required mounting...
view full answer...
- Trailer Hitch for a 2011 Kia Forte KoupFor trailer wiring you would have to visit a Kia dealer since there are no confirmed aftermarket fits. Curt trailer hitch # C11019 is the only trailer hitch that fits your 2011 Kia Forte Koup. This is a Class I trailer hitch so any accessories that you use, bike racks or cargo carriers, would have to be rated for use with a Class I trailer hitch. Also, if using the hitch for any non-trailer load (bike racks and cargo carriers) Curt says you have to use stabilization strap # 18050 for...
view full answer... - Correct Ball Mount and Hitch Ball for Use with Curt Hitch # C11222 on 2014 Camaro ConvertibleThe Curt Class I trailer hitch you referenced, part # C11222, is a correct fit for your 2014 Camaro Convertible without the ground effects package. The recommended ball mount for use with this light-duty hitch is part # C45520 from Curt, and this ball mount has a rise of 3-1/8-inches. It can only be used in the rise position. With this ball mount you can use either 1-7/8-inch ball # C40001 or 2-inch ball # C40018. Your trailer coupler will be labeled or stamped with the size ball that...
view full answer... - Recommended Trailer Hitch and Wiring for 2018 Hyundai Tucson Sel PlusWhen we research towing capacities we base it off of what the owner's manual says but for some unknown reason there are no online manuals available for a 2018 Hyundai Tucson. I did take a look at the Hyundai website and as you said it listed the SEL Plus as having a 2,000 lb towing capacity as opposed to the 1,500 lb capacity of the SE and SEL; however, it looks like the SEL Plus only has some interior features differentiating it from the SE and SEL so it would not make sense for the capacity...
view full answer...
- Trailer Hitch Receiver Fit for 2012 Ford Mustang Boss 302We do have a trailer hitch receiver I can confirm is a fit for your 2012 Ford Mustang Boss 302, which is from Curt: - Curt Trailer Hitch Receiver # C11210 I confirmed with Curt that this is a fit for your '12 Mustang Boss 302. Since this is a Class I hitch, if you are planning on using it for an accessory like a bike rack, you'll need a Class I-compatible rack such as the Swagman Chinook # S64683. Or, if you plan on doing some light towing with the Curt Trailer Hitch # C11210 and your...
view full answer... - Taking Out the Play Between Ball Mount and Receiver on 2011 Subaru Forester with OEM Trailer HitchThe issue that you are having seems to be a common one with Subaru OEM trailer hitches. But I have to warn you against drilling any additional holes because doing so can actually reduce the capacity of the ball mount and make it structurally unsound. The best option for you is to use an anti rattle device of some kind. The simplest option is # RM-061-125. This little guy clamps itself between the ball mount and the receiver opening and takes up the play. I have included a link to a video...
view full answer... - Hitch Recommendations for a 2015 Chevy CamaroYes, the Curt Hitch # 24850 would fit your 2015 Chevy Camaro as long as it is a coupe without ground effects. If you had a convertible you would want the # C11222. For a ball mount you would want the # C45520, and balls # 19256 and # 19258. For trailer wiring you would want the # C56197.
view full answer... - 2015 Volkswagon, Golf TDI Sportwagon Hitch RecommendationFor your 2015 Volkswagen Golf SportWagen TDI you can use Curt trailer hitch # C11411. If you need trailer wiring for your vehicle I recommend part # 118646. If you are planning on towing, I recommend the Curt Ball Mount, part # C45520. For a hitch pin and clip you need part # F-4. If you need a 1-7/8 inch hitch ball you can order part # C40001, and for a 2 inch hitch ball I recommend part # C40018.
view full answer... - Can 2014 Ford Mustang be Used to Tow Motorcycle TrailerAccording to the online owner's manual for your 2014 Ford Mustang you can tow up to 1,000 lbs. So if you can find a trailer that weighs under 1,000 lbs with your motorcycle loaded you will be just fine. I recommend installing the Curt Trailer Hitch # C11210 on your Mustang because it has a collar around the receiver which can be used for more stability in certain applications. For wiring I recommend the T-One # 118487 because of how reliable we have found the Tekonsha wiring to be. Then...
view full answer...
- Trailer Hitch Recommendation for 2002 Pontiac Grand Prix SE Sedan to Tow Small TrailerThe best trailer hitch we offer for your 2002 Pontiac Grand Prix SE Sedan is the Curt Class II hitch part # C12199 which has the highest capacity of all of the hitches we offer, is made in the USA, and will only have the hitch opening hang down below for a more concealed look. Then for trailer wiring you'd want the Tekonsha kit part # 18252 for a 4-way. Then for a ball mount you'd want Curt ball mount part # C45520 and for a hitch ball either # C40018 for a 2 inch ball or part # C40001...
view full answer... - Complete Towing Set up For 2005 Buick LeSabreHappy to help and we can get your 2005 Buick LeSabre completely set up to tow a trailer. What you'll need is a hitch, wiring, a ball mount, and hitch ball to do this. The exact parts that fit your '05 LeSabre are the following: - Curt Trailer Hitch Receiver # C12044 - Hopkins Active Tail Light Converter with Install Kit # 46255 - Curt Drawbar for 1-1/4" Hitches # C45520 - 2" Hitch Ball # C40018 or 1-7/8" Hitch Ball # C40001 - Curt Hitch Pin and Clip # F-4 While you (very understandably)...
view full answer... - Is 1-7/8 Hitch Ball Available for Curt Trailer Hitch for 2017 Nissan Versa?There is a way to get a 1-7/8" Hitch Ball, you would simply order Curt trailer hitch # C11256 along with Ball Mount # C45520 and 1-7/8" Hitch Ball # C40001; you will also need Pin and Clip # F-4 to secure the ball mount. Please keep in mind this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video for you which shows you how the...
view full answer... - Fit of Curt Class I C11117 Trailer Hitch on 2001 Pontiac Trans AmAccording to Curt Manufacturing, the # C11117 is a fit for all models of the 2001 Pontiac Firebird, including the T/A. For trailer wiring, you'll want to use # 119178KIT. Curt recommends the # C45520 ball mount along with the # PC2 hitch pin and # A-80 for a 1-7/8 inch or # A-82 for a 2 inch hitch ball. I'll link you to our return policy.
view full answer... - Trailer Hitch Fit for 2013 VW Jetta Hybrid SedanThere is just one trailer hitch receiver I can confirm directly from the manufacturer is a fit for your 2013 Volkswagen Jetta sedan, though not the Draw-Tite you referenced. For a 2013 VW Jetta Hybrid sedan, the trailer hitch receiver I can confirm fits is the Curt Trailer Hitch Receiver # C11474. If you plan on doing any towing you will also need the Wiring Harness # 118572, Drawbar for 1-1/4" Hitches # C45520, Pin and Clip # F-4, and either 1-7/8" hitch ball # C40001 or 2" hitch ball...
view full answer... - Installation of Curt Class II # C12280 Hitch on 2005 Chevy Malibu MaxxTo install the Curt Class II # C12280 hitch on a 2005 Chevy Malibu Maxx, you would need to drill two holes, one in the underside of each frame rail, as outlined in the instructions I've linked you to. If you'll be doing some light duty towing with your hitch, you might also need the following: Trailer wiring harness, part # C56013 Ball mount, part # C45520 1-7/8 hitch ball, part # C40001 2 inch hitch ball, part # C40018 Locking hitch pin, part # e98882
view full answer... - Trailer Hitch and WIring Recommendations for a 2014 Chevy Sonic SedanYes, Curt trailer hitch # C11240 will fit your 2014 Chevy Sonic sedan. I have linked a video to the right showing installation of the trailer hitch for you. If you plan on using the hitch for a bike rack or cargo carrier please make sure that the accessory is rated for a Class I trailer hitch. Also, with bike racks or cargo carriers Curt requires the use of stabilization strap # 18050 when using those items or any non-trailer load in the hitch. If you want to tow you will want to consult...
view full answer... - Hitch Recommendation for a 2013 Nissan Leaf Model SYes, the Curt Hitch part # C11396 will fit your 2013 Nissan Leaf S model as this hitch fits all models of the 2013 Nissan Leaf. If you want to do some light duty towing you will want the following parts: The recommended ball mount for this hitch is # C45520. The recommended pin and clip is # F-4. The recommended 1-7/8" hitch ball is # C40001. The recommended 2" hitch ball is # C40018. You will want to consult the owners manual of your vehicle to determine if there are any restrictions...
view full answer... - Does Curt C12027 Class II Hitch for 2004 Chevy (Malibu) Classic Include the Drawbar/Ball MountThe Curt Class II hitch, part # C12027 doesn't include the ball mount, hitch pin and trailer ball. Those are sold separately. In order to tow with your hitch, you'll also need a trailer wiring harness. For a wiring harness, I'd recommend # C56175. For a ball mount, use # C45520 along with # PC2 for a hitch pin and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball. I've linked to a video showing a typical installation of the wiring harness I recommended.
view full answer... - Can 2007 Dodge Caravan with Curt Hitch # C12289 Tow a Car Trailer and Sportscar Weighing 1700-lbsAccording to my research the 2007 Dodge Caravan with Stow-N-Go seats has varying towing capacities depending on the version. The SXT with 3.8L V6 engine has a maximum tow rating of 3800-lbs while the C/V and SE versions with the 3.3L engine have a maximum tow rating of 2000-lbs. The Curt 1-1/4-inch Class II hitch you referenced, part # C12289, itself has a towing capacity of 3500-lbs. We also offer a 2-inch hitch from Curt, part # 13389, which has the same towing capacity. For reference...
view full answer... - Trailer Hitch Receiver and Towing Capacity for 2007 PT CruiserAccording to the owner's manual I looked up online, your 2007 Chrysler PT Cruiser has a maximum towing capacity of 1,000 lbs and tongue weight capacity of 110 lbs. You'l want to verify that in your copy of the manual, but so long as you meet those capacities you are able to tow. There are two options for a trailer hitch receiver for your vehicle, the Draw-Tite # 24759 and Curt # C11132, and I highly recommend the Curt because it does not require drilling to install while the Draw-Tite...
view full answer... - Hitch Recommendation for a 2015 Honda CR-ZThe Curt Hitch part # C11077 that you referenced has been confirmed to fit your 2015 Honda CR-Z so I would recommend it for you. For a ball mount you would want the # C45520, and then for hitch balls # 19256 and # 19258.
view full answer... - How To Transport an Electric Wheelchair Scooter with a 2017 Nissan VersaI do have an option for you but there are only class I, 1-1/4" trailer hitch options available for your 2017 Nissan Versa. That said, the Nissan Versa is most likely not capable of handling the tongue weight that your electric scooter and lift will have. Therefore, the only option you are going to have is to put the scooter on a trailer or find a different vehicle to carry it on. If you were to go with the trailer option then for this we have the Detail K2 Mighty Multi A-Frame Utility...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
4/14/2022
To choose a ball mount with the correct rise and , you will first need to take two measurements. Measurement A will be the distance from the top of the hitch receiver opening to the ground, making sure that the ground is level. Measurement B will also need to be on level ground and it will be from the bottom of the trailer coupler to the ground. Then take the difference between the two. If your hitch height is greater, use a ball mount with a closest to the difference that was measured. If your coupler height is greater, use a ball mount with a rise closest to the difference that was measured. The goal is to make it as level as possible.
Helpful Links
faq-ballmount.aspx