Custom Fit Class 2 Hitch for a 2008 Mazda B2300
Question:
will this fit a 2008 mazda b2300 2wd pickup
asked by: Tim H
Expert Reply:
I have a custom hitch for your Mazda B2300 truck but the Curt Trailer Hitch Receiver item # C12923 will not fit. The bolt hole spacing is off. Instead, you will want the Curt Trailer Hitch Receiver item # C12012. This hitch also has a 1-1/4" class II receiver.
The Curt Hitch item # C12012 is custom fit and attaches to your Mazda with included hardware. It will not require drilling. This hitch has a 350 lbs tongue weight and a 3,500 lbs towing capacity.
If you plan on doing any towing you will need a wiring harness item # 118325, a ball mount item # 3593, and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
If you need a class III hitch with a 2" receiver then I recommend the Curt item # 13138.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can Nylon Bushings for Trailer Suspension be Used with Wet Bolts
- Q&A: Does Gen-Y Hitch Gooseneck Trailer Hitch # GY23XR Fit 2024 Chevy Silverado 3500
- Q&A: Recommended Replacement for Atwood G6A-7 Water Heater
- Q&A: Recommendation for a Class I Ford Focus to Transport a Mobility Scooter on a Cargo Carrier
- Q&A: Can a 100 Pound Mobility Scooter Fit a Pro Series cargo carrier on a 2014 Ford Focus w/Class I Hitch
- Q&A: Ground Clearance For a Curt Trailer Hitch Receiver # C94WR On a 2023 Hyundai Tucson
- Q&A: Recommended Timbren Suspension Enhancement for 2019 Ram 3500 Dually
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Wiring Diagrams
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Best Bike Racks for Electric Bikes