In regards to the Replacement Swivel Collar for Roadmaster Tow Bars part # RM-9200-6, the diameter of the pin used to secure the collar to the base plate kit is 3/4" diameter and the width of the collar here it attaches to the base plate kit is 2-1/8". The distance between the two tabs which attach to the tow bar end are 1-9/16". I went out to our warehouse to measure these for you.
I have attached a photo below of these dimensions as well. view full answer...
The Peterson Interior Light part # 433600 that you referenced draws 28 watts or 2.33 amps so if you were to install an inline fuse you'd want it to be right at 3 amps. view full answer...
No it won't but I have a comparable option. The B&W Companion item # BWRVK3500 requires a square gooseneck ball receiver so it won't work with a Draw-Tite set up. Instead you are going to want the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter item # DM8550045.
The Demco Recon attaches to your gooseneck ball and has a 21,000 lbs capacity. This hitch has a 360-degree jaw that provides complete jaw to kingpin contact. This system minimizes the chucking, jarring and noise that can... view full answer...
I went out and measured all of our stock of the Replacement Nylon Cap # AM3664-2 and all of them measure 1.755".
It sounds like your ball will just need to be completely replaced, but as there's a few that use this cap just send me a picture of what you have and I can find you a complete replacement. view full answer...
Since you already have a Blue Ox tow bar you are going to want the Blue Ox Base Plate Kit item # BLU93FR. This base plate kit has removable arms that will leave your Colorado looking as close to factory as possible when you are not flat towing. This fits the 4WD models without adaptive cruise control.
The other parts you will need to flat tow your 2018 Chevy Colorado are listed below. I have also attached any installation videos and instructions so you can see the process for getting... view full answer...
Yes, there is a B&W Companion hitch that will fit in the puck system of your 2023 Ram 3500. It is the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package item # BWRVK3670. This 5th wheel hitch has a 20,000 lbs capacity and will mount directly in the puck system for easy installation and removal. The slider base will provide you with 12" of travel to help with making tight turns.
I have linked an installation and review video below so you can see how to get the Companion set... view full answer...
I went out to our warehouse for you and measured the BullRing Stake Pocket D-Rings part # BU58FR, the distance from the edge of the ring to the end of the plate is 7/8". view full answer...
Tongue weight is typically between 10% and 15% of your trailer's total weight depending on what you have loaded in the back and on the tongue. This would give your 8,500 lbs trailer a tongue weight range of 850 lbs to 1,275 lbs. With this in mind I recommend using a different system like the Blue Ox TrackPro Weight Distribution w/ Sway Control item # BLU27FR. This system has a tongue weight range of 1,000 lbs to 1,300 lbs which would be perfect for your Grand Design.
If you are set on... view full answer...
We don't offer any axles or hubs that are compatible with that wheel bearing set, but a 1-3/4 inch square axle would typically carry a 1000-2000 lb capacity.
If you were needing a replacement axle, I'd be happy to look through our offerings of off-the-shelf axle sizes and check if we have anything that would be compatible. I'd need to know the hub face to hub face distance and the center to center spacing of the spring seats. I'd also need to know the wheel bolt pattern. view full answer...
I was able to find the weight for you of the Curt A30 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package # C16070, which is 145 lbs.
The head unit is nearly 100 lbs with the legs making up the rest of the weight. And while it's heavy, there is a 1-pin removal system for the head unit to make it somewhat easier to remove the hitch from your truck bed, though a helper would likely be a good idea.
I have added a link below to a video review for you to check out as well of the Curt... view full answer...
When the Swagman XTC4 Cross Country 2-Bike Rack, item # S64665, is folded for transport without bikes there is three inches of clearance between the center of the hitch pin hole and the closest part of the bike rack to the vehicle. The farthest back part of the bike rack, when folded, (farthest away from vehicle) will be 12 inches from the center of the hitch pin hole.
When carrying bikes the rack is angled upwards somewhat to provide enough ground clearance for the rack. view full answer...
When trying to figure out the maximum towing capacity on a vehicle such as your 2020 Ram 1500 Classic Warlock, you are limited by the lowest rating between the trailer hitch receiver and the vehicle.
From some research I did online I found that with the specifications you mentioned, and depending on bed length and if your truck is 2WD or 4WD the maximum towing capacity listed is between 4550lbs and 4360lbs.
While the etrailer Trailer Hitch Receiver # e98852 allows for a maximum gross... view full answer...
Draw Tite and Curt/etrailer rate their hitches independently from one another which is why it's often that the hitches will be rated for different capacities. This is why the Draw Tite hitch part # 75952 is rated higher than your 2018 Nissan Murano.
The overall towing capacity is always the lowest rated component in the setup as you are only as strong as your weakest component. view full answer...
At the widest point (center) the rear trim pieces of the Putco Stainless Steel Fender Trim for Ford Super Duty # P97217 are 2" wide. view full answer...
The Spring-Eye Bolt with Locknut for Slipper Springs # 166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4". view full answer...
The Roadmaster Guardian Rock Guard item # RM-4000 includes the mounting brackets and the plastic shield portion. Also included is the four bolts required to attach it to a Roadmaster base plate.
The Rock Guard is not compatible with EZ5, MS, or MX baseplates. If you would like me to verify yours works I would just need you to email me back the part number.
The mounting brackets and hardware are also able to be purchased separately if you are towing different vehicles item # RM-4000-1.
I... view full answer...
The height of the handle on the Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier for 2" Hitches # 310-VTG002 is 13-1/4". I attached a photo to illustrate this and I also included a demonstration video for you to check out. view full answer...